PDA

View Full Version : 1 / 4 Mile Times


Snert
05-03-2006, 12:52 PM
Hi Guys

Due to the incompatability of the 1/4 Mile Database to the forum (And until Enigma@OMC has it sorted) & the interest in everyones Drag Times.

I am going to be tracking 1/4 Mile Times, I have started QLD and now plan to expand to anyone that has 1/4 Mile times

Where I am at so far can be seen at http://snertspeed.pcroom.com/results.htm

It is a great help that you can enter your own times and just email them to me for a cut and paste.
Blank Sheets can be retrived from http://snertspeed.pcroom.com/blank.xls
Once completed just email them over to me snertspeed@pcroom.com
Also include your engine/car (eg. SP20, SP18, BP18T, KE16T, etc) and your detail (state,usernick,forum)
Also can you send over a scanned copy of your fastest time slip (so there no questions about who did what)
Also any suggestions, comments or complaints (minimum on these please)

Thanks

Kurt
(Snert)

Nate
06-03-2006, 11:15 AM
will add mine after the 18th

ran a 17 flat with just the cat back exhaust ... will be interested to see what it does now it has microtech and extractors

Mazda6ex
06-03-2006, 08:16 PM
2003 (Feb) 323 Protegé 2.0L (SP20) - 89.1 KW ATW - 1/4 - 15.939
2005 (May) Mazda 3 2.3L (SP23) - 180.7 KW ATW (So Far) - 1/4 - Yet to Run
So who's got a 181kW atw 3... thats some scary ****

the michelinman
06-03-2006, 10:09 PM
my mx6 pull a 14.9

http://img212.imageshack.us/img212/1558/148vj.jpg

Nate
06-03-2006, 10:13 PM
So who's got a 181kW atw 3... thats some scary ****

must have been a typo :p :rolleyes: :o

skippy
07-03-2006, 09:01 AM
no v6 times :(

the michelinman
07-03-2006, 12:23 PM
no v6 times :(


mines a V6 KL03 :rolleyes:

geetee
08-03-2006, 04:59 AM
might interest some of you....
http://popuplights.co.uk/community/index.php?topic=1178.0
mostly BG GT`s (SP) but there`s a few BA`s including a V6. :)

Nate
08-03-2006, 12:12 PM
thats need updating :p rob has done a 13 flat since then :p

skippy
08-03-2006, 12:37 PM
15.874 time to beat for the V6


anyone heard better?
He's looking at you Pete,

CRA23
08-03-2006, 01:43 PM
i think pete did a 15.7 or 15.8 but that was with a KF-ZE and heavy duty clutch, with a stock aus spec it would be very hard to go below 16.0ces and if you have an auto be expecting times between 17.5 and 18sec prolly closer to 18sec

chicaboo
08-03-2006, 03:02 PM
I thought Pete's time was 15.9XX? Anyhow, my old gay auto would GTech at 17.8XX, and the Gtech on the lame manual would come up at 16.9 with 2 ppl onboard.

geetee
08-03-2006, 04:49 PM
thats need updating :p rob has done a 13 flat since then :p

:) yeh, i know.... but he ain`t told us about it yet. ;)

i`m hoping to get mine down a bit on the 9th of april.....

Nate
08-03-2006, 09:27 PM
yep ... im running again on the 18th ... i will update then

Ian
09-03-2006, 12:59 AM
ill see what I run next time. Im not happy with a 15 flat as my best time.

geetee
09-03-2006, 03:53 AM
oh, and by the way the BG N/A will happily rev all the way to 7500rpm.... ;)

bourbon
14-03-2006, 10:39 PM
oh, and by the way the BG N/A will happily rev all the way to 7500rpm.... ;)

note mine.....auto + stock ecu... says FUEL CUT OFF AT 6500rpm :( aha ohhh well... 18.02 atm...hopin to get high 17s this weekend...

Nate
14-03-2006, 10:48 PM
oh, and by the way the BG N/A will happily rev all the way to 7500rpm.... ;)

so when i tapped 8000 thru first second and third the other night wasnt really doing my engine any favours?? :p

geetee
16-03-2006, 09:34 AM
so when i tapped 8000 thru first second and third the other night wasnt really doing my engine any favours?? :p

whether the engine will be happy BEYOND 7500 i don`t know. mine bounces off the rev limiter......

i know i wouldn`t be happy with a windscreen covered in oil though!!! :p ;)

what i mean`t to imply was that its not necessary to change up into 4th gear before you cross the line, just give it some RED.... :)

geetee
16-03-2006, 09:37 AM
ah, just noticed in the above post that you have a microtech.......

no gay limits for you then.... :p

Nate
16-03-2006, 12:26 PM
gay limits = no blown engine :p

Rupewrecht
16-03-2006, 03:24 PM
Mine didn't blow at 8000 :p

and it pulled HARDDDDD all the way there and would have kept going for a few thousand more...but then Mr Rod would have punched a hole in Mr Block methinks

I should scan my crappy timeslips sometime

Nate
16-03-2006, 03:30 PM
*cough* b6t rods *cough*

twilightprotege
16-03-2006, 07:45 PM
nate needs cams!

