Just Added: 23/9/11
Carbing 3 point front strut brace for FD RX-7. Aluminium version, extremely light. With brake master cylinder stopper. Excellent condition, some small gouges on rearside of brace that aren't really noticeable once installed. $SOLD http://www.rupewrecht.com/forsale/fs...ng3ptbrace.jpg Mazdaspeed Rear Wing for FD RX-7. First version of MS wing for FD, predating the A-Spec Kit. Fibreglass, quite light. Excellent condition. (Almost perfect for Astina Hardtop, too!) $194 http://www.rupewrecht.com/forsale/fs_ms_fd_rearwing.jpg AutoExe Lower Control Arm Brace for FD RX-7. Good condition, comes with mounts. No bends but some small marks. $167 http://www.rupewrecht.com/forsale/fs...xelcabrace.jpg |
Just Added: 23/9/11
Mazdaspeed MS-03 set in 15x7 +35 4x100. Factory red finish - very rare. Good condition, some oxidisation and minor gutter rash on lips. $SOLD http://www.rupewrecht.com/forsale/fs...15x7redset.jpg Mazdaspeed MS-01R single rim in 15x7 +35 4x100. Factory black finish. Good condition, some oxidisation and minor gutter rash to lip. $SOLD http://www.rupewrecht.com/forsale/fs...ingleblack.jpg Pair of Mazdaspeed MS-01 wheels in 17x8 +35 5x114.3. Red finish, lips are in excellent polished condition apart from some rash as pictured. $288. http://www.rupewrecht.com/forsale/fs...7x8redpair.jpg |
Quote:
|
Send it up with my wheels to save postage ;)
|
Quote:
Quote:
|
out of interest, what would the shipping cost increase to if adding the rims? (i.e. how much cheaper is it for me/chewy) ill be paying for the rims over the next 2-3 weeks...almaz hurt my wallet!
|
Quote:
|
cool. i'll put a deposit in :D
|
Rupe, any of these mazda speed seats (in black) got really good support? Like if you press into the backrest, would you be able to source which one is in the best condition with the most support foam left?
I've got lumbar back issues which have been constantly aggravated by the seats in my astina (13 years old, with the same lady sitting in them day in day out, have worn it in one particular fashion)...So i'm definitely needing new seats/support. Cheers |
They are narrower, so you have to reasonably skinny to fit without ruining the foam. In mine, the sides are crushed due to them being so high, getting in and out makes it Moore difficult,possibly not good for you, depending on the type and severity of pain. More than welcome to sit in mine here, even though they aren't in the car, you'd get the idea. Mine also have less adjustments than stock, just one tilt up and down rather than 3
... |
Quote:
But yes they're a bit harder to get out of due to the higher sides - but they're still better than something like a Recaro SR3 which are a pain in the arse to get out of. You don't have to be skinny, but someone with quite large hips may have issues. I'll check which one is the best and shoot you a PM. |
Sounding good Dan. Thanks mate.
|
Come and try mine if you'd like. Then start saving!
|
this is awkward..i just went to find the "like" button for tc3's post :|
|
I have had both SR3 and Mazdaspeed sports and id say the Mazdaspeed are a better day to day seat however the SR3 are even more supportive allbeit with much higher bolsters making getting in and out harder.
