Go Back   AstinaGT Forums > AstinaGT Talk > Your Rides/Project Worklog

Reply
 
Thread Tools Display Modes
Old 13-01-2012, 08:27 PM   #1
JDM323
Senior Member
 
JDM323's Avatar
 
Join Date: May 2011
Location: North Qld
Car: 2002 BJ2 protege
Posts: 1,241
Send a message via ICQ to JDM323
bjII protege 1.8 tree hugger

been lurking for a while now so guess its build thread time.
we bought a 1 owner protege with 100000km and full service history in late july 2009.
we fitted bravo clear side indicators on the delivery day as they didn't fit our ford(original plan)
all went smoothly until 23/12/2009 protege + tree on tight left hand bend with pea gravel = FAIL


after a 6 hour walk(no reception) we got help and with their cruiser the corner was pulled out enough to get the subframe off the harmonic balancer.
this allowed us to start the car and drive out on park lights at 1.00am, once we got back to the main road our savior went back home and we slept in the car.
at dawn we drove home to survey the damage


the radiator was bent like a banana but didn't leak, condenser and aircon compressor was also killed

Last edited by JDM323; 13-01-2012 at 08:30 PM.
JDM323 is offline   Reply With Quote
Sponsored Links
Old 13-01-2012, 08:46 PM   #2
JDM323
Senior Member
 
JDM323's Avatar
 
Join Date: May 2011
Location: North Qld
Car: 2002 BJ2 protege
Posts: 1,241
Send a message via ICQ to JDM323
so next thing was to remove the damaged parts ready for the panel-beater tocome and check it out

right hand clip was to be replaced(last one in mazda stocks), the radiator support panel, bumper,reinforcing, crush can,bonnet,fender,headlight,radiator,condenser,pow er steering cooling pipe,aircon compressor and both guard liners as the decision had been made to use sp20 bumper.
after almost 12 months of sourcing parts and saving the parts were gathered and the car went off to the panel-beaters.
well doctor do you think you can save this one =)
so the surgery begins


nice kink there
after 7 months between other jobs and some disassembly/reassembly from me i get called to the workshop to find my car in this state

Last edited by JDM323; 13-01-2012 at 09:00 PM.
JDM323 is offline   Reply With Quote
Old 14-01-2012, 06:34 AM   #3
JDM323
Senior Member
 
JDM323's Avatar
 
Join Date: May 2011
Location: North Qld
Car: 2002 BJ2 protege
Posts: 1,241
Send a message via ICQ to JDM323
bjII protege 1.8 tree hugger

trailered the car home to prepare for roadworthy mainly a good clean up and to finally get tyres for the rims that were bought 19/12/2009 but luckily never fitted

stock mx5 16" that got wrapped in 205/50r16 toyo proxes4.
with roadworthy passed and rego paid it was time to chase up the sp20 skirts, rear lip and fog lights.
these were all found and purchased (thank you rupe) the rear lip however was for an astina as no sedan ones around at the time so had to do plastic surgey with a piece of 89 fairlaine bumper.
while washing the car i noticed a puddle under the clutch pedal which turned out to be cracking spot welds so back to the panel-beaters to have these welded up and the skirts, rear lip, tail light housings, headlight garnish+reflectors, stereo surround, shifter/cup holder surround and part of the console in front of the cup holders painted.

Last edited by JDM323; 06-12-2014 at 04:14 PM.
JDM323 is offline   Reply With Quote
Old 14-01-2012, 07:20 AM   #4
JDM323
Senior Member
 
JDM323's Avatar
 
Join Date: May 2011
Location: North Qld
Car: 2002 BJ2 protege
Posts: 1,241
Send a message via ICQ to JDM323
then came the time to retrofit the morimoto mini d2s projectors that had alredy been purchased http://www.theretrofitsource.com/pro...roducts_id=236
the h4 locators on the factory reflector had to be trimmed with a dremel as they are on an angle from factory, the projectors were then fitted, headlight re-assembled without front lens and fitted to the car for rotational alignment, once the cut offs were level the h4 adapter rings were bonded into place using an industrial 2 part adhesive designed for plastics.

