|
|
Register | Readers Rides | Gallery | FAQ | Members List | Social Groups | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Display Modes |
16-03-2013, 06:15 PM | #1501 | |
Administrator
Join Date: Mar 2002
Location: melb.vic.au
Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle
Posts: 16,525
|
Quote:
Either way, it'll fit SP20. $26 via reg'd post to you.
__________________
jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--|--SLOWTEGE--|--BEETLE--|--SUBSTITUTE--|--AZ-1 |
|
20-04-2013, 10:47 PM | #1502 |
Junior Member
Join Date: Apr 2013
Location: Australia
Car: mazda
Posts: 1
|
mazda parts
Hi,
I'm interested in the, Mazda Luce AP RX4 Coupe Cigarette Box, Rotor Thermometer, RX8 Zippo Lighter, Whats the best price you could do Inc P+H, Thanks Matt Last edited by bitzacars; 20-04-2013 at 10:54 PM. |
21-04-2013, 10:28 AM | #1503 |
Administrator
Join Date: Mar 2002
Location: melb.vic.au
Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle
Posts: 16,525
|
PM sent!
__________________
jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--|--SLOWTEGE--|--BEETLE--|--SUBSTITUTE--|--AZ-1 |
06-05-2013, 09:51 AM | #1504 |
Junior Member
Join Date: Feb 2013
Location: 18301
Car: miatatatatata
Posts: 2
|
i joined this forum for this thread specifically.
if ever you see some zoom tail lights for an na miata...post them ****s up yo! |
06-05-2013, 11:32 AM | #1505 |
Senior Member
Join Date: Sep 2011
Location: north coast nsw
Car: 97 ba 1.8 323
Posts: 799
|
Is this the famous phillyb from CR.net?
|
06-05-2013, 06:18 PM | #1506 | |
Administrator
Join Date: Mar 2002
Location: melb.vic.au
Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle
Posts: 16,525
|
Quote:
Welcome to AGT, too
__________________
jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--|--SLOWTEGE--|--BEETLE--|--SUBSTITUTE--|--AZ-1 |
|
06-05-2013, 09:44 PM | #1507 | |
Junior Member
Join Date: Feb 2013
Location: 18301
Car: miatatatatata
Posts: 2
|
you spelled faggot wrong. i'm the faggot phillyb from cr. lol.
Quote:
i scour yaj! and rarely see them used. if you can, pm me a rough price new shipped to the states. zip is 18301 thanks!
__________________
|
|
07-05-2013, 08:55 AM | #1508 |
Junior Member
Join Date: Jul 2011
Location: Texas, USA
Car: NB8C
Posts: 5
|
you and your silly stickers
|
08-05-2013, 10:21 PM | #1509 |
Administrator
Join Date: Mar 2002
Location: melb.vic.au
Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle
Posts: 16,525
|
Just Added: 8/5/13
Mazdaspeed strut tower brace set for FD RX-7. Excellent condition overall. Lightweight oval-section alloy centre braces. Includes the very hard to find rear brace. $545 Mazda nardi airbag steering wheel from a Spirit-R FD RX-7. Unique to the FD, with perforated leather, red stitching and the Nardi logo. Only a limited number ever made! Perfect condition, with airbag module. $SOLD Mazdaspeed front strut tower brace for FD RX-7. Good condition, but centre brace could use a polish to be perfect. Lightweight oval-section alloy centre section, anodised ends. Variant version - the centre brace is angled back more than the regular ones. $240 Mazdaspeed front strut tower brace for FC RX-7. Good condition. Early (rarer!) version. $153 Mazdaspeed front strut tower brace for FD RX-7. Excellent condition. Lightweight oval-section alloy centre section, anodised ends. $SOLD
__________________
jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--|--SLOWTEGE--|--BEETLE--|--SUBSTITUTE--|--AZ-1 Last edited by Rupewrecht; 19-07-2015 at 10:02 AM. |
08-05-2013, 10:25 PM | #1510 |
Junior Member
Join Date: Mar 2013
Location: Newcastle
Car: Mazda 323 SP20
Posts: 100
|
One day i'll have an FD... one day...
