Engine Mounts

[bourbon]

Hey guys,

Weve just got a new supplier on engine mounts and seems we can get alot more. for BG, BA (4cyl and V6[KF series]) and also the BJs.

If you guys have any inquiries about any of them let me know and ill see what i can do for you.

They are new aftermarket type too (not poly urathane, just the standard type).

Nathan,
Panel House

**edit** PRICES

BG (BP)
front - em-4024
rear em-3900
lh em-4337
rh em-4198

ba 4cyl (BP)
front auto em-3902
front man em-3905
rear em-3904
lh em-3907
lh auto w/bkt em-3907wba
lh man w/bkt em-3907wbm

ba v6 (KF)
front auto em-3910
front man em-4924
rear em-3904
lh em-3907
lh auto w/bkt em-3907wba
lh man w/bkt em-3907wbm

bj 2.0L 2/01- (FS) + 1.8L 9/98- (FPD)
front em-4595
rear em-4717
lh auto em-4908
lh man em-4719
rh auto w/bkt em-4999wb (to fit SP20 auto Fseries gearbox+1.8 auto+manual)
rh man reuse origional bkt em-5000 (brackets can be pressed in and out)

**UPDATED PRICES**

[89sp1.8]

nice,just curious on price per mount and would they be noticable doffrence? cheers

[bourbon]

BGs' 1.8L BP manual/auto : Front $45, Rear $50, RH (drivers side of engine) $65, LH (top of gearbox) $65.

just been looking can also get the cross member insulators as well for the BG.

depending on if yours are broken or not, you would notice a difference im pretty sure.

[chipa]

How about the side mounts for a BJ?

[bourbon]

just looking it up, is the protege mounts the same? also is it 1.8L (FPD) or 2.0L (FS)

[chipa]

Astina SP20 so the 2.0L. 03 model if that helps. Not sure if the sedan has the same mounts but I'd guess they would be the same.

[bourbon]

ok the left hand one (im guessing you got manual as well :p) would be about $95, and a right hand one (youll have to reuse your bracket, but auto one has bracket so if you find out if there the same let me know [which they do look the same from the picture] would be the same price. and one with the bracket (suppesebdly auto) is $115.

just realized can also get the eunos 30x K8 mounts and also eunos 500 (guessin same as the V6 from the BA).

[chicaboo]

Hey Bourbonerie, Why don't you just catologue all the prices for all the mounts for each car and list them? Most commonly replaced engine mounts on the BJ are the front and driver's side incidently.

Gav.

[bourbon]

will do, will get onto it :p ahahahaah

[chipa]

Hmmm damn thats tempting.. $95 for the drivers side! Hows them apples Gav?? How much to get them shipped to Albury (2640) ?

[chicaboo]

Mate, them apples are so good that Eve would pluck them from your hand as if they were from the Tree of Knowledge! :p Even if you have to pay $115 for the auto one so as to get the bracket, cause I don't know if you can separate the bracket so easily?

[chipa]

Not sure about the bracket, will have a look at the mount to check later on when I'm not so hung over.

[bourbon]

prices updated and posted up in first post. any other mount enquiries let me know.

[chicaboo]

Can you screengrab a pic of the RH mount with and without bracket for the manual BJ pleasem?

Gav.

[bourbon]

ill photo copy the page for ya gav, and show ya this weekend on "DA" Cruise :p

[chipa]

ummmm no online copy possible? Bit hard to see it from 1400 k's away :(

[bourbon]

nah we dont have any online photos chip, i dont no if gav has a scaner or something like that...maybe if i show gav he can explain it to you a bit better than i can :p

if gav ends up buying one i can get a photo and put it on our comp system and send it to ya...

[chicaboo]

Unless your engine mounts are different/better, I have no reason to experiment any further than I have. But I can use the Stony to take a photo of the whatsit sheet and send it to Chiparoo.

Gav.

[chipa]

How about a photo of the page then? :)

EDIT: cheers Gav!

[chipa]

I just want to get a cheaper alternative to OE so I can install the AWM inserts.

[Orion]

Ditto on the cheaper alternative to OEM side mounts. I have a torn drivers-side engine mount but I am waiting on my AWR sidemount inserts before I go out and get a new one. Might be worth getting these as a replacement instead of $250 from Mazda dealer.

[bourbon]

chip ill take a photo of the page tonight and see how it turns out, no guarantees...

[bourbon]

**edited list** - updated... bj 1.8L and 2.0L are the same mounts all round.

also chip the pic i got was blury as all, and sent to gav, he said would prob have to be one with bracket...

[Orion]

Bourbon and Gav,

Do you see any problems with putting the AWR side mount inserts into these mounts? If not, then sign me up for a drivers side (rh) side mount for a BJ-II 2.0L and let me know some arrangements for payment and pickup. Cheers.