i lightly tinted the indicator lens then the lights then went back into a 70 degree celcius oven for 10 minutes to re seal the front lens.
once done they were re fitted and the wiring finished
JDM323 is offline   Reply With Quote
Old 14-01-2012, 07:46 AM   #5
JDM323
Senior Member
 
JDM323's Avatar
 
Join Date: May 2011
Location: North Qld
Car: 2002 BJ2 protege
Posts: 1,241
Send a message via ICQ to JDM323
while the bar was off i fitted 3000k hid's to the fog lights and made a new fog light harness to go directly to the ballasts and ran the wiring on the body and re fitted the bumper using sag fix brackets instead of the nut+bolts i had been fighting with

the tail lights were next for these the chrome rings were routered down as much as practical using jigs made from 38mm chipboard on a cnc machine, the lower lenses were also trimmed down and custom led assemblies fitted, the stop/tail was already led but in the center which was the indicator was fitted with an e-mark reflector the lenses were lightly tinted then the lights were re assembled and fitted to the car, at the same time i fitted led bulbs to the front indicators which required a pin swap on the plugs and load resistors wired in.
the load resistors were fitted in the rear, 2 on each side keeping them out of the engine bay.
from this to this

Last edited by JDM323; 06-12-2014 at 04:17 PM.
JDM323 is offline   Reply With Quote
Old 14-01-2012, 07:52 AM   #6
JDM323
Senior Member
 
JDM323's Avatar
 
Join Date: May 2011
Location: North Qld
Car: 2002 BJ2 protege
Posts: 1,241
Send a message via ICQ to JDM323
some more pictures as it sits now

JDM323 is offline   Reply With Quote
Old 14-01-2012, 08:02 AM   #7
JDM323
Senior Member
 
JDM323's Avatar
 
Join Date: May 2011
Location: North Qld
Car: 2002 BJ2 protege
Posts: 1,241
Send a message via ICQ to JDM323
fitted kn/kq laser wiper stalk then broke the left front inner door handle, got another from the wreckers but it was cracked so i removed the spring from the handle until i get a replacement set.
JDM323 is offline   Reply With Quote
Old 14-01-2012, 11:23 AM   #8
Rupewrecht
Administrator
 
Rupewrecht's Avatar
 
Join Date: Mar 2002
Location: melb.vic.au
Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle
Posts: 16,525
Certainly come a long way!
__________________

jdmparts.rupewrecht.com
Sourcing your not-quite-overnight parts from Japan

WRECHT--|--SLOWTEGE--|--BEETLE--|--SUBSTITUTE--|--AZ-1


Rupewrecht is offline   Reply With Quote
Old 17-01-2012, 06:26 PM   #9
JDM323
Senior Member
 
JDM323's Avatar
 
Join Date: May 2011
Location: North Qld
Car: 2002 BJ2 protege
Posts: 1,241
Send a message via ICQ to JDM323
polished the scratches out of my instrument cluster lens and added some rings

and in the car

Last edited by JDM323; 06-12-2014 at 04:18 PM.
JDM323 is offline   Reply With Quote
Old 17-01-2012, 06:51 PM   #10
Ben
Senior Member
 
Ben's Avatar
 
Join Date: Jun 2011
Location: Sunshine Coast
Car: MPS
Posts: 1,939
Has came a long way. Looking Mint!
Ben is offline   Reply With Quote
Old 17-01-2012, 07:55 PM   #11
smurfy
Senior Member
 
smurfy's Avatar
 
Join Date: Aug 2010
Location: sutherland shire, nsw
Car: sp20
Posts: 1,968
well done getting it back into such great shape, love the tail lights!
__________________

To many of us, our cars are an extension of our own personalities, the way we choose to modify reflects this.
smurfy is offline   Reply With Quote
Old 28-01-2012, 05:16 PM   #12
JDM323
Senior Member
 
JDM323's Avatar
 
Join Date: May 2011
Location: North Qld
Car: 2002 BJ2 protege
Posts: 1,241
Send a message via ICQ to JDM323
was handed my "lost" 2nd set of keys yesterday, they ended up in another car for almost 2 years and were found when they finally cleaned out their car.
so now i have 2 original transponder keys to program my flip keys from
http://www.ebay.com.au/itm/150731949...84.m1438.l2649 i have already ordered 2 bt50 key blanks from mazda for the temic 8c transponder chips
JDM323 is offline   Reply With Quote
Old 30-01-2012, 12:45 PM   #13
Rafferty
Junior Member
 
