View Single Post
Old 15-05-2020, 04:16 PM   #1
danu91
Junior Member
 
Join Date: Jun 2019
Location: Bangkok
Car: Astina BA 1994 + Lancer Cedia 2003
Posts: 26
Question Performance cam for Astina BA (BP 1800)

Hey Guys,

I've rebuilt a 1993 Astina BA 1800cc. (rebuilt at 375,000KM due to low compression)

I've swapped pistons from a 10.5:1 MX5 and done a full 2.5" exhaust as well. Installed a HKS F-Con pro 3.24 and it made 130 WHP at Dynojet. (also upgraded fuel pump and injectors)

Then I've installed a 4AGE black-top ITB and did a re-tune and it made 138WHP. I know it's not a lot of power but hell a lot of fun to drive.

I'm thinking of keeping it NA as long as possible. So I believe my next upgrade should be cams... I've looked around and so far only found $800++ camshaft sets (without springs etc) from MX-5 NA8C.

What do you guys recommend ? I'm not necessary looking for a crazy amount of power but something a bit more would be nice.

Thanks in advance.

Here's my dyno results after ITB

Last edited by danu91; 15-05-2020 at 04:19 PM.
danu91 is offline   Reply With Quote
Sponsored Links