|
17-05-2013, 10:00 PM | #1511 |
Administrator
Join Date: Mar 2002
Location: melb.vic.au
Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle
Posts: 16,525
|
SOLD:
Mazdaspeed Front Strut Brace for FD. $240 HKS Silent Hi-Power Exhaust for NA. $363 Carbing Aluminium Scuttle Air Diversion Panel for NA. $161 Mazdaspeed A-Spec Sideskirts in silver for Hatch & Hardtop. $432 Hatch Foglights. Early-type, with switch. $155 Mazdaspeed MS-01LM Pair in 17x8 +35 5x114.3 in Red. $365 Mazdaspeed MS-01LM Pair in 17x8 +35 5x114.3 in Red. $288 Mazdaspeed MS-01 Spanner. Fits 17-19" MS-01 variants. $78 Mazda Clean Bin. $73 Mazda Clean Bin. $73 Momo Steering Wheel. $172 Clear Corner Indicators from the limited Infini Sedan. $321 Mazdaspeed Aluminium/Carbonfibre Short Gearknob in Silver. $95 Mazdaspeed shift boot gaiter bung. $45 Mazdaspeed Sport Seat in black. $555 Work Equip 01 set in 15x7.5 +29/+32 4x100 in red. $1200 AutoExe Tail Lights. $220 AutoExe Lowering Suspension. $362 Mazdaspeed Gauge Cluster for NA. White face version. $308 Mazdaspeed Type-F Seat in black/grey mesh. $555 Mazdaspeed Type-F Seat in black/grey mesh. $555 ARC Magic Super Induction Airbox for NA8. $206 Pit Crew Racing Single Wiper Conversion. $238 Nismo LM GT4 set in 17x7.5 +30/17x8.5 +40 5x114.3. $1270 Mazdaspeed MS-02 Centre cap. $35 Mazdaspeed MS-02 Centre cap. $35 FD Magazine Issue 30. $25 Efini Steering Wheel. $129 Mazda Service Overalls. $98 Work Meister S1 2-piece set in 16x7.5 +35 4x100. $1631 Mazdaspeed Triple Gauge Pod for DY. $279 KG Works Rear View Mirror for NA. $143 Superlite-style 8-spoke set in 14x6 +18 4x114.3. $560 AutoExe 3pt Strut Brace. $325 Mazdaspeed front strut brace for NA/NB. $195 Mazdaspeed Aluminium/Carbonfibre Short Gearknob in Silver. $95 Mazdaspeed 360mm Steering Wheel. $229 Mazdaspeed Time Trap Lap Timer. $185 Mazdaspeed Triple Gauge Pod. $279 Mazdaspeed Oil Cap in Black. $122 SSR MK-2 set in 14x8 ±0 4x100. $1332 Volk Racing TE37 set in 16x7 +35 4x100. $1360 Work Emotion CR Kai set in 16x7 +35 4x100. $1030 ARC Magic Super Intake Chamber for NA6. $244 ARC Magic Super Intake Chamber for NA6. $251 ARC Magic Super Intake Chamber for NA6. $280 Cusco rear subframe brace for NA. $115 Mazdaspeed front strut brace for NA/NB. $152 Mazdaspeed front strut brace for NA/NB. $180 Mazdaspeed front strut brace for NA/NB. $180 Cusco Carbon Strut Brace for NA/NB. $165 Mazdaspeed Stickers. $10/$15 Mooneyes Lucky Star set in 15x7 +22 4x100. $950 Mazdaspeed Airbox for NA8. $290 Mazdaspeed front strut brace for NA/NB. $187 Mazdaspeed Emblem Set in black/gold. New. $70 Mazdaspeed Badge - Silver. $70 Mazdaspeed Oil Cap in Gold. New. $114 Enkei Dish Syndicate set in 15x7 +38 4x100. $785 Enkei Big End Barrel pair in 15x8 +20 4x100. $560 Hatch Clear Indicator Set. $180 Toda Adjustable Cam Gear for BP. $155 Mazdaspeed Adjustable-damper Shocks. $347 eCarBoy Aero Grille for BJII SP20. $171 ARC Magic Super Intake Chamber for NA8. $310 Carbing Aluminium Scuttle Air