Join Date: Jan 2012
Location: Sydney
Car: 2001 Mazda Astina 323
Posts: 95
Looking Good! Liking the Sp20 Kit.
Rafferty is offline   Reply With Quote
Old 30-01-2012, 01:00 PM   #14
marcs_sp20
Moderator
 
marcs_sp20's Avatar
 
Join Date: Oct 2005
Location: Ipswich, Queensland
Car: 2002 Mazda Astina SP20 2006 Mazda 6 GY Wagon
Posts: 9,769
From what it was to what it is now, thats a huge difference, nice work!

The MX5 rims remind me of the MP3 wheels found on the Protege in the US, just needs to be a tad lower to pull the look off
__________________
[URL="http://www.astinagt.com/forums/vbpicgallery.php?do=view&g=590"]
marcs_sp20 is offline   Reply With Quote
Old 30-01-2012, 04:59 PM   #15
Clean_Cookie
obsessed-incomplete-broke
 
Clean_Cookie's Avatar
 
Join Date: Oct 2008
Location: Brisbane
Car: BA Hardtop/Hatch
Posts: 5,441
buying phils?
__________________
Worklog
Clean_Cookie is offline   Reply With Quote
Old 30-01-2012, 05:01 PM   #16
phildough
Banned
 
Join Date: May 2006
Location: Brisneyland, Queensland
Car: 2002 Mazda Frankenstina
Posts: 2,868
I have a set that are beyond cheap, they have 20-25K use.
Please buy them, I would love to get my car back on the road sooner!
phildough is offline   Reply With Quote
Old 30-01-2012, 05:19 PM   #17
phildough
Banned
 
Join Date: May 2006
Location: Brisneyland, Queensland
Car: 2002 Mazda Frankenstina
Posts: 2,868
Ohh well, I was offering a set of springs cheap, they can't exactly wear out.
As I said only have 20 K use and I have only upgraded as I have the MSF engine now.
I will also throw in the set of pedders front shocks for free!
BTW I will wipe the springs clean so they have been 'reconditioned'
phildough is offline   Reply With Quote
Old 18-02-2012, 04:04 PM   #18
JDM323
Senior Member
 
JDM323's Avatar
 
Join Date: May 2011
Location: North Qld
Car: 2002 BJ2 protege
Posts: 1,241
Send a message via ICQ to JDM323
pulled my headlights apart today as the tinted indicators were too dark for my liking and after a bit of work i am now happy with the look and performance

sorry about the phone pics.

Last edited by JDM323; 18-02-2012 at 04:08 PM.
JDM323 is offline   Reply With Quote
Old 23-02-2012, 06:15 PM   #19
xeon8
Senior Member
 
xeon8's Avatar
 
Join Date: Dec 2011
Location: Adelaide
Car: 2000 Mazda BJI Protege
Posts: 878
Looks awesome! Surely a great way to restore a crashed Protege! Has come a very long way since then, well done mate!
__________________


2010-2014: 2000 Mazda 323 Protege
2014 - 2016: 1991 Toyota MR2 SW20
2016 - Err, 2016: 2002 Mazda 323 Astina SP20
2016 - Err, uh, 2016: 1991 Mazda MX5 NA
2016 - 2017: 2000 Alfa 916 Spider
2017 - 2018: 2007 Alfa Brera
2018 - Current: 2018 Mazda 3 SP25
xeon8 is offline   Reply With Quote
Old 21-07-2012, 02:09 PM   #20
JDM323
Senior Member
 
JDM323's Avatar
 
Join Date: May 2011
Location: North Qld
Car: 2002 BJ2 protege
Posts: 1,241
Send a message via ICQ to JDM323
just got the car back from repairs with 1 mod then did another mod today

lucky i just clipped his nose

shaved aerial

self dimming rear view mirror, just have to wait until i can get the bits for power window/mirror conversion before the new weather shields get fitted.

Last edited by JDM323; 21-07-2012 at 02:28 PM.
JDM323 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time now is 10:18 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
2001- 2010 AstinaGT