PDA

View Full Version : H.I.D. Xenon Light Kits!

Astro Boy
20-06-2007, 11:31 AM
GSL RallySport stocks the complete range of High Intensity Discharge (H.I.D.) Light Kits

I've held off publicising these cause of the stigma attached with cheap HID kits, but after having these for a while, trailing them in different cars (including rally), I'm confident these ones are the go! Slightly more expensive than your cheapest Chinese imports, but nothing like the price of the name brands!

Warranted for 18 months road use, I've also been working closely with the importer to warrant these for 12 months in a rally car!!! Now that's confidence! :p

Price as follows:

- H1,H3,H7,H8,H9,H11,9004,9005,9007,D2S,D2R,D2C in 12v/35w $265
- As Above but in 12v/55w, or 24v/35w $325
- H4 35w (Xenon Low, Halogen Hi, 2 Ballast) $275
- H4 35w (Xenon Moving Hi/Low, 2 Ballast) $335
- H4 35w (Bi-Xenon, 4 Ballast) $525
- Any of the above H4's in 55w or 24v/35w add $50

Available in bulb temperatures from 4300K to 12000K with 6000K being the most popular!

Any other questions just let me know! We all know the difference that HID makes so I'm not going to bother putting up photos etc.

Cheers,
Greg
bourbon
20-06-2007, 12:22 PM
what brand was it?
Astro Boy
20-06-2007, 12:36 PM
Vacar
bourbon
20-06-2007, 01:19 PM
do you get all the sizes??? as im prob gonna be lookin for H7 ;) ;) ;) or what ever projector beams are....
Astro Boy
20-06-2007, 01:38 PM
- H1,H3,H7,H8,H9,H11,9004,9005,9007,D2S,D2R,D2C in 12v/35w $265
- As Above but in 12v/55w, or 24v/35w $325
.;).
bourbon
21-06-2007, 02:08 PM
alright smart arse :p hahah ill get back to ya when i getthe new system... :D
addy
22-06-2007, 11:54 PM
Wat are the fitting instructions like on these? Any diagrams?
Riceboy
23-06-2007, 11:37 AM
i would believe they are just bolt in and the wiring harness to your stock bulb harness and that would go to the ballast/ignitor and that would go to the new hid bulb...
Astro Boy
25-06-2007, 10:46 AM
Wat are the fitting instructions like on these? Any diagrams?
Yep, its all just bolt in, no modifying existing harnesses at all... The HID themselves go directly to your battery, then it sources the signal from the original loom using males connects same as on the original bulbs...

Installation would be 15mins if you knew what you were doing, 45 if you didn't...