AstinaGT Forums - View Single Post - The Project-R Lantis

project.r.racing · 19-01-2010, 11:13 AM

camber issues arrose with the current setup. using -0.5 allowed the 2-3mm clearance (on the rears). i do not wanna run any less camber. fronts will be fine, it's just the rears with these wide rims that is the problem.

current wheels are .5" wide with +42mm offset. so i might look for some +40mm as suggested. the MS-01Rs will fit without a problem.

19-01-2010, 11:13 AM	#80
project.r.racing Senior Member Join Date: Sep 2004 Location: n/a Car: n/a Posts: 10,929	camber issues arrose with the current setup. using -0.5 allowed the 2-3mm clearance (on the rears). i do not wanna run any less camber. fronts will be fine, it's just the rears with these wide rims that is the problem. current wheels are .5" wide with +42mm offset. so i might look for some +40mm as suggested. the MS-01Rs will fit without a problem. Last edited by project.r.racing; 19-01-2010 at 11:17 AM.