What do you do for work? - Page 3

NaughtyGT · 25-02-2010, 01:58 PM

Quote:

Originally Posted by DavoAust

Developer for QUT, Brisbane. Working on integrating existing databases and moving to some modern techonology/standards. Ie. I annoy people. A lot

I did Psych subjects @ Garden Point & Carseldine campuses while back. Used to catch the train to Zillmere from Capalaba & walk across to Cd campus.

DavoAust · 26-02-2010, 02:09 AM

Quote:

Originally Posted by NaughtyGT

I did Psych subjects @ Garden Point & Carseldine campuses while back. Used to catch the train to Zillmere from Capalaba & walk across to Cd campus.

thats a train trip and a half. i'm final semester business/IT double. can't wait to finish. friends are almost done psych courses, apparently they've been dumbed down in the last 5 years and its driving people nuts

NaughtyGT · 26-02-2010, 07:22 AM

Quote:

Originally Posted by DavoAust

thats a train trip and a half. i'm final semester business/IT double. can't wait to finish. friends are almost done psych courses, apparently they've been dumbed down in the last 5 years and its driving people nuts

train trip alright! all best with degree

Psych studies were very drab when I did them. Dry, unfriendly atmosphere. Long haul too. You really have to want to go through with it to end

sandman_kar · 26-02-2010, 07:56 PM

- casual relief teacher (primary)
- sales assistant at david jones
- special event merchandiser
- and hopefully a cabin crew member for an airline shortly....

so yes all over the place atm

NaughtyGT · 26-02-2010, 08:29 PM

Quote:

Originally Posted by sandman_kar

- casual relief teacher (primary)
- sales assistant at david jones
- special event merchandiser
- and hopefully a cabin crew member for an airline shortly....

so yes all over the place atm

good on you sandman

Your out there & employable obviously!

I remember back in 99' I was completing a double Diploma in business & Management. Buggered if I knew what to do with me life @ the time. We were being taught a module, Conflict Resolution. Teacher said in the future (think about this) people won't be working in a factory for 20 years. We will have a Portfolio of Jobs. Casual not permanent

I'm probably going back to agency work soon & ditching the permanent bum kissing

asanga · 26-02-2010, 11:31 PM

Senior design engineer for a micro electronics company in Sydney. Deal with CMOS, MEMS wafer fabrication , testing, computer control robotics ,mechanical design, software & hardware integration, etc.

Have access to state of the art workshop & lab....perfect for working on car stuff.!!! Specially on weekends....

70NYD · 27-02-2010, 12:13 AM

Quote:

Originally Posted by asanga

Senior design engineer for a micro electronics company in Sydney. Deal with CMOS, MEMS wafer fabrication , testing, computer control robotics ,mechanical design, software & hardware integration, etc.

Have access to state of the art workshop & lab....perfect for working on car stuff.!!! Specially on weekends....

im jelaous

i want to be a design engineer (pref car related) when i finish my course

asanga · 27-02-2010, 09:50 AM

Quote:

Originally Posted by 70NYD

im jelaous

i want to be a design engineer (pref car related) when i finish my course

if u were in Sydney....i would have recommended u for my team!..lol... its not very easy to get into automotive industry....we have quite a few guys who used to work for ford (engine design ), Bishop (steering rack design for GM & ford) and Denso Asia. But what we do is nothing close to automotive stuff....we have multidisciplinary teams who develop an innovative technology!

miah87 · 29-03-2010, 11:09 AM

Hey, just wondering are there anyone currently working part time job in melbourne and where are you working?

70NYD · 29-03-2010, 12:10 PM

Quote:

Originally Posted by asanga

if u were in Sydney....i would have recommended u for my team!..lol... its not very easy to get into automotive industry....we have quite a few guys who used to work for ford (engine design ), Bishop (steering rack design for GM & ford) and Denso Asia. But what we do is nothing close to automotive stuff....we have multidisciplinary teams who develop an innovative technology!

yeha man thx its the thought that counts

i know its fkn hard to get in to the car industry as a engineer.. but thats the reason y i did mechanical engineering in the 1st place

Plutonus · 30-03-2010, 12:15 AM

Work in Operations for a Superannuation Company.

Simondo · 08-05-2010, 01:28 AM

I work in IT. Hence I can spend all hours of the working day arseing about on Mazda sites.

mkid · 10-05-2010, 08:30 AM

student at wollongong university studying biologyical sciencesfirst year
work weekends at luessink engineering and fabrication finishing off jobs to get out on monday mornings this is great because i put the job inthe machine run the program and wait 2 hours for the next one to go into the CNC so i have plenty of time to make up stuff on the laves, cncs and robotic welder
and just about to start a night time job as a bartender at warilla bowls and sport club

i got no idea what i what to do went i finish my course but probs get into biology science teaching at my old high school they employ heaps of ex students

Brisbane_boy · 10-07-2010, 05:02 PM

i got a job that i started this week working at the volvo and mack truck production
I work in the paint shop spraying and detailing all the cabs, bonnets and sleeper boxes.

Ice88 · 10-07-2010, 08:57 PM

I work at eagle boys as what ever really. Ive been there so long i just do what evers needed on the night.

Cant wait to finish my degree at QUT.

speedracr79 · 23-09-2011, 04:57 AM

Warehouse tech/driver for a medical supply company.

