PDA

View Full Version : What Haynes Auto Repair manuals really mean...


Rupewrecht
17-06-2003, 04:01 PM
Obviously the Astina manual isnt the only evil one...

--

Haynes: Rotate anticlockwise.
Translation: Clamp with vice grips then beat repeatedly with hammer
anticlockwise.

Haynes: This is a snug fit.
Translation: You will skin your knuckles!

Haynes: This is a tight fit.
Translation: Not a hope in hell matey!

Haynes: As described in Chapter 7...
Translation: That'll teach you not to read through before you start, now you are looking at scary photos of the inside of a gearbox.

Haynes: Pry...
Translation: Hammer a screwdriver into...

Haynes: Undo...
Translation: Go buy a tin of WD40 (catering size).

Haynes: Retain tiny spring...
Translation: "Jeez what was that, it nearly had my eye out"!

Haynes: Press and rotate to remove bulb...
Translation: OK - that's the glass bit off, now fetch some good pliers to dig out the bayonet part.

Haynes: Lightly...
Translation: Start off lightly and build up till the veins on your forehead are throbbing them re-check the manual because this cannot be 'lightly' what you are doing now.

Haynes: Weekly checks...
Translation: If it isn't broken don't fix it!

Haynes: Routine maintenance...
Translation: If it isn't broken... it's about to be!

Haynes: One spanner rating.
Translation: Your Mum could do this... so how did you manage to botch it up?

Haynes: Two spanner rating.
Translation: Now you may think that you can do this because two is a low, tiny, 'ikkle number... but you also thought the wiring diagram was a map of the Tokyo underground (in fact that would have been more use to you).

Haynes: Three spanner rating.
Translation: But Nova's are easy to maintain right... right? So you think three Nova spanners has got to be like a 'regular car' two spanner job.

Haynes: Four spanner rating.
Translation: You are seriously considering this aren't you, you plebe!


Haynes: Five spanner rating.
Translation: OK - but don't expect us to ride in it afterwards!!!

Haynes: If not, you can fabricate your own special tool like this...
Translation: Hahahahahahahahahahahahahahahahahahahahahahaha!!!!

Haynes: Compress...
Translation: Squeeze with all your might, jump up and down on, swear at, throw at the garage wall, then search in the dark corner of the garage for, whilst muttering, "bugger" repeatedly

Haynes: Inspect...
Translation: Squint at really hard and pretend you know what you are looking at, then declare in a loud knowing voice to the wife, "Yep, as I thought, it's going to need a new one"!

Haynes: Carefully...
Translation: You are about to cut yourself!

Haynes: Retaining nut...
Translation: Yes, that's it, that big spherical blob of rust.

Haynes: Get an assistant...
Translation: Prepare to humiliate yourself in front of someone you know.

Haynes: Turning the engine will be easier with the spark pugs removed.
Translation: However, starting the engine afterwards will be much harder. Once that sinking pit of your stomach feeling has subsided, you can start to feel deeply ashamed as you gingerly refit the plugs.

Haynes: Refitting is the reverse sequence to removal.
Translation: But you swear in different places.

Haynes: Prise away plastic locating pegs...
Translation: Snap off...

Haynes: Using a suitable drift...
Translation: The biggest nail in your tool box isn't a suitable
drift!

Haynes: Everyday toolkit
Translation: Ensure you have an RAC Card & Mobile Phone

Haynes: Apply moderate heat
Translation: Placing your mouth near it and huffing isn't moderate heat.

Haynes: Index
Translation: List of all the things in the book, bar the thing you want to do!

For Added Haynes Fun: Go to the first section, Safety First, and read the bit about Hydrofluoric Acid - do you really want the advice of a book
that uses this form of understatement???!!?

Now look at the lovely colour section on body repairs - as you look at these two pages say to yourself over and over until it sinks in "mine will never look like that..."

Flick to the end and look at the colour glow plug pictures, how do these compare to the glow plugs in your Mini? If you cannot locate the glow plugs in your Mini see the last translation on the list!

Haynes Manuals are the (c)opyright of a very disturbed sadist
---

Toyboy
17-06-2003, 04:11 PM
LOL @ Rupe :P I went and inquired about this Haynes manual yesty for the Astina,the manual only goes as far as the 96m :(
And i know there is a few changes to the series 3 BA Astina so it is still worth buying this manual :shock: I guess its better than no having a clue :?
What do yous guys think :wink:

KittyKatSmack
17-06-2003, 04:36 PM
This 'gal' thinks the sky is blue......

Oh sorry, more of filling the threads with **** and not being opinionated enough for you again Toyboy.... hang on, I will go and have a cry.....

