|
|
Register | Readers Rides | Gallery | FAQ | Members List | Social Groups | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Display Modes |
30-05-2014, 11:15 AM | #1 |
obsessed-incomplete-broke
Join Date: Oct 2008
Location: Brisbane
Car: BA Hardtop/Hatch
Posts: 5,441
|
FOR SALE [QLD] HUGE BG and BA parts sale BPT LSD Gboxes etc
Alrighty. I cannot walk downstairs there's too much stuff and about to strip another BG.
Parts for BA 4 G series gearboxes all done between 150-280Kms. all came from working cars. have some spare shafts and G series flywheels to suit, or a lighter MX5 NA6 one! $200 Wiring looms for connectors etc. $free if buying other stuff or a few dollars for postage/effort. Airbag module $5 to blow up series 3 black door cards. have some extras. $15 each V6 Hubs, calipers and rotors $400 v6 Rims in good condition with legal tread $150 Indicator/wiper stalks x2 $25 Scratched and dented noble green hatch bonnet $40 BG Parts JDM BPT 90-100K with only minor oil leak from oil pan. Very nice motor, smooth and revs nicely. had an easy life on 12PSI. currently running wategate 9psi and has done for ages. wideband indicates good operation. Welcome to test drive TODAY OR TOMORROW ONLY. as a whole package with AFM, dizzy, wrinkle black intake manifold, 5 puk clutch and g series flywheel, coil, wiring, jap spec ecu, my VF10 setup which derb built and hasnt been run yet, 2.5" dump and various piping. can split up but would like to see this in another forum members car complete. can help with transport and whatnot. New spark plugs, leads, dizzy rotor button installed this week. $1300 G series box less than 150K, change the input shaft seals when swapping and itll be a nice box. $200. As new dizzy, replaced cap and rotor button with genuine mazda items for my built motor. no longer req. $50 Genuine mazda coil, paid big $ for genuine, as new no longer required. $120 Magnacore red leads $120 Factory alloys with legal tread. very good condition, minor scratches on covers: $150 Front aftermarket swaybar: $200 carpet, VGC $50 Hoodlining VGC $30 Seats VGC small wear on drivers bolster. $200 for front+rear A pillars one cracked at the top, the other slightly scratched. very hard to find in this condition, if at all. $75 154K cluster all works properly, $75 UNCRACKED dash $100 Doors $50 each (have missing plastic for drivers door)
__________________
Worklog Last edited by Clean_Cookie; 23-06-2014 at 08:15 PM. |
Sponsored Links |
30-05-2014, 11:45 AM | #2 |
obsessed-incomplete-broke
Join Date: Oct 2008
Location: Brisbane
Car: BA Hardtop/Hatch
Posts: 5,441
|
A\C setup $100
power steering pumps $20 Alternators $50 Front indicators/parkers $25 Tail Lights $50 Tail gate $80 Rear garnish $50 QTR panels $40 Front bar $100 Rear bar $80 Bonnet $80 Headlights $30 each Completely working sunroof in VGC, factory key supplied for manual operation. tiny spot of surface rust as shown. White is from polisher and rubs off $offer Auto 2 core radiator $75 Lowered suspension $150 Front strut brace $50 Rear CUSCO strut brace $100 QFM A1rm front pads and HPX rear sold BPD motor with forged ACL pistons 50 thou oversize, GTR Rods etc. Suit parts for new BP motor build. short block only. has recent Gates racing timing belt. $500 Random bits ALL Models: MAzdaspeed LSD. Locks up well, comes with custom shafts to suit BG SOLD Turbosmart Superstreet FPR $100 Autometer Fuel pressure guage $50 GFB Stealth FX BOV $250 PLX Wideband with touchscreen $150 info here http://www.plxdevices.com/product_in...DBDSMAFR_DM6G3 15x7 MS01-R +35 one has slight buckle. otherwise decent condition. have been painted black previously. $500 Don't like a price, something not listed, have no money but want something? Just ask. I need to clear this quickly but deposits can be put down for big dollar stuff.
__________________
Worklog Last edited by Clean_Cookie; 23-06-2014 at 08:13 PM. |
31-05-2014, 07:00 PM | #3 |
Junior Member
|
Do you still have the hubs man?
