EOI: [AUS] BA Polished sill plate logos

[Rupewrecht]

Ok, to those of you that have these:

http://www.rupewrecht.com/forsale/fs_lantis_sidesills.jpg

Would you be interested in a set of replacement logos that say ASTINA (in the actual badge font) to replace the Lantis ones?

Pretty much like this:
http://rupewrecht.com/forsale/sill_astinabadge.jpg

I've found a mob that can made them with the same process - domed resin over a logo. I'm looking at getting something different done, but thought i'd offer to get some made for you guys.

Cost looks like being around $50 a set though. Unit price (each badge) is $11.14 + a once off $40 setup fee. You pay less of the setup fee depending on how many sets get ordered.

It's not cheap, but just thought some of you might be interested.

[Plutonus]

Depends how low they go... $50 is a bit steep. But it is for 4 badges I suppose.

[Rupewrecht]

Wont be much less. $50 is working on 4-5 sets being sold.

[pr1mo]

not many people have these and many that do are going for the full A spec jap look anyway. you might have one or two for BHA familia guys with the 'familia' lettering but i dont think astina will take off 'mazdaspeed' might tho

[Rupewrecht]

Just an expression of interest, Mike. I'm not fussed if nothing happens as i'm doing something different anyway.

If anyone does want anything different, it's a $40 fee for each different design...so if you want to reduce the price, then you'll need to convince others ;)

[marcs_sp20]

can SP20 be done?

[Rupewrecht]

Yeah, anything can be done.

This is the company that does them:
http://www.badge-a-minit.com.au/

i found them via this site - http://www.sillbeer.com/ - who got some nice badges for a Silvia made up
http://www.sillbeer.com/images/interior/specb-emblems.jpg

[Dogo]

interested. indeed the price isnt cheap but for custom made stuff thats fairly reasonable.

IF we get them I'd like

ASTINA
TURBO

with TURBO in smaller letters under the ASTINA

I can't remember ( but can check later ) if the logo is inset or on top of the sills. If its on top we could get a different shape. And if its inset we could cover it with a plate ala the silvia ones.

any idea how much those silvia style ones are ?

[Rupewrecht]

The Lantis ones are inset by about 0.5->1mm. You could put them on top and just put a spacer underneath to build the inset up.

Dunno on the Silvia prices - doesn't mention it.

[Plutonus]

Hmmm considering it... but I am going for the JDM look...

[Dogo]

then get LANTIS written in japanese ;)

[Cincinnatus]

a lil confused? is that 50 for the set including the set of 4 sills ?

[Rupewrecht]

Go read the first post again ;)

[Cincinnatus]

Ahhh, how do i become of those that have them thingys?

[Rupewrecht]

Keep an eye on my traders section :)

I do have a set coming in with the next container, and i'll post them up then they get here.

[Hebz]

I've called shotgun on them though :p :p

Heb

[Rupewrecht]

Oh have you now? When did you do that? :p

[Plutonus]

Just then? :p

[Hebz]

Oh have you now? When did you do that? :p
At 3.07AM on the 31st of July 2007 :p

Heb

[Rupewrecht]

At 3.07AM on the 31st of July 2007 :p

Sorry, someone beat you to it then - that's why i asked ;)

[Plutonus]

Haha Rupe ripped you :p

[Hebz]

Haha I was joking anyway :p

i'll post them up then they get here.
I thought that you meant you would post them up . . . for sale

Silly confusing clam :p

Heb

[Rupewrecht]

Well i was going to...but someone indicated firm interest!


Anyway, for anyone that wants the badges, the info is there for you to do with it what you will. :)

[sandman_kar]

hmm id be interested. just gotta get my hands on sum of those sills wen i can afford them

[Rupewrecht]

Further to this, i've found a cheaper supplier that can do what they call 'prototype run', where they'll do a few different designs at once.

So for 16 badges (so thats 4 different sets), it'd be $260. Works out to be $65 a set.

Anyone interested soon? Seeing as i have to cannibalise my own sills to make up a couple of sets i've bought that have had missing ones, i want to do this within the next few weeks

[Mad-Season]

I could be interested. I found mine cheap and local so I wouldn't be breaking the bank if I bought proper badges for them.

[arkitekt]

I could be interested also because i only have 2 logos currently and could do with the other 2, just doesn't look right.

[Mad-Season]

If I did get the Familia ones, you could always buy my Lantis ones :D

[arkitekt]

If I did get the Familia ones, you could always buy my Lantis ones :D

i could take you up on that offer depending on how much :D and i know you got the sills for 25 bux NZ.. you beat me to the auction lol

[A L 3 X]

does anyone who has done this have any lantis stickers they will sell...i only need 1?

[Rupewrecht]

does anyone who has done this have any lantis stickers they will sell...i only need 1?

Shoot me a PM, i've got a spare

[A L 3 X]

I didnt get the sill plates int he end as i was a bit skint....wish i had as they were only £55 delivered....i might see if he still has them