View Single Post
Old 05-10-2011, 09:29 PM   #63
phildough
Banned
 
Join Date: May 2006
Location: Brisneyland, Queensland
Car: 2002 Mazda Frankenstina
Posts: 2,868
I agree with what the others have said.
Im not a mechanic im a computer technician. but I have good general mechanical and electrical knowledge.
The only thing I can think that we did diferently other than use a FS-ZE was that I also used the FS-ZE MAF with the FP-DE ECU.
I had problems as my ECU was faulty and wouldn't kick the VICS over so I made my own controller and everything worked perfectly, other than running a little rich my FP ECU ran my car beautifully.
I have no clue as to why my car is different to yours.
If you have the FS-DE ECU loom and ECU it has to be possible to get it working, it should also be possible to get the car running with the FS-DE ECU and FP loom, it will require a little fiddling with wires and such but it is possible and with maztechs help im sure its possible, I found the wiring diagrams so it must be possible to do it.
phildough is offline   Reply With Quote