The New Beasty - The Red Baron - Page 2

BrownDog · 20-05-2014, 04:36 PM

yes will work my ass off to keep it, hopefully can start making a decent car now.

Bought a full VRS Kit of ebay

project.r.racing · 20-05-2014, 05:18 PM

coolies.

gimme a yell if yu need a hand with it.

try not to put a motor through the windscreen this time too.

BrownDog · 20-05-2014, 05:23 PM

Yeah might need a hand when it comes to redoing the head and putting it into the new one, gonna keep driving the blue one to work, putting the motor from my aunts BG in the new one and get it rego'd, then over a weekend pull the motor from the blue one, mix up parts between it and the good block, drop it in the red one and drive the red one

Hahaha yeah not making the mistake again

BrownDog · 02-06-2014, 11:30 AM

Ok so blue is sold, being collected this weekend, motor And box is out, spares about to go in, pulled the cruise control, alarm and various things I want, stereo is coming out through the week.

Waiting for VRS kit to come and buying a LSD from Cookie so gonna drop that in aswell, also getting the other two 18" wheels I'm missing

BrownDog · 05-06-2014, 07:53 PM

YIPEEE!! it came. so many pieces, dont know where half of it goes haha

anyone care to help, these are the things i know are there:
Head gasket
intake and exhuast gaskets
tb
valve stem seals
tappet gasket
rear main seal
thermostat gasket
water pump gasket

anyone know what else is there

project.r.racing · 05-06-2014, 08:10 PM

half of it you wont use.

these kits are designed for various models ranging alot of years and various models.

i can see 2 bg throttle body seals in there. a vvt intake camshaft seal. a bg egc seal just to name a few.

BrownDog · 05-06-2014, 08:13 PM

i wanna know what the 8 copper washers and the oval rubber rings are for

project.r.racing · 05-06-2014, 08:21 PM

can you take a closer photo of those?

or link me to the ebay kit your brought?

BrownDog · 05-06-2014, 08:50 PM

i wanna know what these are mostly

heres the link:
http://www.ebay.com.au/itm/200909663...84.m1439.l2649

also orderd a RPM clutch kit from clutch indus

project.r.racing · 05-06-2014, 09:28 PM

the 2 washers that are different from the eight are your sump bolt washers. one 14mm and the other 18mm. you'll only use the correct one.

no idea on the 8 washers.

the plate with 2 circles is you iac to throttle one for 96-98 323s/98-03 mx5s.

the figure of 8 one is the bg part i said you wont use. got on the front of intake manis for bgs/familias.

the the thing that looks like a moon is a mmon seal. goes between crank and sump. again probably give 2 different versions. will only use one version.

project.r.racing · 05-06-2014, 09:38 PM

wehn through the 94-98 B6/BP workshop manual. those 8 washers dont exsist anywhere in it.

Clean_Cookie · 05-06-2014, 11:03 PM

I was thinking they look like the ones used on the banjo Fitting for oil feed for turbo? Also if you're not using it I'll take the bg intake manifold seal if it's the same as the turbo manifold. Destroyed my brand new one today removing the throttle body

project.r.racing · 06-06-2014, 07:26 AM

Quote:

Originally Posted by Clean_Cookie

I was thinking they look like the ones used on the banjo Fitting for oil feed for turbo? Also if you're not using it I'll take the bg intake manifold seal if it's the same as the turbo manifold. Destroyed my brand new one today removing the throttle body

yes its the same.

Clean_Cookie · 06-06-2014, 07:32 AM

Sweet. Swap you for an lsd and a little less cash my way.

BrownDog · 06-06-2014, 07:46 AM

Done, I'll bring em all with when I come round to drop off some cash and you can grab anything else I won't need,

I was thinking the 8 washers may go on the head bolts to compensate for the stretching, so I don't have to buy new bolts, or am I crazy

There is 4 of the moon things so probly 4 different versions

BrownDog · 06-06-2014, 07:47 AM

Hmm there could be some turbo stuff on there, as it the kit is also for BPTs and BPDs

project.r.racing · 06-06-2014, 12:16 PM

you have more than 8 head bolt.

