|
|
Register | Readers Rides | Gallery | FAQ | Members List | Social Groups | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Display Modes |
05-09-2014, 07:20 PM | #1 |
Junior Member
Join Date: Sep 2014
Location: Planet earth
Car: Earth
Posts: 1
|
No spark 323 BA v6 2.0l
Hi , my daughter has a 1994 323 BA , v6 2.0l auto , she was driving home last night and the engine just stopped running , left her stranded on the side of the road . Got it home this morning and their is no spark coming from the distributor , fuel pressure is fine and everything elce . Tried to check the trouble codes by crossing over the TEN and GRD then touching a test light probe on the FEN and B+ teminals in the diag box under the hood and nothing , no blinking light not even any sighn of the test light going on . Any advise on what to check and how to check it would be great as i dont want to just run out and buy a new distributor if possible .
|
Sponsored Links |
09-09-2014, 05:57 PM | #2 |
Senior Member
Join Date: Feb 2010
Location: USA
Car: .
Posts: 2,623
|
probably bad dissy... common problem
__________________
Protege FAQ, the best 323/Protege/Mazda3 resource enjoyed worldwide for 10 years |
09-10-2014, 01:44 AM | #3 |
Junior Member
Join Date: May 2014
Location: Australia
Car: 98 V6 hatch white manual
Posts: 62
|
my response would be to look at the ignition module...only sign of pending failure is an ignition murmor ..simple cheap electronic part that works with the dizzy.. Thats where my money would be.. Known common failure as NRMA trucks have them on board
|
Thread Tools | |
Display Modes | |
|
|