Nate
16-03-2006, 09:26 PM
nate will be getting cams as soon as i have cash ... actually ... nate is 'handling' a few other situations at the moment

geetee
10-04-2006, 05:32 AM
new PB.......

16.31secs @89.1mph. Crail raceway, Scotland, 9th April 06.
short video taken from a 2 litre ford mondeo.....
http://media.putfile.com/GeeTeeWon

Ripper323
25-06-2006, 07:28 PM
My PB, 15.8769@ 86.36mph, Heathcote raceway, 24 June 06 (I think I've told everyone now!)

FLiP
13-07-2006, 09:24 PM
I ran a stunner of a time in my stock BA 1.8 last night at WSID...

16.789 @ 132.58 (82.38mph) :eek:

well it stunned me anyways

air temp was 10 degrees and humidity was 96%... it was perfect

can't wait to see what the exhaust and intake do :)

MAztinA 323
13-07-2006, 10:02 PM
wow nice one!

how come that times so close to geetees, but his car is worked so much more?

btw, nice vid geetee, would u loose any more time if u took ur cap off? or does it help u think about the gear changes better? hehe~

FLiP
13-07-2006, 10:13 PM
i dunno... i've been looking on the net and it's right up there with the V6 BAs... maybe it was the driver :p

bourbon
13-07-2006, 10:19 PM
i dunno... i've been looking on the net and it's right up there with the V6 BAs... maybe it was the driver :p

from memory the BAs are 160kg heavier (correct me if im wrong)...so in hindside...the BGs have better power to weight... ohh and also cause GeeTee is in UK he doesnt have a CAT to slow down the airflow in the exhaust...

FLiP
13-07-2006, 10:34 PM
correct me if im wrong... but the bg stock 1.8 doesn't have the power of the ba 1.8... so much more power in fact that the 160kg is more than taken car of... and why would you want the exhaust to slow down?

FLiP
13-07-2006, 10:51 PM
ok... i sorted it out :)

the bg 1.8 astina had 78kW stock... unless you got the sp which had 92kW stock.

and he's in scotland so it may have varied over their... performance wise he only has exhaust and intake... so he probably has the sp equivalent and his conditions weren't as good... (mine was 10degrees air temp and 96% humidity)

and i had taken out my spare and all my stereo crap... so they're all variables you would have to consider

geetee
14-07-2006, 08:03 AM
I have the GT, the same as your SP, but in the UK models before 1992 (mine) had 104 kw (140bhp) and 1992 onwards had a cat and therefore only had 92kw (129bhp).....

And bourbon was refering to exhausts affecting performance coz of the cat, not slowing the car down. ;)

And i don't think the BA has more power than the BG.
The Cat BG's had 129bhp, whereas i believe the BA's had 118bhp...... in the UK anyway.

boostedbatman
14-07-2006, 02:41 PM
i dunno... i've been looking on the net and it's right up there with the V6 BAs... maybe it was the driver :p
Jap v6s have 170hp and When I ran mine with 3 broken engine mounts and well and truely worn stock suspension and Aus ECU (meaning the VRIS were positioned in the wrong place in the rev range and I couldn't use the top 1000rpm) I still got a 15.8 with 2.2 60'. A properly tuned JDM v6 with correct ECU and halthy car should hold up a low to mid 15 unmodified
Chuck in a KL-ZE and youre looking at 14s :p

Snert
30-09-2006, 11:12 PM
BUMP

Hi Guys

Just bumping an old thread

I have been tracking 1/4 Mile Times for QLD for a while and a few others but no one has been sending in times of late.