[bourbon]

ok gav hasnt tried these, but if you wanna be first to try it you can be, if its wrong youll get your money back...where in brissy are you too?

[chicaboo]

Looking at the blurry piccies Boubonerie sent me, I don't see why not. I think they have just reverse engineered the oem mount... Oh, the AWR inserts are soft enough to be rather forgiving anyway. :) Otherwise we just cut **** off until it works! :p

[chipa]

Go Orion! Makes it easier with a local test dummy! Bit better than one 1300 k's away.

[Orion]

Ok guys, Im happy to be the test dummy ;) for the passenger side mount and we can also see how easily the AWR inserts will fit into it. I live in Taringa but am not too fussed if I have to travel to someone elses garage for the testing / install.

[platypus]

bourbs, so you know - the 1.6 will take the front and rear mounts, as well as the gearbox mounts with no probs

the 1.6 has totally different drivers side mount though

[bourbon]

i will look out through the book of knowledge tomorrow platy! and also let me know if any of ya want them ordered (need to come from interestate)...

[platypus]

no i don't want - i'm telling you...

[bourbon]

well this isnt true, fronts the same as is the gearbox mount but the rear mount is still different...

bourbs, so you know - the 1.6 will take the front and rear mounts, as well as the gearbox mounts with no probs

the 1.6 has totally different drivers side mount though

[bourbon]

gav and orion played around with the drivers side mount the other day and its the wrong one (with the bracket type), the bracket was too long or something...so what im gonna do is see the mechanics and talk to the suppliers to find out how to remove and press in the bracket. from what gav was sayin the SP20 auto mount (with bracket) will fit the 1.8L auto + manual... will get back to you guys about this... and thanx orion for trying it out...will hopefully be sorted in the next few days.

[Orion]

Hey Nathan, no worries about testing this gear out. As you said just need to find a someone who can take the bracket out of the old mount and put it into the replacement. Will you be ordering a manual replacement mount (i.e. one without the a bracket) to swap with the one I have at the moment?

Chipa, these mounts will also take the AWR side mount insert pieces as well. Although you might want to talk to Gav about the ones he has picked up, they look fairly decent too.

[bourbon]

just talked to the mechanics, they can do it, and they said most mechanics should be able to do it... :D

orion i can order this other one if you want, ill just alocate the money for origional one to new one, and i think there will be a bit of change to give you too...let me know if ya want me to go ahead...

[chicaboo]

Hey Bonbon, can you amend the BJ description on the front page to reflect that the auto w/- bracket will only suit F series gearboxes, ie: SP20 auto and all BJ 1.8s...

Gav.

[platypus]

well this isnt true, fronts the same as is the gearbox mount but the rear mount is still different...
trust me... i found out by getting my hands dirty and not trusting the books - i can send you the pics of a 2.0/1.8 mount on my 1.6 if you like...

[bourbon]

trust me... i found out by getting my hands dirty and not trusting the books - i can send you the pics of a 2.0/1.8 mount on my 1.6 if you like...

yes they may fit, but most likely not the right one...they have different brackets on the top of them...doesnt bother me if you got your hands dirty or not, they make certain mounts for different cars for certain reasons, if it needs different brackets keep to the origional... im not sayin your wrong or right, just sayin they are different...

[Orion]

Hey bourbon. Can you please order the other mount (manual) to swap with the auto one that I have at the moment? I think the manual mount was about $20 cheaper but whatever ..... still better than $240 from Mazda :D

[Melbastina]

I got four little goodies in the mail today (RR inserts), just gotta work out which other bits I need to replace, then off I go!

[chicaboo]

And let us know who can press the old bracket out and then rejoin it to the new one at Slacks Creek. Cos I will have to drive Darryl's new mount over to get that done, or maybe we just remove the mount out front of the shop? It's not that hard...

Gav.

[bourbon]

orion, consider manual mount ordered....chicaboo the place that said they can do it is called AUSPOM, just need to take them both mounts... there just down the road from us at work, bout 4 buildings down....and top blokes, one of them previously worked for mazda and learned all his mechanic skills on em...

[bourbon]

before i send the mount of orions back, does anyone want it? price is still $115.

**UPDATE** also price change now on the manuals, price has gone up. new price $115...sorry guys...

[chicaboo]

**UPDATE** also price change now on the manuals, price has gone up. new price $115...sorry guys...Is that price rise for the fee to have the old bracket pressed out and put into the new mount?

nah, this is just a price, i called up supplier today and the price was wrong in the book :mad: sorry bout that guys.... damned getting quoted wrong prices from suppliers always makes us look bad...