JDM323 · 23-09-2011, 05:52 AM

solid surface fabricator (acrylic counter tops)

Justin-sp20 · 23-09-2011, 06:13 AM

First year plumbing apprentice and a butcher on weekends

smurfy · 23-09-2011, 08:16 AM

-studying sport devleopment at tafe
- so from that either go into 2nd yr of pe teaching at uni or go work as a development officer.
- causal at pauls warehouse (i sell shoes

)
- then in the hoildays work for footbal(soccer) nsw as a coach ($$$)

Ben · 23-09-2011, 11:10 AM

I work for centrelink... They pay me money to be a student.. I'm at uni to be a graphic designer/web designer/developer/jack of all trades with any kind of computer based design.

Oh, job. right.

I work as a casual at coles, work is easy and pay is decent. So works out well. (I only work sundays, time and a half pay woot woot)

26-02-2010, 11:31 PM	#46
asanga Senior Member Join Date: Dec 2006 Location: Sutherland Sydney Car: astina BA 1997 1.8Ltr Posts: 609 View Photos By: asanga	Senior design engineer for a micro electronics company in Sydney. Deal with CMOS, MEMS wafer fabrication , testing, computer control robotics ,mechanical design, software & hardware integration, etc. Have access to state of the art workshop & lab....perfect for working on car stuff.!!! Specially on weekends.... __________________ 1997 Astina BA11P3, 5 Door Hatch, 1.8 DOHC, 5 Speed, 90,000 kms

29-03-2010, 11:09 AM	#49
miah87 Junior Member Join Date: Feb 2010 Location: Flemington Car: R33 sedan Posts: 212 View Photos By: miah87	Hey, just wondering are there anyone currently working part time job in melbourne and where are you working? __________________ hmmm

30-03-2010, 12:15 AM	#51
Plutonus Senior Member Join Date: Jun 2006 Location: Sydney, NSW Car: Traitor vehicle Posts: 778 View Photos By: Plutonus	Work in Operations for a Superannuation Company. __________________

08-05-2010, 01:28 AM	#52
Simondo Junior Member Join Date: Mar 2010 Location: Aberdeen, UK Car: Mazda Lantis Type-R Posts: 52 View Photos By: Simondo	I work in IT. Hence I can spend all hours of the working day arseing about on Mazda sites. __________________

10-07-2010, 05:02 PM	#54
Brisbane_boy Senior Member Join Date: Mar 2009 Location: Brisbane QLD Car: 2002 323 astina Posts: 1,059	i got a job that i started this week working at the volvo and mack truck production I work in the paint shop spraying and detailing all the cabs, bonnets and sleeper boxes. __________________ If your not allowed to go fast, you might as well look fast

26-02-2010, 07:56 PM	#44
sandman_kar AstinaGT Regular Join Date: Jan 2006 Location: melbourne Car: 2003 Mazda 6 Luxury Sport Hatch Posts: 403 View Photos By: sandman_kar	- casual relief teacher (primary) - sales assistant at david jones - special event merchandiser - and hopefully a cabin crew member for an airline shortly.... so yes all over the place atm

10-05-2010, 08:30 AM	#53
mkid Senior Member Join Date: Apr 2010 Location: Wollongong, NSW, australia Car: BK 3 SP23 Posts: 840	student at wollongong university studying biologyical sciencesfirst year work weekends at luessink engineering and fabrication finishing off jobs to get out on monday mornings this is great because i put the job inthe machine run the program and wait 2 hours for the next one to go into the CNC so i have plenty of time to make up stuff on the laves, cncs and robotic welder and just about to start a night time job as a bartender at warilla bowls and sport club i got no idea what i what to do went i finish my course but probs get into biology science teaching at my old high school they employ heaps of ex students

10-07-2010, 08:57 PM	#55
Ice88 Senior Member Join Date: Jun 2008 Location: Auchenflower, Brisbane Car: Blue SP20 Posts: 2,782	I work at eagle boys as what ever really. Ive been there so long i just do what evers needed on the night. Cant wait to finish my degree at QUT. __________________

23-09-2011, 04:57 AM	#56
speedracr79 Junior Member Join Date: Sep 2011 Location: SATX Car: Protege Posts: 73	Warehouse tech/driver for a medical supply company. __________________ BUILD THREAD Last edited by speedracr79; 23-09-2011 at 06:37 AM.

23-09-2011, 05:52 AM	#57
JDM323 Senior Member Join Date: May 2011 Location: North Qld Car: 2002 BJ2 protege Posts: 1,241	solid surface fabricator (acrylic counter tops)

23-09-2011, 06:13 AM	#58
Justin-sp20 Junior Member Join Date: Mar 2011 Location: Casula Car: 2002 sp20 Posts: 104	First year plumbing apprentice and a butcher on weekends

23-09-2011, 08:16 AM	#59
smurfy Senior Member Join Date: Aug 2010 Location: sutherland shire, nsw Car: sp20 Posts: 1,968 View Photos By: smurfy	-studying sport devleopment at tafe - so from that either go into 2nd yr of pe teaching at uni or go work as a development officer. - causal at pauls warehouse (i sell shoes ) - then in the hoildays work for footbal(soccer) nsw as a coach ($$$) __________________ To many of us, our cars are an extension of our own personalities, the way we choose to modify reflects this.

23-09-2011, 11:10 AM	#60
Ben Senior Member Join Date: Jun 2011 Location: Sunshine Coast Car: MPS Posts: 1,939	I work for centrelink... They pay me money to be a student.. I'm at uni to be a graphic designer/web designer/developer/jack of all trades with any kind of computer based design. Oh, job. right. I work as a casual at coles, work is easy and pay is decent. So works out well. (I only work sundays, time and a half pay woot woot)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode