PDA

View Full Version : EOI: SAT 19th JUNE AGT MINI-MEET


pr1mo
07-06-2004, 12:23 PM
Hey there Melbourne people,

SAT 19th JUNE AGT MINI-MEET
SHORTSHIFTER AND RADIATOR CAP COLLECTION POINT!

KING OF KINGS (THE BEST CHINESE RESTRAUNT EVER) MAYBE LATER IN THE ARVO/EARLY EVENING.

RUSSEL STREET CITY.

JUST AN EOI at the moment

Cosmo Dude
07-06-2004, 06:03 PM
Let me think,
AZM cruise 27/5, FL.com cruise 30/5, Mini meet 6/6, Canberra 12-14th of june.


I'm all cruised out *pant, pant, pant* and in the CBD with sfa parking :roll:

mrpayner
07-06-2004, 06:12 PM
Better change that to Saturday June 19th as the 20th is a sunday.. I could come over and stay with Boyd that weekend.. Shouldn't be a problem. Dinner sounds alright.

AP

pr1mo
07-06-2004, 07:36 PM
yeah we could all have a pre meet at boyds and cruise in 1 or 2 cars. save on economy and parking spaces :P

cheers mike

SehnKhan
07-06-2004, 08:00 PM
Meh. If it goes ahead I should be there.

platypus
07-06-2004, 09:38 PM
of course you'll be there!! its your house!!!

mOomOo
15-06-2004, 06:28 PM
Hey dudes, not sure if I could make it for the Saturday to pick up my spunky shifter... Anyone on this cruise live near Essendon?
Hmmmm, anyone interested in sunday cruise to fit the shifter/bushings? :D
Anyone got the tools to do it? :lol:

mrpayner
15-06-2004, 06:34 PM
Oi! MIKE!!! Change the date.. It's Saturday the 19th.. 20th is the Sunday.

Do it
Do it
Do it!

AP

Cosmo Dude
15-06-2004, 06:35 PM
BBQ and spanners on Sunday sounds good, just need enough ground that is flat and dry.

Dogo
15-06-2004, 06:38 PM
to confirm - were the shifters picked up and brought back ? who's got them ?

and whats up with melb ppl's radiator caps ? considering that they only seem to fit the BJ

mOomOo
15-06-2004, 06:38 PM
Oh bloody hell... I'm booked on the sunday to... :oops:
god damnit... was going to say the following weekend... but grrrr, going to tassy... :(
far out... I'm one busy cow!

Sat or Sun in three weeks time fitting cruise? :roll:

Rupewrecht
15-06-2004, 06:40 PM
i've got shortshifters, as you knew i would :P

radiator caps are in limbo until either an exchange or refund is sorted out

and do you realise how hard it is to find parking on russell st on the weekend is mikey?

i'd be up for the sunday install, but prolly think i'm busy on the 19th. would have been nice if you'd asked me mike - unless you intened to pick them up from me :P

pr1mo
15-06-2004, 07:02 PM
and do you realise how hard it is to find parking on russell st on the weekend is mikey??

as stressed in an earlier post i suggested we could all have a pre meet at boyds and cruise in 1 or 2 cars. save on economy and parking spaces

it was basicly an EOI. anyone could come up with anything im not really fussed!

an install day sounds alright tho its gunna be a hellishly wet and crap weekend tho...would want something undercover for sure

Cosmo Dude
15-06-2004, 07:08 PM
...would want something undercover for sure
You have a shed. and it's close to where you live also. :lol: :lol: :lol:
And no! I'm not moving three cars to get into my shed as no.1 car has no motor.

pr1mo
15-06-2004, 07:15 PM
yeh but as uve seen my shed is completly stacked to the rafters full of other peoples ****!

i could do it at my work but hrmmmmmmm boss probarbly wouldnt like it :P

platypus
15-06-2004, 08:40 PM
i have the caps, and your money..... :twisted: muwahahaha!

naaa i'll post it up tomorrow night as to what the F*%$ is going on

Cosmo Dude
18-06-2004, 07:43 PM
Just a quick question.
Is this still a goer or has it died in the a$$? any updated detail?

Rupewrecht
18-06-2004, 08:22 PM
died in the ass i think!

mike?

Cosmo Dude
18-06-2004, 08:40 PM
Ok,
I'm going to change the timing belt on the 9er on Saturday and visit the maternal parent on Sunday (just to check her cruise plans for August so we don't double book) :oops:

mrpayner
18-06-2004, 10:46 PM
Crap.. completely forgot about this.. oh well..

