View Single Post
Old 24-08-2003, 11:09 PM   #2
Mr MX6
Junior Member
 
Mr MX6's Avatar
 
Join Date: Nov 2002
Location: Perth Western Australia
Posts: 87
Send a message via Yahoo to Mr MX6
I just had a closer look @ the Astana..
I found the ecu sockets to be the same but different to the mx6 one..

323 ecu


mx6 ecu


There was an extra unused socket on the kf ecu , but the remaining 3 went in perfectly to the o3s ecu, (I hope the pins are the same..)

The problem I think is going to be the VAF/MAF.. Who knows any thing about this?
You see the maf on the 323 has 4 wires just like the VAf setup on the mx6, but they are different colors and have a different plug on the end.. does any one know if all I have to do is splice the o3 s plug onto the other (I have a spare) and if so what is the color code/mach up?



Or do you think im going to have to get a MX6 loom and swap it all over; including the dizzy (the dizzy is different as well)

and yea, it was night time so gi-me a break on the pics.. :lol:
__________________
Mazda V6s rock!
Mr MX6 is offline   Reply With Quote