PDA

View Full Version : astina bg camber tops


blake5126
23-07-2012, 10:53 AM
Where can I get some bg astina camber tops?

Drift Thorpey
23-07-2012, 11:01 AM
There is a company called DJR that make camber tops but from what I've looked into their stud pattern isn't the same as our AUS Astinas.
Yellowspeed coils come with camber tops, ebay has camber adjustment bolt kits.
I'd suggest some heavy googling or wait for Derb to give you part numbers and codes for every BG bolt and nut EVER, of all time...

Where abouts are you located in SA blake?

blake5126
23-07-2012, 11:06 AM
Tee tree gully its just my old rubber tops are going do familia ones fit? Or laser ones?

derb
23-07-2012, 11:16 AM
Laser, Familia and 323 sedan are the same, but they're all different from ours. You'll have to get tops from an Astina wreck, or buy a set of BC Racing or Yellowspeed coilovers. You could probably get the tops from Mazda, but they would want ridiculous amounts of money for them.

blake5126
23-07-2012, 11:31 AM
So no one at all sells just camber tops

Drift Thorpey
23-07-2012, 11:44 AM
Try searching for BC Racing/Yellowspeed ones otherwise we don't think so mang :s

Cosmo Dude
23-07-2012, 12:13 PM
You can try calling Repco, Bursons, Pedders etc... if it's just stock replacements you're after.

project.r.racing
23-07-2012, 02:20 PM
Rears are available. Fronts you have to buy a universal kit and machine to fit.

Drift Thorpey
23-07-2012, 02:55 PM
Rears are available. Fronts you have to buy a universal kit and machine to fit.

So buy universal camber tops and drill the required stud pattern? Sounds fun and custom and stuff... :D

project.r.racing
23-07-2012, 03:02 PM
http://www.otomoto.com.au/p/4116516/hsd-universal-camber-top-kit.html

buy one of these. take them to a machine shop with the old strut top. tell them, "make the outsides look like the old ones."

Cosmo Dude
23-07-2012, 06:34 PM
http://www.otomoto.com.au/p/4116516/hsd-universal-camber-top-kit.html

buy one of these. take them to a machine shop with the old strut top. tell them, "make the outsides look like the old ones."

FARK Even Mazda parts look well priced in comparison.

project.r.racing
23-07-2012, 06:36 PM
well if you want camber tops, then you gotta pay the big money. if you want just replacement rubber noise isolators, then just buy newbies from mazda.

cheapest option for custom camber tops would be to buy some 2nd hand ones from another car. just make sure the centre bolt/shaft will fit. and get a machine should to make a BG specific plate.

Cosmo Dude
23-07-2012, 06:41 PM
its just my old rubber tops are going do familia ones fit? Or laser ones?

well if you want camber tops, then you gotta pay the big money. if you want just replacement rubber noise isolators, then just buy newbies from mazda.

My guess is just replacement rubber isolators. Most of the other posts look like white noise.

project.r.racing
23-07-2012, 06:44 PM
The OP has mentioned camber tops himself a few times.

Cosmo Dude
23-07-2012, 08:10 PM
Then he/she/it really should express him/her/whatever a whole lot better...

blake5126
04-08-2012, 01:36 PM
thanks guys ill look into it

Sam_323
10-08-2012, 01:45 PM
$300 at Sleeka Spares...
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc7/292289_357650714287483_527776939_n.jpg

project.r.racing
10-08-2012, 01:50 PM
same as linked earlier in the thread.

Sam_323
16-08-2012, 01:20 PM
but sleeka spares are in adelaide for him. :)

blake5126
23-08-2012, 10:53 PM
I had a look at the ones at sleekaspares the diameter is to small compared to aus spec bg