AstinaGT Forums - View Single Post - ABOUT: KFZE-KLDE swap in a BA 323

JynX · 10-09-2003, 12:15 AM

Look very similar. 1 line to the EGRPS and TPS, 1 intake temp, 1 flow sensor and 2 grounds.

Check the resitance produced by both the MAF and VAF - if that checks out to be the same then you should be able to splice the MAF wiring into the VAF plug.

10-09-2003, 12:15 AM	#22
JynX Senior Member Join Date: Dec 2002 Location: Sydney Posts: 1,767	Look very similar. 1 line to the EGRPS and TPS, 1 intake temp, 1 flow sensor and 2 grounds. Check the resitance produced by both the MAF and VAF - if that checks out to be the same then you should be able to splice the MAF wiring into the VAF plug. __________________ JynX 1994 Turbo BA Astina 200whp @ 12psi "If you cant drive fast with 90hp..... 900hp wont help you"