Diversion Panel for NA. $149 Carbing Aluminium Scuttle Air Diversion Panel for NA. $117 Mazdaspeed 4pt roll bar for NA/NB in chrome. $435 Toda Adjustable Cam Gear for NA/NB. $155 Spirit-R Nardi Steering Wheel for FD. $550 K&N Pod Filter. $55 Mazdaspeed Front Strut Brace for FC. $153 Stainless Exhaust Manifold for NA6. $327 ARC Magic Super Intake Chamber for NA6. $244 ARC Magic Super Intake Chamber for NA6. $244 Garage Vary Carbon Scuttle Air Diversion Panel for NA. $162
__________________
jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--|--SLOWTEGE--|--BEETLE--|--SUBSTITUTE--|--AZ-1 Last edited by Rupewrecht; 19-11-2013 at 03:57 PM. |
17-05-2013, 10:00 PM | #1512 |
Administrator
Join Date: Mar 2002
Location: melb.vic.au
Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle
Posts: 16,525
|
Just Added: 17/5/13
Work Wheels XSA 02C - set of 4, in 17x.5 +30 and +35, in 4x100 stud pattern. Excellent condition - no significant marks to them all all, and the lips are pretty much perfect. Gold centres, polished lips, and come the the Work centre caps. Tyres are Bridgestone Potenzas with average/low tread. $1175. Mazdaspeed MS-01 - set of 4, in 15x6.5 +35 4x100. Good condition, with only a small bit of rash on one lip as pictured. Some crazing to the clearcoat on the polished barrels. Deep dish look! Made by Rays Engineering. $560 Mooneyes Lucky Star chromed steel wheels - set of 4, in 15x7 with a +22 offset and multifit 4x100/4x114.3 stud patterns. Excellent condition, with a few small marks here and there. Comes with a set of 4 domed centre caps for a full 'smoothie' look. Tyres are Goodyear Eagle F1s in 195/50R15 with lots of tread. Very, very hard to find in such a good size! $SOLD. Work Emotion CR Kai - set of 4, in 16x7 with a +35 offset and in 4x100 stud pattern. Almost perfect condition, with only two small scuffs on a couple of lips. Finished in Work Matte Bronze (MHG). $SOLD. Nismo LM GT4 - set of 4, in 17x7.5 +30, 17x8.5 +40, in 5x114.3 stud pattern. Made by Rays Engineering, and rebranded with Mazdaspeed stickers - and if you didn't know the differences you'd think they were the same as the MS-01S. these are a forged monoblock wheels - so very light and very strong. Finished in bronze. Great condition, apart from some rash in the lip of one wheel as pictured, and a small scrape on another. Tyres on the 17x8.5s are Yokohama Advan A048 with low tread. A bargain for forged wheels! $SOLD Enkei Big End Barrel - pair, in 15x8 +20 4x100. Excellent condition, no significant marks. Hard to find in this sizing, and harder now they're discontinued. Lots of concave to these ones! $SOLD. Weds Sport Racing Tri-spoke, pair in 14x6 +12 4x114.3. One of the earlier trispoke designs, and these are in great condition with only some minor rash on one wheel as pictured. Custom painted with the Weds lettering machined to highlight it. Barrels and lips could use a polish to be perfect, but are otherwise very presentable. Very rare! $SOLD.
