bjII protege 1.8 tree hugger

[shaley323]

been lurking for a while now so guess its build thread time.
we bought a 1 owner protege with 100000km and full service history in late july 2009.
we fitted bravo clear side indicators on the delivery day as they didn't fit our ford(original plan)
all went smoothly until 23/12/2009 protege + tree on tight left hand bend with pea gravel = FAIL
http://i1239.photobucket.com/albums/ff502/shaley2810/treehugger20092.jpg
http://i1239.photobucket.com/albums/ff502/shaley2810/treehugger20094.jpg
after a 6 hour walk(no reception) we got help and with their cruiser the corner was pulled out enough to get the subframe off the harmonic balancer.
this allowed us to start the car and drive out on park lights at 1.00am, once we got back to the main road our savior went back home and we slept in the car.
at dawn we drove home to survey the damage
http://i1239.photobucket.com/albums/ff502/shaley2810/treehugger20095.jpg
http://i1239.photobucket.com/albums/ff502/shaley2810/treehugger2009startofrepairs.jpg
the radiator was bent like a banana but didn't leak, condenser and aircon compressor was also killed:eek:

[shaley323]

so next thing was to remove the damaged parts ready for the panel-beater tocome and check it out
http://i1239.photobucket.com/albums/ff502/shaley2810/treehuging2009.jpg
right hand clip was to be replaced(last one in mazda stocks), the radiator support panel, bumper,reinforcing, crush can,bonnet,fender,headlight,radiator,condenser,pow er steering cooling pipe,aircon compressor and both guard liners as the decision had been made to use sp20 bumper.
after almost 12 months of sourcing parts and saving the parts were gathered and the car went off to the panel-beaters.
well doctor do you think you can save this one =)
so the surgery begins
http://i1239.photobucket.com/albums/ff502/shaley2810/photo.jpg
http://i1239.photobucket.com/albums/ff502/shaley2810/009.jpg
nice kink there
after 7 months between other jobs and some disassembly/reassembly from me i get called to the workshop to find my car in this state
http://i1239.photobucket.com/albums/ff502/shaley2810/023.jpg

[shaley323]

trailered the car home to prepare for roadworthy mainly a good clean up and to finally get tyres for the rims that were bought 19/12/2009 but luckily never fitted
http://i1239.photobucket.com/albums/ff502/shaley2810/2003%20mx5/photo17.jpg
stock mx5 16" that got wrapped in 205/50r16 toyo proxes4.
with roadworthy passed and rego paid it was time to chase up the sp20 skirts, rear lip and fog lights.
these were all found and purchased (thank you rupe) the rear lip however was for an astina as no sedan ones around at the time so had to do plastic surgey with a piece of 89 fairlaine bumper.
while washing the car i noticed a puddle under the clutch pedal which turned out to be cracking spot welds so back to the panel-beaters to have these welded up and the skirts, rear lip, tail light housings, headlight garnish+reflectors, stereo surround, shifter/cup holder surround and part of the console in front of the cup holders painted.
http://i1239.photobucket.com/albums/ff502/shaley2810/152.jpg

[shaley323]

then came the time to retrofit the morimoto mini d2s projectors that had alredy been purchased http://www.theretrofitsource.com/product_info.php?products_id=236
the h4 locators on the factory reflector had to be trimmed with a dremel as they are on an angle from factory, the projectors were then fitted, headlight re-assembled without front lens and fitted to the car for rotational alignment, once the cut offs were level the h4 adapter rings were bonded into place using an industrial 2 part adhesive designed for plastics.
http://i1239.photobucket.com/albums/ff502/shaley2810/0eabbb24.jpg
i lightly tinted the indicator lens then the lights then went back into a 70 degree celcius oven for 10 minutes to re seal the front lens.
once done they were re fitted and the wiring finished
http://i1239.photobucket.com/albums/ff502/shaley2810/84a2e446.jpg

[shaley323]

while the bar was off i fitted 3000k hid's to the fog lights and made a new fog light harness to go directly to the ballasts and ran the wiring on the body and re fitted the bumper using sag fix brackets instead of the nut+bolts i had been fighting with
http://i1239.photobucket.com/albums/ff502/shaley2810/8ef588ca.jpghttp://i1239.photobucket.com/albums/ff502/shaley2810/71deb40b.jpg
the tail lights were next for these the chrome rings were routered down as much as practical using jigs made from 38mm chipboard on a cnc machine, the lower lenses were also trimmed down and custom led assemblies fitted, the stop/tail was already led but in the center which was the indicator was fitted with an e-mark reflector the lenses were lightly tinted then the lights were re assembled and fitted to the car, at the same time i fitted led bulbs to the front indicators which required a pin swap on the plugs and load resistors wired in.
the load resistors were fitted in the rear, 2 on each side keeping them out of the engine bay.
http://i1239.photobucket.com/albums/ff502/shaley2810/photo3-1.jpgfrom this to thishttp://i1239.photobucket.com/albums/ff502/shaley2810/150.jpghttp://i1239.photobucket.com/albums/ff502/shaley2810/b64c5f23.jpg
http://i1239.photobucket.com/albums/ff502/shaley2810/156.jpghttp://i1239.photobucket.com/albums/ff502/shaley2810/148.jpg

