View Single Post
Old 10-11-2013, 05:57 PM   #1535
Rupewrecht
Administrator
 
Rupewrecht's Avatar
 
Join Date: Mar 2002
Location: melb.vic.au
Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle
Posts: 16,525
Just Added: 10/11/13


A set of Mazdaspeed MS-01S in 16x7 +33 4x100. Made by Rays Engineering, and a forged monoblock wheel - which means very light (~5.5kg) and very strong. Good condition, the paint has a few blemishes but they're still quite presentable. Tyres are Dunlop LeMans LM702 with 4-5mm of tread. Crazy rare - i know of only one other set in Australia (i i brought those in too!)
AUD$SOLD





A set of Mazdaspeed MS-01R, in 15x7 +35 4x100. Pretty good condition overall - one tiny bit of rash on one lip as pictured, some crazing in the anodised finish on the silver lips (which is pretty common after 20+ years) and the faces are in great condition. Tyres are Brigestone Potenza GIII in 195/50R15 with plenty of tread. And they're complete with centre caps and covers, which is unusual after all this time.
AUD$780





A set of Mazdaspeed MS-01S, sized in 15x6.5 +35 4x100. A forged monoblock wheel made by Rays Engineering - at 5.3kg ea they're just as light and strong as a TE37 or CE28N. Finished in white and in almost perfect condition, with the Rays and Mazdaspeed stickers intact, plus Rays carbon centre caps. Tyres are Yokohama DNA S-Drive in 195/50 R15 wih 5mm tread.
AUD$SOLD





A set of Mazdaspeed Aero Disc wheels in 14x6 +40 4x114.3. The only set of Mazdaspeed wheels to ever be released in 4x114.3! Designed to fit the GC 626/Capella and BF 323/Familia. Good condition, but would need some small bends and a repaint to be perfect. Comes with the optional centre caps. Probably the only set you'll ever see for sale - period. Want early-mid '80s period-correct? This is it.
AUD$526





A set of Mazdaspeed MS-01S - perfect for FC & FD RX-7. Anodised/machined lips, with gold centres. Sizing is 17x8.5 +40 and 17x9.5 +38, in 5x114.3. Forged monoblock wheels, made by Rays Engineering - super light! Great condition, with only 2 spots of light rash on one wheel that'd be easy to clean up. Tyres are Yokohama DNA S-Drive in 235/45R17 & 255/40R17 with about 5mm of tread. (I can even make these a full set of 17x8.5 if that's what you need).
AUD$SOLD





A set of Mazdaspeed MS-01S, sized in 15x6.5 +35 4x100. A forged monoblock wheel made by Rays Engineering - at 5.3kg ea they're just as light and strong as a TE37 or CE28N. Finished in Bronze and in great condition apart from some minor gutter rash as pictured. Tyres are Yokohama Advan Neova AD07 in 195/50 R15 with 4-6mm tread.
$SOLD





A set of Mazdaspeed MS-01R wheels, in the only size they came in - 15x7 +35 4x100. Gold faces, anodised lips. In good condition, with a few small marks on the lips and faces as pictured, and some crazing in the clearcoat on the lips. OEM fitment for the NA MX-5, but will suit pretty much any 4x100 car.
AUD$SOLD





A set of Mazdaspeed 747 in 14x6 +45 4x100. Designed for the NA MX-5 before the MS-01R was released, and standard fitment on the Mazdaspeed Type-B BG Familia. Very rare, finished in dark gunmetal centres with polished lips. Good condition, but the lips could use a polish to be perfect.
AUD$492





A set of bronze Mazdaspeed MS-01S is sized in 17x8.5 with a +40 offset and in 5x114.3 stud pattern. Perfect for FWD or 4WD. They're a one-piece forged wheel, made by Rays Engineering - the same construction and lightweight as TE37s and LM GT4s. This set has a little gutter rash but otherwise in good condition. Very hard to find as a non-staggered set - usually these are paired with 17x9.5 +38s.
$SOLD

__________________

jdmparts.rupewrecht.com
Sourcing your not-quite-overnight parts from Japan

WRECHT--|--SLOWTEGE--|--BEETLE--|--SUBSTITUTE--|--AZ-1



Last edited by Rupewrecht; 08-04-2014 at 10:52 AM.
Rupewrecht is offline   Reply With Quote