HELP WITH WIRE COLOURS FOR SPEAKERS IN SP20

OLD-13H · 02-12-2003, 02:14 PM

Hi People,

Well I got me SP20.
I want to hook up my Rockford box to the standard deck.
Now I have and amp and I only want to amplify the Box, the font speakers will remain originally powered by the deck.

Now the way I want to do this is to disconnect the rear door speakers and extend that wiring to run to the boot .This will then hook up to the high inputs of my amp.

The car is a Brand Spanker and I really don't want to start ripping **** apart.

My question is can someone tell me what colour the speaker wires are that go into the back doors, as I will disconnect these from under the "B" Pillar of the .This will be easier than ripping the door drim off and pulling the plug than hides all the wiring between the door off.

Can someone help me with this.

I'm hanging to get that box thumping again.

Regs OLD-13H

OLD-13H · 05-12-2003, 04:32 PM

Come on people,some must know or can help.

Pleeeeeeeeeeeeeaaaaaaaaaaassssssseeeeee

CityEnd · 05-12-2003, 04:50 PM

sorry mate,

i have a 95 model don't know if it is the same wiring colours, but if it is, then the colours are:

-RL= yellow
+RL= orange

-RR= green/orange stripe
+RR= green/black stripe

lets hope it's the same

SP:KING · 07-12-2003, 09:29 PM

Mate the colours are:

Front.
L+ black/brown
L- black/white
R+ red
R- white

Rear
L+ brown/white
L- brown
R+ green
R- green/orange

Ground - Black.

All the best Marty.

OLD-13H · 09-12-2003, 08:12 AM

Thanks guys,

You are both legends.

Regs OLD-13H

02-12-2003, 02:14 PM	#1
OLD-13H Junior Member Join Date: Nov 2003 Location: Sydney Posts: 11	HELP WITH WIRE COLOURS FOR SPEAKERS IN SP20 Hi People, Well I got me SP20. I want to hook up my Rockford box to the standard deck. Now I have and amp and I only want to amplify the Box, the font speakers will remain originally powered by the deck. Now the way I want to do this is to disconnect the rear door speakers and extend that wiring to run to the boot .This will then hook up to the high inputs of my amp. The car is a Brand Spanker and I really don't want to start ripping **** apart. My question is can someone tell me what colour the speaker wires are that go into the back doors, as I will disconnect these from under the "B" Pillar of the .This will be easier than ripping the door drim off and pulling the plug than hides all the wiring between the door off. Can someone help me with this. I'm hanging to get that box thumping again. Regs OLD-13H __________________ OLD SKOOL www.users.bigpond.com/saam.val

05-12-2003, 04:32 PM	#2
OLD-13H Junior Member Join Date: Nov 2003 Location: Sydney Posts: 11	Come on people,some must know or can help. Pleeeeeeeeeeeeeaaaaaaaaaaassssssseeeeee __________________ OLD SKOOL www.users.bigpond.com/saam.val

09-12-2003, 08:12 AM	#5
OLD-13H Junior Member Join Date: Nov 2003 Location: Sydney Posts: 11	Thanks guys, You are both legends. Regs OLD-13H __________________ OLD SKOOL www.users.bigpond.com/saam.val

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SP20 VSS wire	Ken_1977	Interior & Electrics	6	24-07-2006 09:32 PM
Just replaced some speaker wire :S	andrewgrazier	Audio Hi-fi	8	29-01-2005 01:03 AM
dba brake rotors - sp20	twilightprotege	Performance & General Maintenance	50	23-08-2004 02:38 PM
SP20 VS SP23	WASP20	General Automotive Talk	10	16-03-2004 12:38 AM
sp20 bits + sports exhaust	dfvadr	Bodykits & Exterior	4	05-10-2003 12:17 AM

05-12-2003, 04:50 PM	#3
CityEnd Senior Member Join Date: Jul 2002 Location: Melbourne Car: . Posts: 915	sorry mate, i have a 95 model don't know if it is the same wiring colours, but if it is, then the colours are: -RL= yellow +RL= orange -RR= green/orange stripe +RR= green/black stripe lets hope it's the same

07-12-2003, 09:29 PM	#4
SP:KING Junior Member Join Date: Nov 2003 Location: NSW Car: SP20 Posts: 214	Mate the colours are: Front. L+ black/brown L- black/white R+ red R- white Rear L+ brown/white L- brown R+ green R- green/orange Ground - Black. All the best Marty.