[shaley323]

some more pictures as it sits now
http://i1239.photobucket.com/albums/ff502/shaley2810/154.jpghttp://i1239.photobucket.com/albums/ff502/shaley2810/147.jpg
http://i1239.photobucket.com/albums/ff502/shaley2810/146.jpghttp://i1239.photobucket.com/albums/ff502/shaley2810/149.jpg

[shaley323]

fitted kn/kq laser wiper stalk then broke the left front inner door handle, got another from the wreckers but it was cracked so i removed the spring from the handle until i get a replacement set.

[Rupewrecht]

Certainly come a long way! :)

[shaley323]

polished the scratches out of my instrument cluster lens and added some rings
http://i1239.photobucket.com/albums/ff502/shaley2810/9674e4ca.jpg
and in the car
http://i1239.photobucket.com/albums/ff502/shaley2810/80926223.jpg

[Ben]

Has came a long way. Looking Mint!

[smurfy]

well done getting it back into such great shape, love the tail lights!

[shaley323]

was handed my "lost" 2nd set of keys yesterday, they ended up in another car for almost 2 years and were found when they finally cleaned out their car.
so now i have 2 original transponder keys to program my flip keys from
http://www.ebay.com.au/itm/150731949289?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649 i have already ordered 2 bt50 key blanks from mazda for the temic 8c transponder chips:)

[Rafferty]

Looking Good! Liking the Sp20 Kit.

[marcs_sp20]

From what it was to what it is now, thats a huge difference, nice work! :)

The MX5 rims remind me of the MP3 wheels found on the Protege in the US, just needs to be a tad lower to pull the look off ;)

[shaley323]

pedders springs and struts are on the to do list

[Clean_Cookie]

buying phils?

[phildough]

I have a set that are beyond cheap, they have 20-25K use.
Please buy them, I would love to get my car back on the road sooner!

[shaley323]

sorry phil but brakes and suspension i always buy new or reconditioned

[phildough]

Ohh well, I was offering a set of springs cheap, they can't exactly wear out.
As I said only have 20 K use and I have only upgraded as I have the MSF engine now.
I will also throw in the set of pedders front shocks for free!
BTW I will wipe the springs clean so they have been 'reconditioned'

[shaley323]

Ohh well, I was offering a set of springs cheap, they can't exactly wear out.
As I said only have 20 K use and I have only upgraded as I have the MSF engine now.
I will also throw in the set of pedders front shocks for free!
BTW I will wipe the springs clean so they have been 'reconditioned'

love your style, you have pm

[shaley323]

pulled my headlights apart today as the tinted indicators were too dark for my liking and after a bit of work i am now happy with the look and performance
http://i1239.photobucket.com/albums/ff502/shaley2810/1c582f34.jpghttp://i1239.photobucket.com/albums/ff502/shaley2810/2bb34376.jpghttp://i1239.photobucket.com/albums/ff502/shaley2810/3c014b51.jpg
sorry about the phone pics.

[xeon8]

Looks awesome! Surely a great way to restore a crashed Protege! Has come a very long way since then, well done mate! :D

[TheMAN]

is that a genuine mazda bonnet deflector guard or did you just put the mazda sticker on? I have a genuine canadian mazda one but it is smoke black instead of clear

[shaley323]

is that a genuine mazda bonnet deflector guard or did you just put the mazda sticker on? I have a genuine canadian mazda one but it is smoke black instead of clear

deflector and head light protectors are genuine items, the vehicle had them dealer fitted when sold new so we replaced them after the repairs.

[TheMAN]

interesting.... so the aussie one is clear? does it overhang onto the wings?

here is mine:
http://web2.airmail.net/theman/hooddefs.jpg
you can barely see the mazda logo at the corner

[shaley323]

no it doesn't overhang at all, if you look on page 1 of this thread you get a slightly better picture of it

[TheMAN]

I see... I'm surprised you were able to get a new one... you can't get the canadian ones anymore for years now
the canadian one has an overhang as you can see in the pic I posted

[shaley323]

damn it's wet up here right now, too wet to pull off the side of the road.
http://i1239.photobucket.com/albums/ff502/shaley2810/099.jpg
http://i1239.photobucket.com/albums/ff502/shaley2810/101.jpg:rolleyes:

[TheMAN]

the car decided it wanted to be a rallyE car! ;)

[shaley323]

had to pull it out with a tractor and chain but luckily my rear lip has the pull away for the towing point, no damage either.

