Quote:
Originally Posted by sikwitit
ok quick question all we need is the mazda 6 calipers pads and discs and it swaps straight over im just looking to upgrade the front brakes
|
Yep, calipers with brackets, rotors pads. That is for the front.
As per my build thread... Stock bolts are all ok (same thread types and lengths).
Stock lines are the same thread type and size... So they are ok to use... However... As the caliper sits much further away from the hub they will not clip back into the strut mount point (that's on the 300mm rotor - which is the preset Mazda 6 size)
Should fit into the clip if you go the 282 or273mm rotor.
I just used 3 large (thick) cable ties per side. So they are attached to the exact same point. But just on the outside of the mount.