Front indicators - Getting the lenses off

[mrpayner]

[color=#000000:post_uid0]Hey guys & girls

Has anyone tried to get the lenses off the indicator housing in the front bar??

The little clips [maybe even the whole lens] seems to be glued onto the casing....

I basically need to know if it's solid behind there, or if there is room between the lens and the little box that the indicator light sits in. I have taken the whole piece out of the bar, and had a look through the hole where the indicator goes, but I can't see past the little box thing....

Help will be appreciated

Adam[/color:post_uid0]

[IceWish]

[color=#336633:post_uid0]Well i never had any experience wid my indicator ...but i know what youre talking about with that clip thingee.....theres one exactly like it on the fog lights...i had to change a bulb and i wanted to take it apart cause water got in....The whole thing is glued together....really tight..theres no way it could open withought breaking it....well the fog lights at least...dont know about the indicatort though ...dont know if ive been any help at all either...[/color:post_uid0]

[Rupewrecht]

[color=#000000:post_uid0]i think if you heat the up, the 'glue' that holds the indicator lens to the indicator body become gooey, and you can then get indicator off.[/color:post_uid0]

[kiri_g]

Go to the website http://www.mx5club.org.nz/maintenance/driving_lights/ It
tells you everything you need to know to remove the front without braking it!

[bourbon]

ive done it sucsefully on my bg...but i used boiling water...only issue was when i put the lens back on, after about 3months the lens started to crack...im not sure what the effects are like doin it this way are like...so yeah...if ya can let us know how they last for a while :D