PDA

View Full Version : Att - BA V6 Owners - Pic needed

ROB-80E
13-04-2009, 10:43 AM
Hi guys, just wondering if one of you can help me out.

I need a picture of the back of one of the front hubs that shows the CV joint, ABS ring and ABS sensor.

I'll upload a pic shortly to show you what i mean.

Hope someone can help....

Cheers
ROB.



EDIT - Mods, please move this to appropriate section.
ROB-80E
13-04-2009, 11:07 AM
This is what I'm after guys. This pic is the passenger side and was taken with the car on the ground and wheel full lock right. If you can get me something like this it'd help me out heaps.

http://img18.imageshack.us/img18/5273/img2247t.jpg
ROB-80E
15-04-2009, 08:07 PM
No one at all?
Cosmo Dude
15-04-2009, 08:15 PM
Kinda like this 'n'
Raving
15-04-2009, 11:40 PM
No one at all?

Was gonna, put don't have ABS so figure the ring and sensor won't be there :/ Can get a pic regardless if you're still after one?
ROB-80E
18-04-2009, 05:56 PM
Thanks Cosmo...that's close enough.

I actually found one at a wreckers today and the setup was the same as what you've posted. What has caused me all this trouble is that I have been supplied different sensors right from the start. Grrr.

I'm about to have a search, but does anyone know where i can get a circuit diagram of the BA ABS? The front sensors read open circuit which is different to the ones i currently have (1.1Kohm). Just need to know if they are supplied power or something different like that to get the induced voltage out.

Cheers.
Cosmo Dude
18-04-2009, 06:19 PM
The sensor should read between 1.6 and 2.0Kohm. If you read across the sensor it should read between 0.25 and 3.0 volts AC if you rotate the wheel at one revolution per second.
The sensor should be 0.3 and 1.1mm from the ABS ring.
ROB-80E
18-04-2009, 06:26 PM
Cheers mate, that's all the info i needed!! :D So going on that, as i thought, they work the same as the ones I've been playing with.

Shame i'm getting sweet f/a across the 2 BA sensors i picked up today. Surely they both couldnt have been stuffed. :S
Cosmo Dude
18-04-2009, 06:46 PM
You're doing better than me. I picked up a pair of V6 hubs from a non ABS car a few weeks back.
Oh well it's for the hatch which doesn't have ABS.