If i were racing every 2nd weekend id have the SR3 if i were driving round town the Mazdaspeeds are the way to go. |
Just Added: 27/9/11
BG Familia Astina Rear Garnish. Fitted to JDM BG Astinas (and different to AUSDM version). Perfect condition. $SOLD http://www.rupewrecht.com/forsale/fs...argarnish2.jpg BG 4DR Sedan Shop Options catalogue. 20 pages, excellent condition. $SOLD http://www.rupewrecht.com/forsale/fs_bg_catalog6.jpg BG 3DR Sedan Shop Options catalogue. 20 pages, excellent condition. $SOLD http://www.rupewrecht.com/forsale/fs_bg_catalog7.jpg Mazdaspeed front strut brace for CBA Lantis / BA Astina / BHA Protege. Very light and strong, anodised gold ends. Good condition. Getting extremely hard to find these days. $SOLD http://www.rupewrecht.com/forsale/fs...ntisbrace5.jpg AutoExe grille for BJII Astina / Protege / Familia. Fits SP20 / Sport20. Excellent condition, made of FRP. $SOLD http://www.rupewrecht.com/forsale/fs...exegrille2.jpg AutoExe K&N carbonfibre ram air intake for BJ Astina / Protege / Familia. Comes with silicone adapter, bracket, and sensor. Good condition. $SOLD http://www.rupewrecht.com/forsale/fs..._cfintake3.jpg Eunos 30X / Mazda AZ-3 / Presso front lip. As fitted to the top-spec AZ-3s in Japan. Plastic, not fibreglass. Excellent condition. $SOLD http://www.rupewrecht.com/forsale/fs_az3_frontlip.jpg |
SOLD:
MintiBlue grille for BJI AutoExe CF intake for BJ Mazdaspeed seat in black/grey mesh Mazdaspeed MS-01 circlips FC RX-7 suede boots Fujitsubo exhaust for Lantis Nardi boss kit spacer Mazdaspeed CF-look gearknob (the one below) Fet Sports Rear Strut Brace for AZ-3 AZ-3 JDM Front Lip |
Just Added: 29/9/11
Mazdaspeed Carbon-look gearknob. Excellent condition. $SOLD http://www.rupewrecht.com/forsale/fs...okgearknob.jpg Mazdaspeed Carbon/Aluminium Handbrake cover in Silver. Good condition. $SOLD http://www.rupewrecht.com/forsale/fs...kecfsilver.jpg Mazdaspeed Radiator Cap. New, unboxed. 1.3 bar. Discontinued and hard to find. Fits: DW & DY Demio, BJ manual. $79 http://www.rupewrecht.com/forsale/fs...dcapgreen2.jpg |
Just Added: 5/10/2011
Zoom Engineering padded flat-top gauge hood for NA. Stitched leather, excellent condition. $SOLD http://rupewrecht.com/forsale/fs_mx5...mgaugehood.jpg Mazdaspeed roll bar for NA and NB MX-5 in Chrome. Good condition. $SOLD http://rupewrecht.com/forsale/fs_ms_mx5rollbar23.jpg Beatrush by Laile differential brace for NA8 MX-5. Bushes in good condition, no bends. $168 http://rupewrecht.com/forsale/fs_mx5...ediffbrace.jpg Jackson Racing cold air intake for NA. Comes with ECU, loom, AFM and filter etc. Filter could do with replacement, but i can source those. Some cracks/damage to the top cover, but is repairable with a little of work. $287 http://rupewrecht.com/forsale/fs_mx5...ksonintake.jpg Carbonfibre gauge hood for NA with extra gauge holder. Light construction, but some wear/mark at the top as pictured. $SOLD http://rupewrecht.com/forsale/fs_mx5_nacfgaugehood.jpg Mazdaspeed roll bar for NA and NB MX-5 in Black. Good condition. $SOLD http://rupewrecht.com/forsale/fs_ms_mx5rollbar24.jpg |
Just Added: 5/10/2011
Mazdaspeed strut brace for Eunos 30X / Mazda AZ-3 / Presso / MX-3. Excellent condition, very light. $SOLD http://rupewrecht.com/forsale/fs_ms_az3strutbrace.jpg Fujitsubo (FGK) LegalisR exhaust for CBA Lantis Coupe / BA Astina Hatch. Stainless steel catback. 60mm piping, 100mm tip. Good condition, but some discoloration to muffler. No rattles. $SOLD http://rupewrecht.com/forsale/fs_lan...austhatch3.jpg AutoExe 3 point front strut brace for BJ Familia / Astina / Protege. Aluminium version, extremely light. With brake master cylinder stopper. Made by Carbing. Very rare. $SOLD http://rupewrecht.com/forsale/fs_bj_carbing3ptbrace.jpg Nardi Steering Wheel. Excellent condition, no airbag. $SOLD http://rupewrecht.com/forsale/fs_bj_...irbagwheel.jpg |
All times are GMT +10. The time now is 07:18 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
2001- 2010 AstinaGT