Cam me up scotty

[Cosmo Dude]

[color=#810541:post_uid5]Can anyone point me in the right direction for a new pair of bump-sticks (cams) for the 1.8, BP, 4 Cyl engine? :D :D
Don't get me wrong I enjoy a good turbo but with the racing a 1840cc turbo magicly becomes 3128cc engine and I jump two classes (really nasty with the Cosmo, the 1308cc 13B is now 4002cc) :angry: :angry: :angry:
As you can see the old fashion cams, exhaust and intake are my first point of call. Exhaust and intake are easy but good cams for a non Aussie V8 are not easy to come by.

Rod[/color:post_uid5]

[Rupewrecht]

[color=#000000:post_uid0]Can't say i know of any off the shelf...But wouldn't MX5 ones fit? There'd have to be a few US and/or Jap made ones floating around

Otherwise, i was going to get some custom-ground which was goign to be about $1500. but that was turbo application - not sure if they were going to be any different

cheers
Dan[/color:post_uid0]

[Rupewrecht]

[color=#000000:post_uid0]did a quick search:

Standard Mazda BP cam specs (http://members.aol.com/solomiata/cams.html)

Reading that, GTX cams might be the way to go for a reasonably cheap off-the-shelf item

or HKS ones are $1012 each :O[/color:post_uid0]

[BigMal]

[color=#000000:post_uid1]Do a search for TX3 Central an aus site and look under the mods section. In there he gets some cams made up. See
if it says who made them on the specs sheet which shows
lift and duration etc. Also look at solomiata.com and see
what he recomends. Its a great site especially the 4cyl
interchange guide.

Regards

Mal[/color:post_uid1]