|
12-10-2012, 11:07 PM | #1 |
Junior Member
Join Date: Apr 2011
Location: Central Coast
Car: Mazda 323 Astina '02
Posts: 220
|
BJII - Hub Swap 4 to 5 stud
So just wanted to know whether you need to swap the CV's if you change to SP20 hubs. Im assuming the brake caliper is the same?
|
Sponsored Links |
12-10-2012, 11:47 PM | #2 |
Senior Member
|
no just hubs and rotors i believe.
__________________
http://www.astinagt.com/forums/showthread.php?t=18798 WORKLOG |
13-10-2012, 12:08 AM | #3 |
Junior Member
Join Date: Apr 2011
Location: Central Coast
Car: Mazda 323 Astina '02
Posts: 220
|
Thanks
|
13-10-2012, 02:04 AM | #4 |
Senior Member
Join Date: Jun 2010
Location: wollongong
Car: 99, BJ 323 astina hatch
Posts: 1,506
|
yer cv's are the same calipers are the same just the hubs and rotors, the rear lower control arms are longer on the 1.8's(4stud) compaired to to sp20(5stud) by about a good 1/2 to 3/4 of an inch so either need to change them or just run more camber,
i'm currently having to run -3deg camber on the rear to fit the wheel in the guard, but thats low on 18'', might not have to run as much with smaller, thinner wheels, any questions just shoot us a pm
__________________
Cars .. 1: 241kw Turbo 1999 BJ 323 Astina . 2: 1983 ke70 Corolla. 3: 2011 PK Ranger Wildtrak (tow car ) |
13-10-2012, 06:11 PM | #5 |
Junior Member
Join Date: Apr 2011
Location: Central Coast
Car: Mazda 323 Astina '02
Posts: 220
|
Ive got camber bolts in there anyway, so i can just remove them i might need the extra camber anyway as im going to a set of 17x8's, cheers
|
13-10-2012, 08:34 PM | #6 |
AstinaGT Regular
Join Date: Apr 2009
Location: From Melbourne - In Sydney Now
Car: Mazda 323 SP20 TURBO
Posts: 331
|
i've got front callipers/rotors/ brake pads off SP20 if needed..
__________________
.:: FOR SALE :: Mazda SP20 TURBO ::.
ENGINE: Custom made T3/T4 Hybrid turbo (From US) | 38mm External Wastegate | Custom made Stainless Steel Manifold | Front Mount Intercooler | Aluminium Intercooler Piping | Blow Off Valve | Turbo Timer | Custom made 3" Mandrel Bent Turbo-back Exhaust | K&N Washable Pod Filter | Edelbrock 17939 Fuel Pump (255 liter/hr. (67 gph), 60+ psi for Turbo, Supercharger or Nitrous) | Hardrace harden rubber engine mount kit |
20-11-2012, 03:23 PM | #7 |
Junior Member
Join Date: Dec 2009
Location: Sydney
Car: BJ Astina
Posts: 21
|
Does anybody know if the 626 hubs are the same as the sp20?
|
21-11-2012, 08:24 AM | #8 |
Senior Member
Join Date: Feb 2010
Location: USA
Car: .
Posts: 2,623
|
rear ones are, but not front
fronts same as premacy
__________________
Protege FAQ, the best 323/Protege/Mazda3 resource enjoyed worldwide for 10 years |
|
|