Well... its been many moons since logging onto the old AGT forum
Now at 90k km's and no longer a daily driver.
Have considered selling it many times for something in the likes of a 370z or S2 lotus Elise with 2zz motor. But can bring myself to it.
so here is the current mods list of my supposed to be 'Stock' MPS.
I also have a spare engine at home ready to start building (wet sleeves, carillo rods, 10.6:1 90mm pistons, then new turbo/manifold set up etc. but that is a while away)
Plenty of stuff left out I'm sure...
Will update some pics over the weekend
Engine:
BNR S3 turbo – installed at 85k km’s – HPC coat turbine housing, powder coat compressor housing
Kozmic Braided oil feed line
2xs HPC coated Exhaust manifold
2xs HPC coated Split Dump pipe
High flow Cat (Or ‘test pipe’ cat delete removable section)
2xs 3” resonated mid-section
HKS Legamax Premium Rear Muffler (titanium Tips) (Thanks Rupe)
JBR 3” one piece silicone Intake
ATP 3” MAF housing,
Modified Corksport airbox (to suit JBR intake
ECU relocation (front of battery)
Percision Front mount Intercooler
HTP Under routed Hot side IC piping (clocked turbo to suit)
Cobb Cold side IC piping
HKS SSQV v4 CPE kit
Throttle body Coolant Bypass
Thermal Insulated gaskets for Throttle body and Intake manifold
Port Matched and polished powdercoated intake manifold with VTCS delete
- Soon to arrive JMF billett/sheet intake manifold.
Kozmic Full (primary and secondary) EGR delete
Autotech HPFP internals
Coil Pack and HPFP harness Wire tuck
RD motorsorts coilpack and HPFP covers
Cpe injector seal kit (not installed, but will supply or install prior to sale)
Dammond motorsports Engine and transmission mounts
JBR stage 2 Catch can with Check valve
14Row External thermostatic oil cooler
DCR VVT actuator (fitted with full timing chain Kit from edge)
Accessport V2 for tuning
Handling:
Bilstein B8 shocks
Eibach Pro Springs
Whiteline Front Swaybar
JBR Rear swaybar
Autoexe Front LCA brace
Autoexe Front Strut tower Brace
Autoexe Rear subframe Brace
Autoexe Rear Floor (boot floor under carpet) brace
Whiteline LCA bushings with Extra caster for the front LCA rear bushing
Whiteline Bump steer correction kit
Michelin PS3 235/40/R18
2xs Rear Toe links
SPC Rear Camber arms
RDA front and rear slotted/dimpled rotors
EBC Yellow Stuff Brake pads (front and rear)
A1 stainless braided brake lines (DOT approved)
Motul RBF 600 brake fluid (full flush ever 12months)
Transmission:
ACT 6 puck ceramic clutch (sprung disk)
ACT ‘Streetlite’ singlemass flywheel
Corksport Short Shift Plate and weight
Sure motorsports Heavy stainless shift knob
Interior:
Redline leather goods arm rest cover
Redline leather goods shifter boot
Redline leather goods handbrake boot cover
Eonon GM5163 android headunit
Alpine under seat subwoofer
Prosport Boost and oil temp gauge
Dual gauge vent pod
Dynamatt extreme applied to trunk, under rear seat, roof, boot lid and both skins of all doors.
Car builders acoustic foam liner applied over all dynamatted areas.
Exterior:
Work 11r 18x8.5 +38 wheels (Thanks Rupe)
Work wheel Decal Kit (Thanks Rupe)
Work Centercaps (Thanks Rupe)
Work Wheel nuts
Genuine Autoexe Front bumper bar
Opticoat Pro + Applied with full paint correction by TopNotch Car Care
Custom Quad HID projector Headlights (morrimoto parts from TRS)
Morrimoto LED Projector Foglights