PDA

View Full Version : rear disk conversion on BG


bg astina
17-01-2011, 11:23 AM
Hey, is it possible to do a rear disk conversion on a BG? if it is what car would I have to get hubs etc off?


Jesse

mkid
17-01-2011, 12:00 PM
well all BG astinas here in australia came with disc brakes on the rear (not sure the sedan did)
but judging by your pic you could have a sp (or engine from a sp or bpt)
so it should have them if it is a sp

but if your looking to get them
find a BG that has them or perhaps a BA (might need some work if you go this route)

bourbon
17-01-2011, 01:02 PM
ba have all different rear arms...best bet is find a BG with the rear disc setup...

bg astina
17-01-2011, 01:19 PM
I have a the astina BG hatch, and it has drum's on the back, that kind of look like cogs

my silver plate thing under model has this on it E-BG5P

Rupewrecht
17-01-2011, 01:30 PM
Ah, you've got a 1500 then.

You need the rear setup from something with a BP DOHC 1800 - so a BG Astina GT, basically. I think the Eunos 100 might have had rear discs too.

bg astina
17-01-2011, 03:11 PM
yea 1500 DOCH 16-Valve 5 speed manual, also sweet I'll ring wreackers and see if they have anything I could cheap

project.r.racing
17-01-2011, 05:13 PM
you'll also need the brake fluid lines and the handbrake cable from the donor car.

BA rear brakes will work.

bourbon
17-01-2011, 05:37 PM
BA rear brakes will work.


arnt the hubs and the arms different???

project.r.racing
17-01-2011, 05:40 PM
dunno whether or not the hub are different. the arms are. but they all bolt up the same as eachother. lots of KF/KH/BGs out there with V6 5 stud conversions from BAs. so 4 stud versions should fit all the same.