[JPN] Mazdaspeed MS-01 / MS-01R / MS-01F / MS-01C / MS-01S rims

[Rupewrecht]

Ok, in this thread you'll find all the MS-01 rims for sale at any time on the auctions.


http://rupewrecht.com/forsale/MS-01chart.jpg

[Chi'sLantis]

too bad i really like the ones from the first pic only there in 5 stud which is a shame.

[Ronin (Adam)]

they're gorgeous wheels...

[mcwilly]

pitty the gold ones are 5 stud look sick

[DavoAust]

wow, love the first set of 4

is it possible to get 4 stud ones through mazda speed in aust? or is it just jpn?

[Rupewrecht]

Nah, Mazda Aus don't generally deal with Mazdaspeed stuff as they wont cover it with a warranty.

There's a few sets of 4 stud ones above.

[Plutonus]

I want gold ones. Pimpin.

[Rupewrecht]

New i can get these (plus fees/shipping):

MS-01 Magnesium
http://www.mazda.co.jp/accessories/mazdaspeed/rx8/img/whe01p.jpghttp://www.mazda.co.jp/accessories/mazdaspeed/rx8/img/whe012p.jpg
in 18x8, +40, 5x114.3. 114750yen per rim

MS-01S
http://www.mazda.co.jp/accessories/mazdaspeed/rx8/img/whe02p.jpghttp://www.mazda.co.jp/accessories/mazdaspeed/rx8/img/whe022p.jpghttp://www.mazda.co.jp/accessories/mazdaspeed/rx8/img/whe023p.jpg
17x7.5, +40, 5x114.3 - 63000yen per rim.
18x8, +40, 5x114.3 - 69300yen per rim.
19x8, +40, 5x114.3 77700yen per rim.

[DavoAust]

those MS-01S are still the hottest rims around here... too bad they cost so much and are 5 stud :(

[Abaddon]

Are the Mazdaspeed Wheels always five stud?

[Rupewrecht]

Are the Mazdaspeed Wheels always five stud?

From what i've seen:

MS-01Rs are 4 stud, but only come in 14-15 inch
MS-01Fs are 5 stud, and are 16-17 inch
MS-01Cs are 5 stud, and are 17-18 inch
MS-01Ss can be either, but the 4 stud ones are usually 15-16 inch, while the 5 stud are 16-18 inch

The MS-03s come in 4 stud as well though, and the MS-Tourings are 4 and 5 stud. MS-02s are 5 stud only.

[93_Festiva]

Has there been much come up in the 4x114.3 +40 or is it mainly 4x100 +40

Craig....

[Rupewrecht]

Has there been much come up in the 4x114.3 +40 or is it mainly 4x100 +40

Craig....

Exclusively 4x100. I can't say i've ever seen a set of 4x114.3s at all.

But the 4x100 are either +35 or +38 depending on width, not +40.

[mcwilly]

any gun metal 18s with 4 stud in mint condition

[Rupewrecht]

any gun metal 18s with 4 stud in mint condition

They don't exist.

[02-KQ-LASR]

these rims are light as right?

[Rupewrecht]

these rims are light as right?

Yeah, rims made by RAYS are generally pretty light for their size/construction.

[mcwilly]

with the 15x7 with 35 offset i wont have any problems with them fitting?

[Rupewrecht]

with the 15x7 with 35 offset i wont have any problems with them fitting?

I wouldn't think so, but i'm not 100% with BG fitment.
It depends how low your car is - i'd think that the back arches would be a problem area if there is going to be an issue.

According to the tyre calc (http://www.rims-n-tires.com/rt_specs.jsp), they'd be 9 mm closer to the struts, and 29 mm closer to the guard (compared to 14x5.5 +45 stockies).

Time to get out the tape measure, but don't forget that most tyres taper at the sides as they get closer to the tread so that will give you a little more clearance.

[Mc_Nuggets]

is the any ms-01s/18inc or 17inc Gunmetal ones, and quote for QLD shipped too please. pm me

[Rupewrecht]

is the any ms-01s/18inc or 17inc Gunmetal ones, and quote for QLD shipped too please. pm me

Not in gunmetal, and not in a width that'd fit your car. MS-01S are pretty rare in a 17x8 or 18x8. You could make a set of MS-01 from some of the pairs listed though, but the offset would be on the high side.

[mussing]

Man I really want a set of these, but I can't justify it when I haven't got my sound system sorted yet...

I think the applicable term is 'commodity fetish'...

[Rupewrecht]

Well M J just picked up a silver set of MS-01Rs from me on the weekend, so you'll see how they look on a BG Astina soon.