Where I am at so far can be seen at http://snertspeed.pcroom.com/results.htm

It is a great help that you can enter your own times and just email them to me for a cut and paste.
Blank Sheets can be retrived from http://snertspeed.pcroom.com/blank.xls
Once completed just email them over to me snertspeed@gmail.com
Also include your engine/car (eg. SP20, SP18, BP18T, KE16T, etc) and your detail (state,usernick,forum)
Also can you send over a scanned copy of your fastest time slip (so there no questions about who did what)
Also any suggestions, comments or complaints (minimum on these please)

Thanks

Kurt
(Snertspeed)

geetee
23-04-2007, 05:04 AM
BJ time....
Previous time was a 17.25, set in October 06.
April 07 - 16.86, with K&N panel filter, cold air feed and Exhaust back box.
Also lowered with 18" wheels....
I'll stick my timeslip up here soon, but if you want to see it now, go to....
www.crailraceway.co.uk
Go to "times" for 15th April and type Neil Farmer into the name box. ;)

Murray
02-10-2007, 07:29 AM
17.758 in a 1.5 BA, hoping to knock it down to around 17.5 at crail again in a couple of weeks :)

DVS
02-10-2007, 11:37 PM
what would a stock sp20 roughly run?

newman
03-10-2007, 02:05 PM
high 16's at best

bourbon
03-10-2007, 02:07 PM
find out off of marcsp20....he took his down the 1/4...

Murray
30-10-2007, 09:01 AM
well, the F ran a 17.678 at crail on the 14th was hoping for better, prolly need some better tyres and smaller wheels to shave off a bit more time or just a new engine :p

another guy that goes up with us managed a 17.492 in his 1.5 F gutted he beat me :(

89sp1.8
29-11-2007, 12:08 PM
ran 14.8 bout month ago

marcs_sp20
29-11-2007, 04:52 PM
what would a stock sp20 roughly run?

DVS,

To answer your question, I ran my SP20, I did a 16.8 @ 82mph, with a ****ty 60ft time (first time out). The car was basically stock, only had a cat-back zorst and K&N filter to pull that time...

Marc

DVS
29-11-2007, 05:19 PM
what have you run since with what mods?

marcs_sp20
30-11-2007, 10:53 PM
what have you run since with what mods?

I havent had the time to head out... The last run I did was back on good friday of 2006...

I would say if I were to install a better clutch, engine mounts and maybe CAI, i reckon a mid to low 16 could be possible...

Now if i were to do a bit of weight reduction, that number could easily fall into the mid to high 15's...

Marc

DavoAust
30-11-2007, 10:59 PM
we should have a brissie drag day, take the astina's to the strip. i'd like to see if the astina is as slow off the line as i think...

SIlversp20
30-11-2007, 11:15 PM
hell yea davo that be awsome il be in for that. should be interesting to see all the astinas times,
would be an awsome photo opp with all the members cars at the stagein area :D

bourbon
01-12-2007, 08:22 AM
ive been continuously suggestin this...but not 1 person ever wants to do it...i wanna do it in the new year when i fix 2 things and see if that gets me into the high 15s...

SIlversp20
01-12-2007, 10:09 PM
new year sounds good mate can we get any others to come along ?? would be a fun day/night

LordWorm
02-12-2007, 02:42 AM
i'm up for a brissy drag day now that i've got my license back...my last time out i ran on the low side of 15.2, nudging 90mph....with 3 shagged mounts and a tune not quite sorted for the new cams....if i can get the thing to hook up i should be good for a 15 flat now i reckon ;)

LordWorm
02-12-2007, 02:45 AM
I havent had the time to head out... The last run I did was back on good friday of 2006...

I would say if I were to install a better clutch, engine mounts and maybe CAI, i reckon a mid to low 16 could be possible...

Now if i were to do a bit of weight reduction, that number could easily fall into the mid to high 15's...

Marc

Weight reduction on another otherwise stock SP20 should yield low mid to low 16's...the front engine mount upgraded to an AWR should consistantly see you in the low 16s...
i'm pushing low 15's now with the stock clutch, stock tires, stock intake system stock exhaust (!), cams and microtech....not sure how much longer the clutch will survive though - mind you, people have been telling me everytime i head out that it will go "this time" and it still seems happy.....

Ripper323
02-12-2007, 07:53 AM
Weight reduction on another otherwise stock SP20 should yield low mid to low 16's...the front engine mount upgraded to an AWR should consistantly see you in the low 16s...
i'm pushing low 15's now with the stock clutch, stock tires, stock intake system stock exhaust (!), cams and microtech....not sure how much longer the clutch will survive though - mind you, people have been telling me everytime i head out that it will go "this time" and it still seems happy.....

You'd reckon (moderate) weight reduction on an SP20 would yield quicker than low 16's, considering that was basically all I did on my BJ11 1.8L and ran a 15.8!
Maybe I just have a freaky car!!

