AstinaGT Forums

AstinaGT Forums (http://www.astinagt.com/forums/index.php)
-   Rupewrecht's JDM Parts - jdmparts.rupewrecht.com (http://www.astinagt.com/forums/forumdisplay.php?f=43)
-   -   FS: [AUS] Mazdaspeed Seat Brackets for BA, BG and NA/NB (http://www.astinagt.com/forums/showthread.php?t=16715)

Rupewrecht 07-07-2010 02:07 PM

FS: [AUS] Mazdaspeed Seat Brackets for BA, BG and NA/NB
 
Mazdaspeed seats will fit in any car, but the seats themselves have an integral rail that cannot be removed, unlike most aftermarket seats.
This means they require a set of adapter brackets that mount to the corner of the integral rail for each different car.

These brackets are quite hard to find for most models, and are unavailable new from Mazda/Mazdaspeed for anything pre-2005.

So, i'm looking at getting drivers and passenger brackets replicated for:
- CBA Lantis / BA Astina / 323F
- BG Astina / BG Familia + Protege 3DR Hatch and BG Sedan (not 4WD) / Eunos 30X / Mazda MX-3 / Mazda Presso / Autozam AZ-3 / Eunos 100
- NA/NB MX-5 / Miata / Eunos Roadster

- No BJ ones at this stage, as i'd have to find them on the auctions and i don't think i've ever seen a set!

This will give anyone looking at the seats a much easier time to fit them - it's just a few simple bolts.

Projected cost is $85 per seat.

Ideally, i'd need 5-10 firm orders of each to make it worthwhile, and to cushion some of the $800+ outlay for each type.

But honestly, i'd be happy to sell a set of brackets with a seat for a decent amount less, just to sell a seat.

Interest?

Rupewrecht 12-07-2010 06:26 PM

Here's a pic of the bottom of a Mazdaspeed seat, showing the integral rail. I've had a good look at the rail and it's part of the seat - to remove it would make the seat collapse!

http://rupewrecht.com/forsale/fs_ms_...asurements.jpg

Rupewrecht 12-07-2010 09:15 PM

After getting a couple of questions about this, these brackets bolt to the seat, and then bolt to the floor.

The large holes are the the ones that bolt to the floor, and the 2 set of small holes bolt to the studs on each corner of the rail on the Mazdaspeed seat base.

There is no need for anything else to fit a Mazdaspeed seat to your car, apart from a set of these brackets.

http://rupewrecht.com/forsale/fs_ms_...tbrackets3.jpg

project.r.racing 13-07-2010 06:49 PM

keen.
i'd also assume alot of mx5 boys would be also

koan123 25-07-2010 07:35 AM

I've been directed here from MX5nutz, and I'd happily take a set of these!

70NYD 25-07-2010 10:33 AM

im keen also as u already know :)

Ghoru 12-09-2010 06:47 AM

i take it these never eventuated at all?

Rupewrecht 12-09-2010 01:20 PM

They will, but when i have to find $1700 per car to get them made it's going to take a little while.

phly 15-09-2010 10:22 AM

+1 BA Astina passenger bracket for me.

Got the Mazdaspeed Sport seat for the drivers side at the moment and need these brackets to put in the passenger side seat LOL. Pretty good seats compared to the standard series 3 ones.

Ghoru 15-09-2010 07:07 PM

i will take 2 sets of bg ones please

Rupewrecht 15-10-2010 09:54 AM

Just a heads-up - both drivers and passenger seat brackets for BA Astina are being made in the next 2 weeks, so please indicate your interest to make sure you don't miss out! Limited stocks.

Rupewrecht 16-12-2010 03:05 PM

Quote:

Originally Posted by Rupewrecht (Post 248810)
Just a heads-up - both drivers and passenger seat brackets for BA Astina are being made in the next 2 weeks, so please indicate your interest to make sure you don't miss out! Limited stocks.

...and now in stock, just in time for Christmas! More details to follow.

Buzz_LightYear 16-12-2010 03:15 PM

Quote:

Originally Posted by Rupewrecht (Post 252911)
...and now in stock, just in time for Christmas! More details to follow.

WWWHHOOOOOO.... :rolleyes:

Rupewrecht 16-12-2010 07:49 PM

Now in stock:

Mazdaspeed seat brackets for:

1994-1998 323 BA Astina / CBA Lantis / BA 323F.
1994-1998 323 BH Protegé / BHA Familia / BA Protegé
(2WD only)

- Drivers side and Passenger side available.
- Fits both Hatch/Coupé and Hardtop/Sedan.
- Works with Mazdaspeed Type-F, Type-T and Sports seats.
- Available in pairs (LHS and RHS) or individual sides.
- 8 sets available only (and probably no more after this!).

Price:
- $110 per individual seat (LHS or RHS)
- $210 for a pair (RHS and LHS)

Shipping:
- Australia: $15 for either a single or pair of brackets, Australia-wide.
- International: Please PM for a quote.

The brackets:

http://rupewrecht.com/forsale/fs_ms_...ets_repro2.jpg

http://rupewrecht.com/forsale/fs_ms_...ets_repro2.jpg

A.E 03-06-2011 10:22 PM

Have you spotted a set on the auctions for BJ yet??

Rupewrecht 04-06-2011 07:42 AM

Quote:

Originally Posted by A.E (Post 263049)
Have you spotted a set on the auctions for BJ yet??

They don't exist for BJ - they were never made by Mazdaspeed.

scott b 05-06-2011 08:56 PM

that doesnt mean we cant make AGT ones :P

Rupewrecht 24-06-2011 10:02 AM

OK, prototypes are currently being made for NA/NB MX-5, thanks to Scott B / SJB Engineering :)

Both Drivers/RHS and LHS/Passenger brackets will be made. Please indicate your interest! Projected cost is around $98 per side, or $190 for a set of both sides.

Born_Disturbed 07-07-2011 03:42 PM

Hey rupe, i would need 2 out of the 4 NA P/S mounts as i have the other 2, also any chance of some BG 4WD mounts? fair bit of intrest this side of things if its possible

Rupewrecht 07-07-2011 03:48 PM

Quote:

Originally Posted by Born_Disturbed (Post 265542)
Hey rupe, i would need 2 out of the 4 NA P/S mounts as i have the other 2, also any chance of some BG 4WD mounts? fair bit of intrest this side of things if its possible

You'd have to buy a passenger side set, as otherwise i'm left with 2 useless ones ;)

As for BG, i've got a set of BG FWD ones that might be done one day, but i don't know if there's really demand for them. I've never seen any for BG 4WD, so they'd have to be mocked up/CADed and made - but it's possible. Would really need some firm interest for either of the BG ones though.


All times are GMT +10. The time now is 04:04 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
2001- 2010 AstinaGT