:P

MrShadow
17-06-2003, 04:47 PM
bwahahaha :lol: :lol: :lol: :lol:



despite never having read a Haynes manual, coming from the printer service industry I can identify with many of those points. teeheehee

Toyboy
17-06-2003, 04:51 PM
Oh sorry, more of filling the threads with **** and not being opinionated enough for you again Toyboy.... hang on, I will go and have a cry.....

Couldnt help yaself could ya kittykatcrap :lol:

KittyKatSmack
17-06-2003, 04:54 PM
It's just too easy sometimes.....

And I just hate being a cherry picker too!

Dammit!

sirex
17-06-2003, 06:21 PM
Translation: If it isn't broken don't fix it!

:twisted:

Cosmo Dude
17-06-2003, 09:40 PM
Tool Guide
HAMMER: Originally employed as a weapon of war, the hammer nowadays is used as a kind of divining rod to locate expensive parts not far from the object we are trying to hit.
MECHANIC'S KNIFE: Used to open and slice through the contents of cardboard cartons delivered to your front door; works particularly well on boxes containing seats and convertible tops or tonneau covers.
ELECTRIC HAND DRILL: Normally used for spinning steel Pop rivets in their holes until you die of old age, but it also works great for drilling mounting holes in wings just above the brake line that goes to the rear wheel.
CRESCENT WRENCH: Used to round off bolt heads.
HACKSAW: One of a family of cutting tools built on the Ouija board principle. It transforms human energy into a crooked, unpredictable motion, and the more you attempt to influence its course, the more dismal your future becomes.
VISE-GRIPS: Used to round off bolt heads. If nothing else is available, they can also be used to transfer intense welding heat to the palm of your hand.
OXYACETYLENE TORCH: Used almost entirely for lighting various flammable objects in your garage on fire. Also handy for igniting the grease inside a brake drum you're trying to get the bearing race out of.
WHITWORTH SOCKETS: Once used for working on older British cars and motorcycles, they are now used mainly for impersonating that 9/16 or1/2 socket you've been searching for the last 15 minutes.
DRILL PRESS: A tall upright machine useful for suddenly snatching flat metal bar stock out of your hands so that it smacks you in the chest and flings your drink across the room, splattering it over the freshly painted part drying in the corner.
WIRE WHEEL: Cleans rust off old bolts and then throws them somewhere under the workbench with the speed of light. Also removes fingerprint whorls and hard-earned guitar calluses in about the time it takes you to say, "Ouch...."
HYDRAULIC FLOOR JACK: Used for lowering an automobile to the ground after you have installed your new front disk brake calipers, trapping the jack handle firmly under the front valance.
EIGHT-FOOT LONG 2X4: Used for levering an automobile upward off a hydraulic jack.
TWEEZERS: A tool for removing wood splinters - most often operated by females.
PHONE: Tool for calling your neighbor to see if he has another hydraulic floor jack. Also used for transferring grease from hands to face.
E-Z OUT BOLT AND STUD EXTRACTOR: A tool that snaps off in bolt holes and is ten times harder than any known drill bit.
TIMING LIGHT: A stroboscopic instrument for illuminating grease buildup on crankshaft pulleys.
TWO-TON ENGINE HOIST: A handy tool for testing the tensile strength of ground straps, starter motor solenoid cables, and brake lines you may have forgotten to disconnect.
CRAFTSMAN 1/2 x 16-INCH SCREWDRIVER: A large prying tool that inexplicably has an accurately machined screwdriver tip on the end without the handle.
BATTERY ELECTROLYTE TESTER: A handy tool for transferring sulfuric acid from a car battery to the inside of your toolbox after determining that your battery is dead as you thought.
AVIATION METAL SNIPS: As with hacksaw, but with the added advantage of curling panel steel.
TROUBLE LIGHT: The mechanic's own tanning booth. Sometimes called a drop light, it is a good source of vitamin D, "the sunshine vitamin," which is not otherwise found under automobiles at night. Health benefits aside, its main purpose is to consume 40-watt light bulbs. More often dark than light, the second part of its name is somewhat misleading.
OIL FILTER WRENCH: A tool used to polish a 1/2in wide ring of paint around a `spin-on' type oil filter.
PHILLIPS SCREWDRIVER: Used to remove `spin-on' oil filters and splashing oil on your shirt; can also be used, as the name implies, to round off Phillips screw heads.
AIR COMPRESSOR: An Italian machine that takes energy produced in a gas powered power plant 300 miles away and transforms it into compressed air that travels by hose to a Taiwanese Pneumatic impact wrench that grips rusty bolts last tightened 40 years ago by someone in Dagenham, Essex, and rounds them off.
CROW BAR: A tool used to crumple the metal surrounding that clip or bracket you needed to remove in order to replace a 50 cent part.
HOSE CUTTER: A tool used to cut hoses 1/2 inch too short.