AP

mOomOo
18-06-2004, 10:46 PM
Well if this has died in the ass how about we start to organise a half decent fitting day/afternoon? July 3 or 4th would give us 2 weeks to find a good location?

Anyone have any suggestions?

Mike

pr1mo
19-06-2004, 09:46 AM
ye completley dead this one is. ummmm i dunno from what i could tell everyone was flatout this weekend so how bout mikes suggestion of jumy 3rd or 4th???

any other ideas?

cheers mike

Rupewrecht
19-06-2004, 02:20 PM
4th is out for me as there's an azm cruise on, but 3rd should be ok

Cosmo Dude
19-06-2004, 06:39 PM
4th is out for me as there's an azm cruise on, but 3rd should be ok
What would it matter if 3 people turned up instead of 4?

pr1mo
19-06-2004, 08:48 PM
been there...done that rod :P

mOomOo
23-06-2004, 06:05 PM
How about if we were to hook it up with the azm cruise. Those that want to pick up only could head off on the cruise.
Others could help each other to install instead of cruise, or perhaps even meet earlier to install before cruise...

Or is this idea just plain silly? :roll:

SehnKhan
23-06-2004, 06:09 PM
Anyone's welcome to come on TeamAZM cruises, hope you do come along mate.

As for the mini-meet for AGT, maybe end of July?

Rupewrecht
23-06-2004, 06:11 PM
you're welcome to :)

i actually dropped of Dogo's and Pr1mos last night as was close by...well, to dave, anyway ;)

i wourk in the city, so if u works somewhere in the vicinity i could drop it off on my way home

still havent installed mine anyway, am in no rush :)

pr1mo
23-06-2004, 10:11 PM
ive bolted one of my many gearknobs onto mine :) looks schmick!

mOomOo
24-06-2004, 07:09 AM
So how many people are there still to collect there's?

Perhaps the idea of a meet to distribute/fit is irrelivant if there is only 1 or 2 ppl left... :cry:

And therefore would just be easier to collect from whoever has the remaining stock...

Rupewrecht
24-06-2004, 12:21 PM
just you! :)

thats why i asked what area you worked in. i can drop off if near the city, or u can pickup from me if u want

mOomOo
24-06-2004, 06:00 PM
Haha... and here i was thinking there was probably like 3 people to collect or something... :)

Well I work out of Port Melbourne, but I'm a consultant, so I travel around... And I live in Essendon...

Where abouts do you live? perhaps I could collect from you on Sunday or something? (heading down to Tassy tomoz till sunday morning). So if you were to private message ur number to me I could give you a call on Sunday if you think you'll be free.

Michael

Rupewrecht
25-06-2004, 12:43 PM
will do :)

kyra
25-06-2004, 02:06 PM
Michael, I work in Port Melbourne too... in the Holden complex... neighbours!

mOomOo
27-06-2004, 08:38 AM
Well there you go, I work just down from the holden complex on Salmon street :) right near the corner of Williamstown road!

Cosmo Dude
27-06-2004, 09:30 AM
Well there you go, I work just down from the holden complex on Salmon street :) right near the corner of Williamstown road!
I think we have found someone to organise a go-kart night ;)

mOomOo
27-06-2004, 09:41 AM
Hehehe... yeah it's only a few doors down :roll:

kyra
28-06-2004, 08:35 PM
haha, I'm on corner of lorimer and salmon st... so auscarts pretty much splits Michael's workplace and mine... too easy.

SehnKhan
28-06-2004, 08:44 PM
See go kart thread here: http://www.astinagt.com/forum/viewtopic.php?t=2739

pr1mo
28-06-2004, 10:01 PM
we should install 4 in the one go..get a production line happening :)

mOomOo
28-06-2004, 10:03 PM
How many people got short shifters in Melb? and how many of those people haven't installed them yet? :) I'd be all for the production line... but dunno how many people are left?

pr1mo
29-06-2004, 02:27 PM
nobody has theirs in yet from what i know!

Dogo
29-06-2004, 03:11 PM
i have a large pile of things still waiting to go into my car :(
including the short shifter.

