PDA

View Full Version : 4G63 EVO 5 into Familia GTX


project.r.racing
02-12-2006, 08:20 AM
Stats:

92 Mazda Familia GTX
Evo 5 Engine and Driveline Conversion
Autronic SMC ECU with launch/Flatshif/Antilag
Deloomed everthing
Twin Walbro Fuel pumps
-8 and -6 Fuel lines
Sard Race FPR
Custom Fuel Rail
600x300 Intercooler
Alloy 3" Piping
Custom Alloy Radiator
HKS Pod Filter
3" exhaust with RPS Muffler
Tial 38mm external off exhaust housing
Stainless headers
Exedy Twinplate Clutch
D2 Coilovers
Wilwood Superlight Calipers with 300mm Discs
17" Seneka Sport Mags
Racetech seats

etc etc

You can see most mods in the pics. Engine has factory internals for the time being. This will shortly change once the niggly problems on the car have been ironed out. Looking at stroking it to 2.3l, GT35/40 or similar and ~600hp atw in the future.

Cars not quite finished yet, but aiming to have interior and a detailed engine bay in time for the Nats. Will have a full race tune on ~25 psi on current setup, which should have ~230kw atw for the drags, so aiming for at least a low 12 if not high 11 sec pass.

http://i39.photobucket.com/albums/e189/deejayryry/4g63mazda.jpg

Ryan

323kid
03-12-2006, 01:57 PM
that is insane...

pr1mo
03-12-2006, 02:04 PM
so is that 4wd?

project.r.racing
03-12-2006, 09:56 PM
yeah - read 2nd line in the mods listed.

dru
03-12-2006, 10:25 PM
Yeah saw this on fl.com, pretty nuts. Definitly hit 11's I reckon, I also reckon the engine and driveline cost a dime too!

blacksp20
03-12-2006, 10:45 PM
I have had the idea of doing this type of conversion to an SP20 for a long time as it is really the only decent performance package that could legally be transplanted into a modern car that is longitudinally mounted. Obviously the inhibitive price has stopped me from even seriously contemplating such a move, but it is still on the cards if EVO engines ever get to a reasonable price.

Here's hoping.......

igateu
05-02-2007, 07:46 PM
hey man nice work, i was thinking of doing something similar but into my bfmr, how much work did u have to do to make the engine fit?

Astro Boy
05-02-2007, 08:03 PM
D2 Coilovers
Nice plug there Ryan! :p

project.r.racing
06-02-2007, 06:14 AM
I can't help it if the unknown person has D2 coilovers fitted :p

twilightprotege
06-02-2007, 08:10 AM
b3motorsports is putting a 4g63 galant vr4 motor in a mits l300 express van at the moment ;)

Mad Mat
18-08-2008, 07:37 PM
hey does anybody have the picture of this car?????? i would love to see it Hee hee

dru
18-08-2008, 07:45 PM
i think there are some on the mazda nz forum, forget the link now. But it's an awesome little familia.

Mad Mat
18-08-2008, 07:56 PM
hhhmmm but i just want a picture. to show my mate who thought it couldn't be done.

marcs_sp20
19-08-2008, 11:30 AM
Here's the link from some NZ car mag...

http://www.performancecar.co.nz/articles/heart-of-diamonds-mazda-323-gtx-familia-125

Marc

02-KQ-LASR
20-08-2008, 12:31 PM
hot as car!!
makes me wanna get a famillia! lol