PDA

View Full Version : fault codes


trevorm
24-07-2009, 10:06 AM
Hi first time post am a member of Ford forum & members have suggested i check with you guys re accessing fault codes on my2001 KN laser 1.8lt Have jumpered Ten to GND in diagnostic connector but with ign on no light comes up on dash Wondering if this is because the laser has'nt got a dash light ( need to connect led to socket) or if perhaps the pin outs are different between mazda and ford The diagnostic socket looks the same on both cars

would be gratefull for any help

mike_d87
25-07-2009, 09:51 AM
Owners Manuals usually makes reference to engine lights if the car has one.

phildough
25-07-2009, 03:26 PM
There is no light on the dash, you have to hook one up to the diagnostic harness.
I used a buzzer i had handy when i checked mine. Otherwise use the light bulb.

trevorm
26-07-2009, 12:25 PM
Thanks all Phildough do you happen to know which pins in diagnostic to connect the led to

phildough
26-07-2009, 01:41 PM
Ok bridge diagnosis connector terminals TEN and GND, and connect a test lamp or voltmeter to terminals B+ and FEN.
Then turn your igniton to ON. You should get the light come on for 3 sec if all ok.

trevorm
26-07-2009, 02:09 PM
thanks heaps phildough