Rupewrecht
29-06-2004, 03:34 PM
ditto*sigh*

pr1mo
29-06-2004, 03:49 PM
and again :(

mOomOo
29-06-2004, 06:36 PM
So... Who would be interested in getting together this Sunday two do a group install? I'm not sure on location... Perhaps in Port Melbourne before the AZM cruise? I know I know, it would be pretty early... or... if people aren't going on the cruise could meet with them and then go install then after meeting somewhere... Any suggestions???

Cosmo Dude
29-06-2004, 06:48 PM
And a stop off at the South Melbourne market for some of the famous dim sims, I could be tempted even though I don't have a shifter to install.

SehnKhan
29-06-2004, 07:07 PM
So... Who would be interested in getting together this Sunday two do a group install? I'm not sure on location... Perhaps in Port Melbourne before the AZM cruise? I know I know, it would be pretty early... or... if people aren't going on the cruise could meet with them and then go install then after meeting somewhere... Any suggestions???

This Sunday is the TeamAZM cruise man, come along to that :)

mOomOo
29-06-2004, 08:07 PM
Yup, as stated in my message, perhaps we could meet at the start of the AZM cruise... :lol:

mOomOo
29-06-2004, 08:10 PM
wonder if I'm the only one that is going to say... mmmmmmm, dim sims... in the usual homer fasion hehe, yes, they do sound appealing!


And a stop off at the South Melbourne market for some of the famous dim sims, I could be tempted even though I don't have a shifter to install.

pr1mo
29-06-2004, 10:06 PM
yeah id be keen todo that... meet somewhere central and go from there for those who arent cruising :)

Rupewrecht
30-06-2004, 12:29 PM
the city isnt central?!?!


but i'm out sunday morning - got too much to organise with the cruise

pr1mo
30-06-2004, 02:33 PM
well whats everyone upto on the saturday???sould organise something for then perhaps??

dan? dave? mike? rod :P ?

cheers mike

mOomOo
30-06-2004, 04:52 PM
I'm working the Sat :(

Bugger me... I've been sooo busy recently :(

pr1mo
30-06-2004, 06:25 PM
dan. ill be goign to ace exausts in croydon before 12 on sat. what r u upto? apparently dave is able to get out that way quite quick too :P

cheers mike

Rupewrecht
01-07-2004, 11:22 AM
nah this whole weekend i'm flat out unfortunately :(

and have to take my sis to the airport next sat...but what about next sunday? i don't think i'm doing anything yet

mOomOo
01-07-2004, 06:09 PM
Vote one for not the weekend of the 10th/11th Going away for the whole weekend... :oops:

mOomOo
01-07-2004, 06:10 PM
Perhaps a week night if someone has a nicely lit area with cover?

Cosmo Dude
01-07-2004, 08:34 PM
Perhaps a week night if someone has a nicely lit area with cover?

Night, Brrrrrrr!!
I've just come from my mechanics after farting 'round with the timing belts and it's cold out there. Even in a well lit workshop.

pr1mo
01-07-2004, 10:30 PM
could do it in my factory after dark if anyones keen. down near frankston :) tomorrow night (friday) would be cool!

cheers mike

mOomOo
02-07-2004, 07:22 AM
Bit of a drive... But if everyone else was keen I'd give it a go :)

could do it in my factory after dark if anyones keen. down near frankston :) tomorrow night (friday) would be cool!

cheers mike

Rupewrecht
02-07-2004, 12:50 PM
nope, i'm out for that one too :/ but if someone wants to grab it off me then you two can go for it :)

pr1mo
02-07-2004, 01:03 PM
hehe our mechanic Mr Roddles would havta come down n help!! just cuz i have no clues! unless mike knows whats going on :)

cheers mike

Cosmo Dude
02-07-2004, 05:41 PM
Not tonight, too late notice.

pr1mo
02-07-2004, 05:42 PM
no dramas rod. let me know when your keen and we might be able to have a mini get together :) always good to catch up :)

cheers mike

mOomOo
02-07-2004, 06:06 PM
Seems like Mikes have as much clue as each other!

me <---- not alot of clue with this sort of thing... :P


Well let us know if your going to be doing this one night... Perhaps next week sometime? and if it's not Thursday or Friday then I'd be in!

pr1mo
02-07-2004, 08:03 PM
hmm ok so hows down south on a monday tuesday or wednesday sit with everyone else?!?!

whats everyones preferred day?

cheers mike

mOomOo
06-07-2004, 07:26 AM
So I'm guessing others aren't/weren't to interested for during the week...