PDA

View Full Version : BA Astina Stock Height

project.r.racing
03-07-2009, 11:04 AM
Hi all,

Just wondering what the stock height of a BA Astina is?

Mine hasn't been the stock height since 2003. And I'm an old fart and cannot remember what it was.

Can someone when the got a spare few moments, measure the distance from the centre of the front and rear hubs, to the top of their wheels arches please?

http://i39.photobucket.com/albums/e189/deejayryry/coilovers002-1.jpg

The above picture has the wheel removed. Please measure with the wheels on and the car on a flat surface please.

Cheers,
Ryan
Rix
05-07-2009, 01:39 PM
You can come look at mine if u want sometime?
Cosmo Dude
05-07-2009, 02:46 PM
400mm+- front and back on my gen 1 hatch
70NYD
23-07-2009, 04:12 PM
just out of curiosity ( i wanna c whos is lower :p) whats your distance there? i just measured myn and its 315
project.r.racing
23-07-2009, 07:37 PM
310/305
Cosmo Dude
23-07-2009, 08:28 PM
You just know it's gonna be Rupewrecht who is lowest.
project.r.racing
23-07-2009, 08:33 PM
Dunno, his Cucso front and rear camber tops add height a little. Maybe 20mm I think from memory? and may not matter due to the JICs fitted.
70NYD
23-07-2009, 09:14 PM
damn haha i looze :(
Rupewrecht
23-07-2009, 09:16 PM
Ah, will check on the weekend as it's parked on a hill atm.

But the Cusco tops only add 20mm with the standard shocks, not the coilover tops.
Rupewrecht
27-07-2009, 02:16 PM
330mm front, 300 rear
project.r.racing
27-07-2009, 03:39 PM
wow must look like one of those uber low rear end riced up honda accords/crxs being that low in the rear. :p
Rupewrecht
27-07-2009, 03:53 PM
Hah nah, that's pretty much level. Must be the (apparently) different BA Hardtop guards!
project.r.racing
27-07-2009, 03:55 PM
yeah i didn't think about that. i know the hardtops front guard sit lower and wider than hatchs. guess the rears are even more so like this then.
Rupewrecht
27-07-2009, 04:00 PM
Dunno, i've never compared to be honest :)
project.r.racing
10-08-2009, 09:06 AM
I4 version stock height = f/r 385mm/375mm
stock 185/65R14 596mm rolling diameter tyre
http://i39.photobucket.com/albums/e189/deejayryry/SDC10306.jpg

I4 version D2 coilover slammed = f/r 315mm/305mm
aftermarket 215/35R18 608mm rolling diameter tyre
http://i39.photobucket.com/albums/e189/deejayryry/SDC10307.jpg
marcs_sp20
10-08-2009, 12:41 PM
holy crap, never realised your ba ryan was dumped 70mm! :eek: