[JDM] Mazdaspeed Seats
Mazdaspeed Seats.
Images: http://rupewrecht.com/forsale/jpn_MS_seats.jpg Synthetic Leather 'Sport' seats come in Red, White or Black with the Grey MS centre. White and Black most common. 'Type-F' Suede ones come in Navy Blue, Black, Red or Grey. Black most common. Rails are built-in to the seat - and therefore they are a universal rail - but there are car-specific brackets that attach to each corner of the rails. They are now unavailable new, as they (along with many older MS parts) have been discontinued. Secondhand ones will appear below, and generally sell for about 15000-40000 per seat, or 40000-80000 a pair (depending on condition of course) |
how damn nice are the
Suede ones in Navy Blue and the Black ones :P man i wish sum1 sold them cheap i would try to snak a set of them :P |
People been checkin' out your MS seat install thread then pop over here for a look hehe.
That 30000yen, black seat(s) auction, how much to land that here in NZ? |
C'mon people, click the link. i can't do all the work for you....this means you, Kyle :P
But in this case, only one pictured of the Black Type F, so only one seat. current bid is 30000, buy it now is 45000. 23 hours left. based on a 35000 sell price, it'd be about $740 landed in Aus, and at a guess +100 to ship to NZ. You'd be better off buying the 60000yen pair of black Sport ones higher up the thread, IMO. Only one lot of fees/shipping etc then, and would be under $1300 for the pair. |
Just a quick question about these seats to satisfy my own curiosity (not in the market myself, maybe in the future if I start prettying up the ol' 323).
Do any/all of these seats suit a 2-door (eg. the drivers backrest in my 323 flips forward and the passengers backrest flips forward and slides the base forward in the one motion)? |
They all flip forward via the lever on the side, but don't slide forward as well. At least not with my BA application.
|
Quote:
A. |
Quote:
|
Oh for what it's worth - my size person doesn't fit well in the the seats, the thigh bolsters need to be spread to make them seats useable. Slimmer people would be fine though.
A. |
I've sat in the MS seats and I like them. Problem I found was that the MS rails mimic the JDM rails so they sit the seats much further forward than ADM and don't go back as far.
|
Quote:
|
I should stop looking at these and get mine retrimmed instead. They're looking a bit "loved"
|
can u get back seats for a BJ model?
|
You can't get back seats for any car.
|
Quote:
|
Quote:
|
Quote:
|
Quote:
You'll be in this situation for any aftermarket seats you buy, as few make rails to fit a BA. At least i've got some mounts i can send you diagrams of. |
Quote:
|
Might take me a bit to get detailed specs, as i'd have to pull my seats out :p
I'll take some pics during the week tho. |
Thanks Rupe, your a champ
|
Quote:
They can be fitted to a BA, but you'd need to buy/make BA brackets to fit to the universal MS rails. They're suede. And about $1280 for that pair landed. |
Quote:
Cheers for that - I will think on it. You have no idea how "comfy" these things are do you? :rolleyes: As stupid a question as that may sound. |
Quote:
Skitz and Nate (not Hairy Nate) also have them, and only have good feedback about them afaik. Don't forget i've got one of those in stock (and another one coming this container) and the black Sports as well. |
Hey Rupe, does yours have those little levers on the side? I'm guessing they are lumbar support or something, but mine never stay in position, they always flip back to off - I really don't know how to use them lol.
Hope you don't mind me going off topic! but here are mine harnessed up http://hometown.aol.co.uk/SJakielski...e/Image026.jpg |
Quote:
They look cool with the harnesses! |
how hard is it too install these into my laser?
|
Quote:
Quote:
Quote:
|
what would be the av price shipped for a pair?
eg the red pair a few posts up? |
Quote:
A pair @ 40000 would be $900 landed. 50000 = $1050, 60000 = $1200, 70000 = $1350. That's with the exchange rate hovering around the 100yen = $1 mark. |
Set of drivers brackets for an MX5. They show what i mean when i say the rails are all the same, but have a bracket on each corner
http://rupewrecht.com/forsale/fs_ms_seatbrackets.jpg |
so these mounting brackets are similar as what would be required for a bg astina
|
Quote:
|
Eventually, I hope to reduce the amount of my wife's makeup smeared on the passenger window and the headbutting my left shouder by installing more supportive seats. She's pretty small at 52kg and I'm tall and skinny. WRX seats feel perfect for me. Do you think Type F would be suitable? Are there brackets available for a BJII? I suppose the cost of getting them to Cairns would be scary.
|
Quote:
I've never seen brackets for the BJ, and sourcing some for BJ isn't possible now that the seats have been discontinued. But they could easily be fabricated as they're a pretty simple design, or it may be possible to adapt part of your existing rail. I've shipped some to Nate in QLD before for around $120, if memory serves correctly. |
the black sports are awesome
shame its not a pair |
I actually just fitted some to a mates' NA MX5 last weekend.
http://i178.photobucket.com/albums/w...81011_0082.jpg And i'm waiting to hear back as to whether i've sold the other pair of black Sports i have. |
damn those seats are awesome!
im in love haha |
Quote:
|
Hi there Rupewrecht. I'm interested in buying one pair just like the one you installed in the NA MX-5. I have one also... Here's the thing, i'm from Portugal. Do you thing you can get them shipped over here. How much will it cost?
|
All times are GMT +10. The time now is 12:06 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
2001- 2010 AstinaGT