__________________
|
01-06-2014, 02:15 PM | #4 |
obsessed-incomplete-broke
Join Date: Oct 2008
Location: Brisbane
Car: BA Hardtop/Hatch
Posts: 5,441
|
I'm assuming you're Daniel.
Parts on hold pending payment: v6 hubs, brake lines Parts sold: rear sway bar, brake rotors and dash cluster surround, front door trims. Also adding: short shift $55 and eunos leather gear boot $10
__________________
Worklog |
01-06-2014, 02:49 PM | #5 |
Senior Member
|
That short shifter felt better than my current one. Good to see its available now.
__________________
|
11-06-2014, 09:38 PM | #7 |
Senior Member
Join Date: Sep 2011
Location: north coast nsw
Car: 97 ba 1.8 323
Posts: 799
|
I'll grab a bg alternator, the blue cam cover and the autometer fuel pressure guage off you, the turbo motor is tempting....itbs plus turbo.mmmm.
Payment on friday if its a go. I might need the cam gear cover backing plate to use that cover too? Last edited by ghetto3; 11-06-2014 at 10:23 PM. |
12-06-2014, 10:41 AM | #9 |
Senior Member
Join Date: Sep 2004
Location: n/a
Car: n/a
Posts: 10,929
|
dont happen to have a 95-98 f series drivers side axle do you in goodish condition?
just did an oil change and found the inner boot had cracked. what a greasy mess. |
13-06-2014, 03:41 AM | #11 |
Junior Member
Join Date: Nov 2012
Location: Beenleigh
Car: Red KF laser TX3, BPT FWD
Posts: 4
|
Hey, chasing pair front trailing arms for bg/ba, pair front disc rotors (any condition) and an engine bay loom for bg?
Last edited by MTXLaser; 13-06-2014 at 03:44 AM. |
13-06-2014, 08:33 PM | #13 |
Senior Member
Join Date: Sep 2011
Location: north coast nsw
Car: 97 ba 1.8 323
Posts: 799
|
I just realized that was the passenger side shaft you took up with you. I have a drivers one somewhere that I'll have to bring up one day. Sorry mate.
|
17-06-2014, 02:27 PM | #14 |
Junior Member
Join Date: Mar 2005
Location: Central Coast
Car: KH Turbo Laser
Posts: 201
|
Remember the Maruha Motors Adjustable cam gears too that are on that BP motor
__________________
BG SP Wedge + BPD + GT2871RS + adjustable cam gears + FMIC + 3" exhaust+ Haltech sp1000 + BPD injectors + Walbro GSS342 + LSD + Par straight cut 3rd + custom shafts + upgraded brakes + suspension + tints + doof = |
23-06-2014, 08:17 PM | #15 |
obsessed-incomplete-broke
Join Date: Oct 2008
Location: Brisbane
Car: BA Hardtop/Hatch
Posts: 5,441
|
Heaps of stuff sitting here still, come grab a Bargain and a chat. Now secured a full time job but home early most afternoons. Can post/courier but if it needs dropping off at depot it won't happen the next day unless urgent. Thanks!
__________________
Worklog |
13-07-2014, 05:01 PM | #17 |
Junior Member
Join Date: Jul 2014
Location: coffs hafbour, australia
Car: 95 BA 323 protege
Posts: 14
|
did you say you had a LSD and would it fit a bp gearbox
|
13-07-2014, 05:21 PM | #18 |
Senior Member
Join Date: Sep 2004
Location: n/a
Car: n/a
Posts: 10,929
|
|
13-07-2014, 05:58 PM | #19 |
Senior Member
Join Date: Jan 2012
Location: Beachmere
Car: 1997 BA "The Red Baron"
Posts: 704
|
i think the one he was selling i bought
__________________
The Red Baron Roses are Red Violets are Blue My Madza 323 Goes... SSSSSSSSTUUTUUTUU |
14-07-2014, 07:27 PM | #20 |
Junior Member
Join Date: Jul 2014
Location: coffs hafbour, australia
Car: 95 BA 323 protege
Posts: 14
|
sorry guys excuse my ignorance , i was looking for one for my ba 323 protege and i'm not familiar with different g/box types fitted to this model
|
Thread Tools | |
Display Modes | |
|
|