[M J]

As Rupe just said, i got a set of the MS01-R rims, hopefully will have a few shots after a trial fit on saturday, car is getting a well deserved service tomorrow, stay tuned for some pics soon

[M J]

As promised just a couple of pics, apologies for the crappy camera phone

http://img98.imageshack.us/img98/5981/image044bh3.th.jpg (http://img98.imageshack.us/my.php?image=image044bh3.jpg)

http://img385.imageshack.us/img385/9072/image045ro8.th.jpg (http://img385.imageshack.us/my.php?image=image045ro8.jpg)

http://img521.imageshack.us/img521/9183/image048yu8.th.jpg (http://img521.imageshack.us/my.php?image=image048yu8.jpg)

I would also like to say a big thanks to Dan, I can't recommend him enough and i'm very happy with the new rims

[project.r.racing]

Looking good M J. Very wide in the arches huh?

[infini]

I'm in love with the gunmetal ones!!
actualy no... i'm in love with all the ms-01s'!!
one day i'll get a set...

[Ice88]

How much does a set of MS-01S's go for Rupe? Are wheels like most stuff multiple by 2 to get rough estimate landed?

I know i ask alot of questions but i am curious, sorry :(

[Rupewrecht]

How much does a set of MS-01S's go for Rupe? Are wheels like most stuff multiple by 2 to get rough estimate landed?

I know i ask alot of questions but i am curious, sorry :(

Anywhere between about 50-20000 depending on color and size. 70% of sets are staggered sets though for RX7 (8/9") but there are RX8 sets in 18x8 +40 that would be closest to fitting an SP20 that pop up from time to time. Also some in 16x* sometimes too, but they're usually 4 stud.

Landed cost - 50000yen sell = $1400 landed, 100000 = $2460 landed. That's just a rough cost, as it depends where they're located in Japan etc.

And always happy to answer questions! :)

[jesiotrot]

Going for the gold look Jess ?

ha good stuff if you go with it. let me know how it clears.

Not sure what it would look like against the grey. But i like the width and offset. My XR6 wheels were 17x8 +36 and they fit ok but would rub on the outer guard sometimes. I think the +35 would make it perfect.

The ones i have currently are 17x7 +29. Which means they sit about 1-2mm out furthter than the 17x8 +35's. They look good but i'd really like 8" wide!

http://i227.photobucket.com/albums/dd200/jesiotrot/wagon/S1030412.jpg

[marcusus]

Hey Rupe, do the stickers for MS-01Rs come up at all on their own?

[Rupewrecht]

Hey Rupe, do the stickers for MS-01Rs come up at all on their own?

Nah, i've never seen them. Getting them for MS-01S rims might be possible, but not anything else as MS don't stock/make much in the way of pre-2002 stuff (which was the last time the MS-01Rs were listed as for sale).

[marcusus]

Interesting. Reckon you can chuck up any finds you get for any rim stickers in this thread?

[Cosmo Dude]

I'll second that. I've got two of 'em being re-finished ATM.

[Rupewrecht]

Yeah, will do. I'll try my contacts in Japan - i should be able to get the 'Mazdaspeed ones on the currents MS-01S, but i doubt that i could get the "MS-01R' or the 'Roadster' ones. Worth a try though.

[marcusus]

It's actually the MS-01R stickers that'll be the problem. The 'Mazdaspeed' an 'Roadster' stickers are fairly generic images which should be able to be pulled off the net and changed to sticker format. The MS-01R is what concerns me most. I reckon the 'R' is the same as the 'R' in 'Roadster', and the 'MS-01' bit looks like a generic font with italics. So you could probably get around it, but it'd be much nicer to have a factory set.

[Rupewrecht]

I'll see what i can do. If not, i can reproduce them easily enough - at least while i still have a set of the MS-01Rs in stock!

[marcusus]

I'll see what i can do. If not, i can reproduce them easily enough - at least while i still have a set of the MS-01Rs in stock!
Cool! That'd be awesome if I could get a hold of a new set of stickers! Keep us updated :D

[Marlon]

Cool! That'd be awesome if I could get a hold of a new set of stickers! Keep us updated :D

+1 I'm interested

[MX6T2NV]

Hey Rupe! I got my MS-01F's last night :D Nice packing!
anyway to contribue to the thread, are you able to get stickers for:
MS-01C - which says "MazdaSpeed Competition"
MS-01F - which says "Forged Monoblock"(including the small writing underneath it)
And any idea how much they would be?