BrownDog · 06-06-2014, 02:12 PM

Sorry forgot to mention I counted wrong, there's more than 8, I'll have to get them out of the packet and get a final tally

project.r.racing · 06-06-2014, 03:29 PM

there is 8 in the photo from the ebay link

BrownDog · 09-06-2014, 06:00 PM

still havent counted em yet.

in other news the blue POS is gone and all attention is to the new one

what i need:
a new radiator
a front bar indicator
strut tops

to do list:
build working motor
build LSD gearbox
fix window bushes
install stereo, cruise control, alarm
fit HID kit
install antenna

CLEAN THE BASTARD and a good polish

20-05-2014, 04:36 PM	#21
BrownDog Senior Member Join Date: Jan 2012 Location: Beachmere Car: 1997 BA "The Red Baron" Posts: 704	yes will work my ass off to keep it, hopefully can start making a decent car now. Bought a full VRS Kit of ebay __________________ The Red Baron Roses are Red Violets are Blue My Madza 323 Goes... SSSSSSSSTUUTUUTUU

20-05-2014, 05:23 PM	#23
BrownDog Senior Member Join Date: Jan 2012 Location: Beachmere Car: 1997 BA "The Red Baron" Posts: 704	Yeah might need a hand when it comes to redoing the head and putting it into the new one, gonna keep driving the blue one to work, putting the motor from my aunts BG in the new one and get it rego'd, then over a weekend pull the motor from the blue one, mix up parts between it and the good block, drop it in the red one and drive the red one Hahaha yeah not making the mistake again __________________ The Red Baron Roses are Red Violets are Blue My Madza 323 Goes... SSSSSSSSTUUTUUTUU

02-06-2014, 11:30 AM	#24
BrownDog Senior Member Join Date: Jan 2012 Location: Beachmere Car: 1997 BA "The Red Baron" Posts: 704	Ok so blue is sold, being collected this weekend, motor And box is out, spares about to go in, pulled the cruise control, alarm and various things I want, stereo is coming out through the week. Waiting for VRS kit to come and buying a LSD from Cookie so gonna drop that in aswell, also getting the other two 18" wheels I'm missing __________________ The Red Baron Roses are Red Violets are Blue My Madza 323 Goes... SSSSSSSSTUUTUUTUU

05-06-2014, 07:53 PM	#25
BrownDog Senior Member Join Date: Jan 2012 Location: Beachmere Car: 1997 BA "The Red Baron" Posts: 704	YIPEEE!! it came. so many pieces, dont know where half of it goes haha anyone care to help, these are the things i know are there: Head gasket intake and exhuast gaskets tb valve stem seals tappet gasket rear main seal thermostat gasket water pump gasket anyone know what else is there __________________ The Red Baron Roses are Red Violets are Blue My Madza 323 Goes... SSSSSSSSTUUTUUTUU

05-06-2014, 08:13 PM	#27
BrownDog Senior Member Join Date: Jan 2012 Location: Beachmere Car: 1997 BA "The Red Baron" Posts: 704	i wanna know what the 8 copper washers and the oval rubber rings are for __________________ The Red Baron Roses are Red Violets are Blue My Madza 323 Goes... SSSSSSSSTUUTUUTUU

20-05-2014, 05:18 PM	#22
project.r.racing Senior Member Join Date: Sep 2004 Location: n/a Car: n/a Posts: 10,929	coolies. gimme a yell if yu need a hand with it. try not to put a motor through the windscreen this time too.

05-06-2014, 08:10 PM	#26
project.r.racing Senior Member Join Date: Sep 2004 Location: n/a Car: n/a Posts: 10,929	half of it you wont use. these kits are designed for various models ranging alot of years and various models. i can see 2 bg throttle body seals in there. a vvt intake camshaft seal. a bg egc seal just to name a few.

05-06-2014, 08:21 PM	#28
project.r.racing Senior Member Join Date: Sep 2004 Location: n/a Car: n/a Posts: 10,929	can you take a closer photo of those? or link me to the ebay kit your brought?