LordWorm
02-12-2007, 02:01 PM
You'd reckon (moderate) weight reduction on an SP20 would yield quicker than low 16's, considering that was basically all I did on my BJ11 1.8L and ran a 15.8!
Maybe I just have a freaky car!!

you went to the extreme though...

without removing body kit, exhaust system and so forth ... just hte rear seats and rear trim, and hte rear wing to cut some drag....
sure if you strip more out it'll go faster again....

Ripper323
02-12-2007, 03:37 PM
you went to the extreme though...

without removing body kit, exhaust system and so forth ... just hte rear seats and rear trim, and hte rear wing to cut some drag....
sure if you strip more out it'll go faster again....

I took out the back seats, the spare wheel, the front seat, the wing and the exhaust, wasn't too extreme!!

Murray
01-05-2008, 06:09 AM
went up to crail again on sunday and managed a 17.360 @ 77.2mph

alright for a wee 90hp 1.5 :D

just want to break 16's and im finished with it

mcwilly
01-05-2008, 10:22 AM
i ran a 13.458@107.21mph with a 2.217 60ft on semi's

timeslip link:
http://www.fordlaser.com/garage.php?mode=view_gallery_item&image_id=3378

Putonyourshoes
01-05-2008, 12:16 PM
very nice mate!

70NYD
21-06-2008, 02:09 PM
so is anyone up for a brissy drag? i noticed davo n bourbon n lord worm suggest this but it was AGES ago. so has it happend yet or should we go 4 one some times next month? :) i wanna c what myn can do :D

twilightprotege
21-06-2008, 10:58 PM
i'm sure there will be a few ppl going out to a tnt just prior to jamboree (august 23-24), so keep an eye out

zero_cool
24-06-2008, 01:04 PM
I went out to the WSID last week,

I cracked a 16.73 @ 82.xxMPH
not bad for a bog stock 323 with 247x kms on it... I was rather impressed with it

http://i5.photobucket.com/albums/y187/noomz/astina/th_180608555.jpg (http://i5.photobucket.com/albums/y187/noomz/astina/180608555.jpg)

FLiP
25-06-2008, 07:33 AM
Crikey... that's pretty quick.

I ran 16.789 in a 1.8 BA with K&N panel filter.

I think you went at the right time of year... nice and cold... what was it out there like 6 degrees?

I was thinking I wouldn't be able to do better than that. But you've just given me reason to go back and beat your time. :)

bourbon
25-06-2008, 02:25 PM
the BAs were heavier than the BGs as well...so dont expect much better...

im expecting mid 15s out of mine...i dont want to take it out to the drags now since i blew up 2 boxs in 6months :(

twilightprotege
25-06-2008, 03:22 PM
im expecting mid 15s out of mine...i dont want to take it out to the drags now since i blew up 2 boxs in 6months :(

a mid 15 second car blowing gearboxes???

bourbon
25-06-2008, 03:25 PM
going to 8,000rpm doesnt help :p

89sp1.8
25-06-2008, 03:44 PM
i like blowing boxes,and its so much fun wen u get em out and getting ur hands all oiled up..:p

'thats wat she said ;) '

oh wait..u guys are talking about gearboxes.?:p

newman
25-06-2008, 08:00 PM
going to 8,000rpm doesnt help :p

going to 8000rpm doesn't kill boxs, its hard launches, hard acceleration when on full lock or when coming on boost (which is not possible for you)

bourbon
25-06-2008, 08:09 PM
i dont do hard launches, nor do i do hard acceleration on full lock...so the only thing i can bring it down to is the 8,000rpms...

newman
25-06-2008, 08:49 PM
bizare, what exactly is blowing? cause i've just been assuming its the diff, but is it the gearset? or something shaft related?

tacety
26-06-2008, 10:00 AM
has anyone ran a sohc bg???
just wondering what kind of times i would be expecting??

bourbon
26-06-2008, 11:09 AM
first box my bearing seazed and smashed the gears and syncros...
second box, havnt pulled it apart yet, but i couldnt go forward yet i could reverse...

marcs_sp20
26-06-2008, 11:29 AM
has anyone ran a sohc bg???
just wondering what kind of times i would be expecting??

Mad Mat on here ran a 17.523 with a SOCH BG, with exhaust and intake done...

Putonyourshoes
22-08-2008, 02:06 PM
does anyone know what stock v6's run?

Madd_Maxx
13-01-2009, 09:21 PM
Cant wait to run mine down the strip.

Hammo
13-07-2014, 07:57 PM
Ahh this thread is now a zombie!!

Best reaction time of the day with an average 1/4 mile time and my best time of the day with a poor reaction time and all with a buggered clutch.

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xfp1/t1.0-9/10421443_10152565276747430_2854697277181062550_n.j pg