[Rupewrecht]

Hey Rupe! I got my MS-01F's last night :D Nice packing!
anyway to contribue to the thread, are you able to get stickers for:
MS-01C - which says "MazdaSpeed Competition"
MS-01F - which says "Forged Monoblock"(including the small writing underneath it)
And any idea how much they would be?

I've asked about the MS-01R stickers, when i get a reply about that i'll ask about the MS-01C stickers. Absolutely no idea on cost though.

[Rupewrecht]

It's actually the MS-01R stickers that'll be the problem. The 'Mazdaspeed' an 'Roadster' stickers are fairly generic images which should be able to be pulled off the net and changed to sticker format. The MS-01R is what concerns me most. I reckon the 'R' is the same as the 'R' in 'Roadster', and the 'MS-01' bit looks like a generic font with italics. So you could probably get around it, but it'd be much nicer to have a factory set.

Finally got a reply back, and no go for the 'MS-01R' sticker or the 'Mazdaspeed Roadster' ones - just too old.

Cosmo Dude, what's the length of the 'Mazdaspeed' sticker on yours? I might be able to get them but I've been asked the length of them

[marcusus]

Finally got a reply back, and no go for the 'MS-01R' sticker or the 'Mazdaspeed Roadster' ones - just too old.

Cosmo Dude, what's the length of the 'Mazdaspeed' sticker on yours? I might be able to get them but I've been asked the length of them
No surprises there really.

As mentioned, I don't think the 'Mazdaspeed' or 'Roadster' text will be hard to replicate. It's the 'MS-01R' that'll be tricky...

[Rupewrecht]

I'll second that. I've got two of 'em being re-finished ATM.

No luck on the MS-01S stickers either.

[Rupewrecht]

Also, i will have the 'Mazdaspeed' spoke stickers (printed/cut int he original clear/black style), and the full MS-01R wheel stickers (spoke and rim) available for purchase soon.

[kuro88]

damn i want those in 4x100 :(

[Ghoru]

yeh seems like us BG guys get pretty screwed over when it comes to good stuff

[Rupewrecht]

yeh seems like us BG guys get pretty screwed over when it comes to good stuff

You've got to realise that when your car was sold new that rims bigger than 15" on small cars was very uncommon. Even the FD RX-7 only started off with 16" rims.
It's only with the MS-01S that started around the year 2000 that anything bigger than 15 was sold by Mazdaspeed in 4x100.

[kuro88]

im pretty shure the mazdaspeed eunos presso had ms1 in 16"

thats what im looking for.. or mby 17", but 16s would look better i guess

[Mooneggs]

im pretty shure the mazdaspeed eunos presso had ms1 in 16"

thats what im looking for.. or mby 17", but 16s would look better i guess

incorrect, the AZ-3/Presso MS package came with MS01 15 x 6.5 +35 4x100 rims

[Rupewrecht]

Yep, Mark is correct - 15" only.

Only the FWD 5x114.3 stud pattern cars got bigger rims (CBA Lantis/MX-6 etc) - and they got 16x7 +35.

[Rupewrecht]

Spanners now available for MS-01 rims

http://rupewrecht.com/forsale/fs_ms_spanners.jpg

Click here for more info: http://www.astinagt.com/forums/showpost.php?p=256355&postcount=820

[Rupewrecht]

Now available:

Replacement Mazdaspeed spoke stickers for MS-01, MS-01F, MS-01S, and MS Touring rims.

http://rupewrecht.com/forsale/fs_ms_mswheelstickers.jpg


Replacement stickers for MS-01R wheels.

http://rupewrecht.com/forsale/fs_ms_mswheelms01rstickers.jpg


See this thread (http://www.astinagt.com/forums/showthread.php?t=17726) for more info/prices.

[Rupewrecht]

Just an update for those playing at home: the Mazdaspeed MS-01S and MS-01MAG rims have been discontinued by Rays/Mazdaspeed, and there's no stock left. So if you're after a set, secondhand will be your only option.

The only rims currently made for Mazdaspeed are the Enkei-made multispoke rims as found here: http://www.mazda.co.jp/accessories/mazdaspeed/wheel.html

[Rupewrecht]

Dan, what's the fitment information for the MS-01f rims? I know they're 5 stud and 16" but what's the ET?

Depends on the width.
16x7 +35
16x8 +35/+40
16x9 +40/+45

[Cosmo Dude]

16x7 5x114.3 does exist, but is extremely rare.

