PDA

View Full Version : Big brake discs "what to do"


ZiD
21-02-2003, 07:27 PM
[color=#0000FF:post_uid0]To legaly convert my 323f into a turbo machine i need to upgrade my brakes.
sadly my car come with brake drums back and small discs in front.

where can i get a upgrade kit.

and to get discs back what do i have to do?
i can take the "wheel" part from the v6 version, but wil this fit?

and this will be expensive.. :([/color:post_uid0]

BigMal
21-02-2003, 09:12 PM
[color=#000000:post_uid1]Not sure if you just need to buy the calliper and rotor for
the front to upgrade. The calliper should be stamped 22V.
Get the 1.8 not the V6 as the latter is 5 stud. The rears
you would need to change the whole king pin assembly
where it bolts to the strut. Never seen the drum setup
on the 323's so not positive what needs to be swapped.
Wouldn't you be taking your mates GTR brakes and take
his wheels as well ?? (Cause they are 5 stud too)

Regards

Mal[/color:post_uid1]