PDA

View Full Version : Can i run 18s and lower it?


Zooker
17-06-2013, 01:34 PM
Hey guys my girlfriend wants to lower her sp20. She wants to get 18s aswell. Ive seen a few picks of the rim just sitting in the guard and thats kinda the look she wants to go for. We don't have enough cash for coil-overs and not to interested in rolling the guard cause i don't want paint problems of it splitting. Anyone know what is actually needed to get this look?

JDM323
17-06-2013, 05:37 PM
Welcome to astina gt, not sure about the 18s but many members have done it so someone should be able to point you in the right direction.

ben carney
17-06-2013, 06:05 PM
I have a set of kyb's about 35-40,000kms on them with king spring super lows, on 16's I was about a finger off the tyre that should acheive it :) inbox if interested

marcs_sp20
17-06-2013, 09:37 PM
Welcome to AGT :)

Anything with a +35 to +40 with a 7-8" width, along with a lowered spring should see the rims sitting on the guards.

Zooker
17-06-2013, 09:50 PM
I was looking at 18x7.5 not sure of offset. If the wheeltrack is narrower will i have less chance of hitting guards and more chance of hitting the chassis side of things. Whats the height difference in lows and super lows.

ben carney
17-06-2013, 10:15 PM
Super lows 50mm drop, lows 30mm but hardly noticeable.
$150 they're yours

BG1.8sp
17-06-2013, 10:22 PM
18x7.5 +52 offset.

Kyb shocks lowered on autoexe springs with 30mm drop

No Rolled guards and no scrub.

slight stretch on tyre. Running 215/35 R18 tyres.

About 5mm between the shock and rim, so just enough. Lol and about 5mm between the guard and tyre... again... just enough.

when I installed coilovers I went lower... there still wasnt any issues

In the pic there is less than a finger gap between top of tyre and guard.

http://i281.photobucket.com/albums/kk231/fairladyZTT_2008/5D4C7C79-A292-4224-A9DD-04E8F26BEB06-4907-000009757269F380_zpse03e61e0.jpg

BG1.8sp
17-06-2013, 10:26 PM
http://i281.photobucket.com/albums/kk231/fairladyZTT_2008/4D1F449D-DC72-436A-A130-11E2541DD205-4907-00000975E7FFB17E_zps31b8885c.jpg

BG1.8sp
17-06-2013, 10:27 PM
Actually.. come to think of it.. above pics are on coilovers... but at that stage I had the rear set to the 30mm drop from stock and the front set to a 45mm drop.