It took me 3 years to collect all four of my 16x7 5x114.3 with a 35 offset ;)

[Rupewrecht]

Pair of MS-01 in 17x9 +44 5x114.3

http://page11.auctions.yahoo.co.jp/jp/auction/n96869225

http://img339.auctions.yahoo.co.jp/users/0/1/2/5/apacchi01-img600x450-1311646680grihzx7967.jpg

Buy It Now of 12600yen/$156, 1 day

[Rupewrecht]

Set of MS-01F in 16x7 +35 / 16x8 +35 5x114.3

http://www.upgarage.com/upgarage/stock/1/1/1204403900168/403

http://www.upgarage.com/upgarage/gazou/1204/1204403/1204403900168/1204403900168s0.jpg

Buy It Now of 59900yen/$710

[Rupewrecht]

Single MS-01SLM in 17x8 +35 5x114.3

http://page2.auctions.yahoo.co.jp/jp/auction/b133492463

http://auctions.c.yimg.jp/img347.auctions.yahoo.co.jp/users/6/0/9/0/dfspq246-img480x360-1332103798icepgf58549.jpg

5000yen/$60, 6 days

[Rupewrecht]

MS-01F flyers

http://page6.auctions.yahoo.co.jp/jp/auction/f115682931

http://auctions.c.yimg.jp/img263.auctions.yahoo.co.jp/users/4/0/8/4/ms95614108-img600x450-1336049529czubr195296.jpg

400yen/$5, 2 days

[Rupewrecht]

Set of MS-01R in 15x7 +35 4x100 in red, complete with nuts and spanner

http://page8.auctions.yahoo.co.jp/jp/auction/h164047018

http://auctions.c.yimg.jp/img263.auctions.yahoo.co.jp/users/2/8/4/0/hajime9917-img600x450-13356058534dxh9h53615.jpg

Buy It Now of 40000yen/$499, 6 days

[Rupewrecht]

Set of MS-01LM in 17x8 +35 / 17x9 +34, 5x114.3

http://page2.auctions.yahoo.co.jp/jp/auction/b135136917

http://auctions.c.yimg.jp/img237.auctions.yahoo.co.jp/users/3/4/6/5/kiyo444777-img600x450-1336642524xswpch66785.jpg

50000yen/$622, 2 days

[Rupewrecht]

Pair of MS-01LM in 17x8 +35 5x114.3

http://page16.auctions.yahoo.co.jp/jp/auction/u40955437

http://auctions.c.yimg.jp/img369.auctions.yahoo.co.jp/users/6/9/7/1/fmaina0909-img600x450-1336746541qjntrb43179.jpg

7000yen/$88, 4 days

[Rupewrecht]

Pair of MS-01LM in 17x9 +34 5x114.3

http://page9.auctions.yahoo.co.jp/jp/auction/k147959376

http://auctions.c.yimg.jp/img359.auctions.yahoo.co.jp/users/6/9/7/1/fmaina0909-img600x450-1336746156rgiro910007.jpg

10000yen/$125, 4 days

[Rupewrecht]

Set of MS-01LM in 16x7 +35 5x114.3

http://page7.auctions.yahoo.co.jp/jp/auction/g109219046

http://auctions.c.yimg.jp/img347.auctions.yahoo.co.jp/users/4/4/8/4/takarajet-img600x450-1336738901yzxeql95832.jpg

19800yen/$248, 1 day

[Rupewrecht]

Pair of MS-01LM in 16x7 +35 5x114.3

http://page14.auctions.yahoo.co.jp/jp/auction/s278600063

http://auctions.c.yimg.jp/f46batchimg.auctions.yahoo.co.jp/users/4/3/2/2/manekimoaizou-imgbatch_1336984112/600x450-2012051400007.jpg

3980yen/$50, 6 days

[Rupewrecht]

Set of MS-01LM in 18x8 +38 / 18x9 +38 5x114.3

http://page21.auctions.yahoo.co.jp/jp/auction/j166459986

http://auctions.c.yimg.jp/f45batchimg.auctions.yahoo.co.jp/users/0/7/3/6/u_b_001-imgbatch_1337077911/600x450-2012051500008.jpg

Current bid is 1000yen/$13, 3 days

[Rupewrecht]

Pair of MS-01LM in 17x8 +35 5x114.3

http://page8.auctions.yahoo.co.jp/jp/auction/h164215246

http://auctions.c.yimg.jp/img335.auctions.yahoo.co.jp/users/8/7/1/8/free_337-img600x450-1337049136t6hxag89437.jpg

5000yen/$63, 6 days

[Rupewrecht]

Pair of MS-01LM in 17x9 +44 5x114.3

http://page9.auctions.yahoo.co.jp/jp/auction/k153387395

http://auctions.c.yimg.jp/img335.auctions.yahoo.co.jp/users/8/7/1/8/free_337-img600x450-1337049136t6hxag89437.jpg

6000yen/$76, 6 days