__________________
jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--|--SLOWTEGE--|--BEETLE--|--SUBSTITUTE--|--AZ-1 Last edited by Rupewrecht; 08-04-2014 at 10:50 AM. |
18-05-2013, 01:54 PM | #1513 |
Administrator
Join Date: Mar 2002
Location: melb.vic.au
Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle
Posts: 16,525
|
Just added: 18/5/2013
AutoExe carbonfibre ram air intake for BJ 323 Astina & Protege / Familia. Made by GruppeM, and uses a washable K&N cone filter. Good condition, and comes with mounting bracket and silicone joiner. The best-sounding intake for BJs! $SOLD. MintBlue rear wing for BJ 323 Astina / Familia S-Wagon. Very rare ouside of Japan, and gives the Hatch a bit of a WRC look as it mounts lower down the sides than the OEM rear wing (which can still be used!). Very light, made of FRP as far as i can tell, and in good condition. $SOLD. AutoExe 3 point front strut tower brace for BJ 323 Astina & Protege / Familia. Made by Carbing for AutoExe. Alloy, so very light and strong. Excellent condition. Fits all RHD BJ 323s. Has a brake master cylinder stopper for improved braking response! $SOLD. Gialla Sportivo aero grille for BJI 323 Astina & Protege / Familia. Extremely rare. Suits 1998-01. Painted matte black, but otherwise excellent condition. $SOLD. AutoExe tail lights for BJ 323 Astina Hatch / Familia S-Wagon. Early AutoExe, and hard to find! Uses the JDM double-light lights. Good condition, but does have a scuff in the paint on one light as pictured. Comes with looms - plug and play! $SOLD. Sport20 fog lights for BJ 323 Astina & Protege SP20 / Familia. Great condition - no chips or cracks, but one has a slight discoloration at the bottom. Comes with mounts and looms. Over $600 each new from Mazda. $ONE SOLD, One left for $90. AutoExe stainless steel muffler for BJ 323 Protege Sedan. Very rare sedan version, which uses a longer tip to suit the extra length of the Protege. Great condition, but some slight heat discoloration (that usually polishes out with a bit of work). Straight bolt-on application, and a great sound. $335. Carbing front strut tower brace for BJ 323 Astina & Protege / Familia. Alloy version - lightweight. Excellent condition. Also fits GW Capella / 626. $188. Tanabe Hyper Medalion stainless steel muffler for BJ 323 Astina / Familia S-Wagon / Protege 5. Hatch only. 50mm piping, 100mm tip. Good condition, no rattles, could do with a polish but does polish up well as per the clean spot on the barrel! $245. Momo airbag steering wheel - OEM Mazda wheel to suit BA Astina/Protege 323, NA MX-5, FD RX-7 etc. Leather, and in good condition. Comes with the airbag module. $SOLD. Lamco Boost and Volts gauges, from a BG 323 Familia GT-X / GT-R. Good condition. Comes with mount, looms, but no sensors. $138.
__________________
jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--|--SLOWTEGE--|--BEETLE--|--SUBSTITUTE--|--AZ-1 Last edited by Rupewrecht; 07-01-2014 at 05:58 PM. |
18-05-2013, 09:24 PM | #1514 |
Administrator
Join Date: Mar 2002
Location: melb.vic.au
Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle
Posts: 16,525
|
Just added: 18/5/2013
Zoom Engineering tombstone for NA MX-5. Fits over the centre stack in the dash of the NA, adding three gauges at the top. Three Autometer gauges included: Volts, Vacuum and Water temp. Good condition, made of FRP and aluminium. Has a disc stuck to the top, but can be easily removed. $355. Mazdaspeed 4-point roll bar for NA & NB MX-5. Chrome version, in excellent condition. Stiffens the car, adds safety, and mounts to factory holes. Fits under hard- and soft-top. $435. ARC Magic Super Intake Chamber for NA6 1.6 MX-5. Handmade from alloy, in excellent condition. Increases engine response and reduces heat soak. Comes with silicone joiners for plug-and-play replacement. $SOLD. Cusco carbonfibre strut tower brace for NA & NB MX-5. Top of the line version from Cusco, quite rare. Alloy ends that could use a polish, but otherwise good condition. $SOLD. Fujitsubo Giken (FGK) stainless steel manifold for NA6 1.6 MX-5. 4-1 version, in excellent condition. Good for top end power! $287. HKS Kansai Service air diversion radiator cooling plate for NA MX-5. Alloy, with Kansai and Cusco stickers. Needs a polish! $113. Mazdaspeed gauge cluster for NA MX-5. White face version, with red backlight. Includes the Mazdaspeed carbon-look gauge fascia panel as well. $SOLD K.G. Works roll bar for NA & NB MX-5. Polished alloy, in excellent condition. Also comes with a K.G. Works harness brace for added strength and for use with a seat belt harness. $SOLD