05-06-2014, 08:50 PM	#29
BrownDog Senior Member Join Date: Jan 2012 Location: Beachmere Car: 1997 BA "The Red Baron" Posts: 704	i wanna know what these are mostly heres the link: http://www.ebay.com.au/itm/200909663...84.m1439.l2649 also orderd a RPM clutch kit from clutch indus __________________ The Red Baron Roses are Red Violets are Blue My Madza 323 Goes... SSSSSSSSTUUTUUTUU

05-06-2014, 09:28 PM	#30
project.r.racing Senior Member Join Date: Sep 2004 Location: n/a Car: n/a Posts: 10,929	the 2 washers that are different from the eight are your sump bolt washers. one 14mm and the other 18mm. you'll only use the correct one. no idea on the 8 washers. the plate with 2 circles is you iac to throttle one for 96-98 323s/98-03 mx5s. the figure of 8 one is the bg part i said you wont use. got on the front of intake manis for bgs/familias. the the thing that looks like a moon is a mmon seal. goes between crank and sump. again probably give 2 different versions. will only use one version.

05-06-2014, 09:38 PM	#31
project.r.racing Senior Member Join Date: Sep 2004 Location: n/a Car: n/a Posts: 10,929	wehn through the 94-98 B6/BP workshop manual. those 8 washers dont exsist anywhere in it.

05-06-2014, 11:03 PM	#32
Clean_Cookie obsessed-incomplete-broke Join Date: Oct 2008 Location: Brisbane Car: BA Hardtop/Hatch Posts: 5,441	I was thinking they look like the ones used on the banjo Fitting for oil feed for turbo? Also if you're not using it I'll take the bg intake manifold seal if it's the same as the turbo manifold. Destroyed my brand new one today removing the throttle body __________________ Worklog

06-06-2014, 07:32 AM	#34
Clean_Cookie obsessed-incomplete-broke Join Date: Oct 2008 Location: Brisbane Car: BA Hardtop/Hatch Posts: 5,441	Sweet. Swap you for an lsd and a little less cash my way. __________________ Worklog

06-06-2014, 07:46 AM	#35
BrownDog Senior Member Join Date: Jan 2012 Location: Beachmere Car: 1997 BA "The Red Baron" Posts: 704	Done, I'll bring em all with when I come round to drop off some cash and you can grab anything else I won't need, I was thinking the 8 washers may go on the head bolts to compensate for the stretching, so I don't have to buy new bolts, or am I crazy There is 4 of the moon things so probly 4 different versions __________________ The Red Baron Roses are Red Violets are Blue My Madza 323 Goes... SSSSSSSSTUUTUUTUU

06-06-2014, 07:47 AM	#36
BrownDog Senior Member Join Date: Jan 2012 Location: Beachmere Car: 1997 BA "The Red Baron" Posts: 704	Hmm there could be some turbo stuff on there, as it the kit is also for BPTs and BPDs __________________ The Red Baron Roses are Red Violets are Blue My Madza 323 Goes... SSSSSSSSTUUTUUTUU

06-06-2014, 12:16 PM	#37
project.r.racing Senior Member Join Date: Sep 2004 Location: n/a Car: n/a Posts: 10,929	you have more than 8 head bolt.

06-06-2014, 02:12 PM	#38
BrownDog Senior Member Join Date: Jan 2012 Location: Beachmere Car: 1997 BA "The Red Baron" Posts: 704	Sorry forgot to mention I counted wrong, there's more than 8, I'll have to get them out of the packet and get a final tally __________________ The Red Baron Roses are Red Violets are Blue My Madza 323 Goes... SSSSSSSSTUUTUUTUU

06-06-2014, 03:29 PM	#39
project.r.racing Senior Member Join Date: Sep 2004 Location: n/a Car: n/a Posts: 10,929	there is 8 in the photo from the ebay link

09-06-2014, 06:00 PM	#40
BrownDog Senior Member Join Date: Jan 2012 Location: Beachmere Car: 1997 BA "The Red Baron" Posts: 704	still havent counted em yet. in other news the blue POS is gone and all attention is to the new one what i need: a new radiator a front bar indicator strut tops to do list: build working motor build LSD gearbox fix window bushes install stereo, cruise control, alarm fit HID kit install antenna CLEAN THE BASTARD and a good polish __________________ The Red Baron Roses are Red Violets are Blue My Madza 323 Goes... SSSSSSSSTUUTUUTUU

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode