PDA

View Full Version : bg camber adjustments


mcwilly
31-08-2008, 02:15 PM
hi
i was just wondering what the recommended camber figures are front and back on a bg astina.

also what camber people recommend. (from experience)

mine is currently running positive camber all round by about 0 degrees 50 minutes

thanks

project.r.racing
31-08-2008, 02:26 PM
Normal street driving = Good settings for minimal tyre wear.
F= -1.0
R= -0.5

Performance driving = Better high speed handling, but increased tyre wear.
F= -2.0
R= -1.0

My car = I would prefer more on the rear, but wheel would hit springs if i run anymore.
F= -1.5
R= -0.5

Performance settings could be higher. It's all about testing and seeing what works for you.

Ryan

mcwilly
31-08-2008, 02:29 PM
so should never be positive?

project.r.racing
31-08-2008, 02:33 PM
so should never be positive?you can, but it will have increased tyre wear on the outside and poorer handling.

mcwilly
31-08-2008, 03:06 PM
ok thanks for this. i dont know if the bg has enough adjustment to get -2.0 on the front

project.r.racing
31-08-2008, 03:08 PM
ok thanks for this. i dont know if the bg has enough adjustment to get -2.0 on the frontcamber bolts or adjustable strut tops allow you to do this.

camber bolts cost $20 each.

mcwilly
31-08-2008, 03:21 PM
sweet ill have to get some camber bolts then. adustable strut tops arent available for bg