View Single Post
Old 14-01-2012, 07:20 AM   #4
JDM323
Senior Member
 
JDM323's Avatar
 
Join Date: May 2011
Location: North Qld
Car: 2002 BJ2 protege
Posts: 1,241
Send a message via ICQ to JDM323
then came the time to retrofit the morimoto mini d2s projectors that had alredy been purchased http://www.theretrofitsource.com/pro...roducts_id=236
the h4 locators on the factory reflector had to be trimmed with a dremel as they are on an angle from factory, the projectors were then fitted, headlight re-assembled without front lens and fitted to the car for rotational alignment, once the cut offs were level the h4 adapter rings were bonded into place using an industrial 2 part adhesive designed for plastics.

i lightly tinted the indicator lens then the lights then went back into a 70 degree celcius oven for 10 minutes to re seal the front lens.
once done they were re fitted and the wiring finished
JDM323 is offline   Reply With Quote