PDA

View Full Version : Need to borrow stock springs - For rego


BigBoyLemonade
09-02-2003, 06:40 AM
[color=#006666:post_uid0]I need to borrow someone's stock springs for rego... anyone?[/color:post_uid0]

Toyboy
09-02-2003, 07:04 AM
[color=#000000:post_uid0]Sik Mik would be the man to ask for that,your going to the Gong for the cruise tomorra arnt ya Tony?If Mic has his stock springs you are set :;):

Catch ya :)[/color:post_uid0]

sik astina
09-02-2003, 08:33 AM
[color=#0000FF:post_uid2]Hey tony. you can borrow mine no problems :p


-Mick :cool:[/color:post_uid2]

Provo
11-02-2003, 05:10 PM
[color=#000000:post_uid0]Um...what is a legal lowering hieght in that case? Cause I need new tyres for rego....so i'm getting the alloys and the springs done at the same time...and then getting checked...[/color:post_uid0]

sik astina
11-02-2003, 07:08 PM
[color=#0000FF:post_uid0]Hey Provo, legal height is 100mm off the ground thats in NSW anyways, not sure if its the same in other states


-Mick[/color:post_uid0]

MrShadow
12-02-2003, 03:10 AM
[color=#000000:post_uid0]In other words, they should be able to get something like a coke can say (or anything 100mm in diameter) and roll it anywhere under your car and if it gets stuck, or hits anything, you're gone.[/color:post_uid0]