__________________
jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--|--SLOWTEGE--|--BEETLE--|--SUBSTITUTE--|--AZ-1 Last edited by Rupewrecht; 19-11-2013 at 04:30 PM. |
19-05-2013, 08:49 PM | #1515 |
Administrator
Join Date: Mar 2002
Location: melb.vic.au
Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle
Posts: 16,525
|
Just added: 19/5/2013
Mazdaspeed Sport seat in black. Synthetic leather outer with Mazdaspeed graduated meshed fabric in the centre. Quick tilt handles on the side, rotating handle on the side to adjust the angle, and an integral slide mechanism in the base. Excellent condition - very hard to find in such a good state. Will fit most 80s+ Mazdas with the appropriate mounts. $SOLD. Mazdaspeed Sport seat in black. Synthetic leather outer with Mazdaspeed graduated meshed fabric in the centre. Quick tilt handles on the side, rotating handle on the side to adjust the angle, and an integral slide mechanism in the base. Excellent condition, but does have a slight crush in the rear from an MX-5 b-pillar (but is not torn). Will fit most 80s+ Mazdas with the appropriate mounts. $555. Mazdaspeed Type-F seat in black/grey. Synthetic suede outer with grey meshed fabric in the centre. Quick tilt handles on the side, rotating handle on the side to adjust the angle, and an integral slide mechanism in the base. Excellent condition. Zoom-Zoom era. Will fit most 80s+ Mazdas with the appropriate mounts. $SOLD. Mazdaspeed Type-F seat in black/grey. Synthetic suede outer with grey meshed fabric in the centre. Quick tilt handles on the side, rotating handle on the side to adjust the angle, and an integral slide mechanism in the base. Excellent condition. Zoom-Zoom era. Will fit most 80s+ Mazdas with the appropriate mounts. $SOLD.
__________________
jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--|--SLOWTEGE--|--BEETLE--|--SUBSTITUTE--|--AZ-1 Last edited by Rupewrecht; 08-06-2013 at 04:35 PM. |
20-05-2013, 07:39 AM | #1516 |
Senior Member
Join Date: Jun 2008
Location: Auchenflower, Brisbane
Car: Blue SP20
Posts: 2,782
|
Rupe this question will have been asked before but any chance these will fit on recaro rails?
EDIT: these being type fs.
__________________
Last edited by Ice88; 20-05-2013 at 07:42 AM. |
20-05-2013, 11:35 AM | #1517 | |
Administrator
Join Date: Mar 2002
Location: melb.vic.au
Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle
Posts: 16,525
|
Quote:
http://www.astinagt.com/forums/showthread.php?t=16715 These have integral rails.
__________________
jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--|--SLOWTEGE--|--BEETLE--|--SUBSTITUTE--|--AZ-1 |
|
20-05-2013, 01:34 PM | #1518 |
Senior Member
Join Date: Jun 2008
Location: Auchenflower, Brisbane
Car: Blue SP20
Posts: 2,782
|
Thanks Rupe.
Will take a look and see how hard it would be to get these mated up to BJ EDIT: Not sure id fit the type f. I need a fat bastard version or something I'd imagine Still will have a look for curiosities sake :P
__________________
|
20-05-2013, 02:06 PM | #1519 | |
Senior Member
|
Quote:
Just have to measure twice and cut once... and make em' strong! lol and you can weld brackets up... or cut and fold them.
__________________
|
|
20-05-2013, 03:05 PM | #1520 |
obsessed-incomplete-broke
Join Date: Oct 2008
Location: Brisbane
Car: BA Hardtop/Hatch
Posts: 5,441
|
Kris, you would fit in them, but whether or not itd be as comfy as the stock ones would be is the question. they are quite pliable, unlike a fibreglass version. once I get mine mounted you can have a sit. all i need to do is get the dash back together before that happens.
__________________
Worklog |
Tags |
a-spec, auto exe, autoexe, exe, lantis, mazda, mazda speed, mazdaspeed, ms touring, ms-01, ms-01s, ms-02, ms-03, ms01, ms01r, ms01s, ms02, ms03, mx-5, rx7, seat, speed, type-f |
Thread Tools | |
Display Modes | |
|
|