[TheMAN]

your car needs colour keyed mirrors and door mouldings

[shaley323]

the mirrors are staying black as they go with the black door tops and tint, have thought about the side moldings but first will be getting mx5(miata)nb sp rotors with mazda 6 calipers all round and ice.

[shaley323]

installed my bt50 temic 8c chips and remote internals into some mazda 6 style flip keys, just have to get them cut and programmed.

[Zenki]

Is yours similar to this?

http://img807.imageshack.us/img807/5715/screenshot20120331at329.png

I got it from eBay for $15 and installed my chip in there, works well and cheap too :P

[shaley323]

no mine looks like this
http://www.ebay.com.au/itm/150731949289?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

[Zenki]

no mine looks like this
http://www.ebay.com.au/itm/150731949289?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Wow, it looks much nicer! Can you share how you put it all together :P

[Mad Mat]

there is a thread here some where on how to do it as there was like 4 guys who did it at the first dyno day years ago.. phill actually sorced it.. just got to get the key cut and a new transponder or if ur game u can use the one in the key u have already.. but that involves a little surgery...

[shaley323]

install existing remote internals into new housing after trimming/filing the pcb lower corners, i don;t have any pictures as my i phone went for a swim so now i need to locate a replacement 32 gig 3gs logic/motherboard.:eek:

[shaley323]

fitted my supergrid wipers and 1500rs inside door handles. thanks dan.

[shaley323]

programmed my flip keys:D got instructions courtesy of my local mazda service manager.

[marcs_sp20]

Wouldnt have happened to get the instructions for the SP20 keys? ;)

[TheMAN]

I got the sp20 ones
but care to share the 1.8 instructions?

[marcs_sp20]

Care to share the SP20 sequence now edwin?

[marcs_sp20]

I got the sp20 ones
but care to share the 1.8 instructions?

Care to share the SP20 sequence now edwin?

And?

[Ben]

Sharing is caring :p

[phildough]

Please make that post not public as it is a guide on how to steal your car!!!
If anyone wants it ask you. Its the reason why I never posted the guide.

[shaley323]

Please make that post not public as it is a guide on how to steal your car!!!
If anyone wants it ask you. Its the reason why I never posted the guide.

they would need 2 of my keys first and if they get that far they can then steal the car without making copies of my keys.:confused:
post deleted if anyone needs 1.8 or 2.0 litre bj2 transponder programming sequence pm me.

[z100]

Please make that post not public as it is a guide on how to steal your car!!!
If anyone wants it ask you. Its the reason why I never posted the guide.

I'm confused, how is it a guide to stealing your car? They would need your keys, correct? If they have your keys they already have your car. I thought keys had individual codes. Not having a go, just asking!:confused:

I would like to how to do this, keen on changing over my crappy looking old keys to new versions.

[phildough]

After going though this key programming sequence myself and knowing how the immobiliser works on our cars as mine was modified to work with the FS-ZE ECU.
With a little extra work it is possible to reprogram a car with a single key, even with not having an original one.
All you need to know is how to get the car into programming mode which is listed above.
Its not a full guide, but some one with access to two sets of keys can now easily add a third key to the system. (there are a lot of dishonest people out there that would love to know how to add a third key to their car for when they sell it so they can keep one)

[TheMAN]

you can't program the immobiliser with a single key without knowing the immobiliser code

[Ben]

Wouldnt you need to get the key cut first to fit in the barrel to activate the programming sequence??? Keys just dont fit in....Therefore would have to steal your keys to begin with?? Or am i completely off topic :p

Either way if im going to do it, im sure mazda will program it for me. After all i am there best customer after the issues i had ;)

[sim08u]

can u do this mod.. with one set of keys?

[Clean_Cookie]

Wouldnt you need to get the key cut first to fit in the barrel to activate the programming sequence??? Keys just dont fit in....Therefore would have to steal your keys to begin with?? Or am i completely off topic :p

Either way if im going to do it, im sure mazda will program it for me. After all i am there best customer after the issues i had ;)
I was quoted 700 for a key and program from Mazda HAHAHA.

[shaley323]

can u do this mod.. with one set of keys?

yes but the car then needs to go to mazda for programming as they have to get a code to program from 1 key.

[TheMAN]

Wouldnt you need to get the key cut first to fit in the barrel to activate the programming sequence??? Keys just dont fit in....Therefore would have to steal your keys to begin with?? Or am i completely off topic :p

Either way if im going to do it, im sure mazda will program it for me. After all i am there best customer after the issues i had ;)

of course
that involves either a) stealing the keys b) copying the keys c) making a key off the VIN

[TheMAN]

can u do this mod.. with one set of keys?

it's not a mod... it's standard with the car!

as stated, you need 2 keys to programme the immobiliser module

[shaley323]

i think he means the flip-key remote ed.

[crazyxxx]

impossible for us to find them around here is really nice rear lights