Go Back   AstinaGT Forums > Classifieds > Group Buys & Special Offers

Reply
 
Thread Tools Display Modes
Old 28-07-2014, 07:10 PM   #1
HAIGHIE
Senior Member
 
HAIGHIE's Avatar
 
Join Date: Jun 2010
Location: wollongong
Car: 99, BJ 323 astina hatch
Posts: 1,506
GI: Wholesale 20mm Rear Sway Bar Remake

Hello Fellow AGT friends.

As stated in title, there will be a re-make / copy of the Wholesale 20mm Rear Sway Bar (RSW) for the Mazda (BJ) series. By far the best one ever.

For all of you looking to get the most out of your cars handling this is by far the greatest mod and most cost effective out of all of them. And will give your car that go kart feeling.

Now the more Numbers we have the cheaper it will be, all RSB's will be supplied with Super Pro D-bushes as well with CUT TO LENGHT end links. Unless you already have AAC links.

I will make a HOW TO on fitting the bar so there will not be any issues with sway bar Knock. As this seemed to be a big issue previously with incorrect fitment of the RSB. With INCORRECT length END LINKS

I hope to have the bar around the $300 mark with the extras, but as I said before the more that get made the cheaper it will be, the less the more expensive it will be.

And then shipping but if there are more then one going to Say QLD I can send together and you can cut the shipping costs in haft,

The time on these RSB's are around a 4-6 week process to have them copied and sent back to me, so give a rough time frame of up to 8ish weeks from the time of order and it will be in your car.

So once we start to get a good number of interest I will get the Ball rolling

lets see some numbers.


1. ONE23Q
2.
3.
4.
5.
__________________
Cars .. 1: 241kw Turbo 1999 BJ 323 Astina . 2: 1983 ke70 Corolla.
3: 2011 PK Ranger Wildtrak (tow car )


Last edited by HAIGHIE; 28-07-2014 at 10:52 PM.
HAIGHIE is offline   Reply With Quote
Sponsored Links
Old 28-07-2014, 07:20 PM   #2
ONE23Q
Junior Member
 
Join Date: Dec 2012
Location: Wagga Wagga
Car: Mazda 323 astina
Posts: 67
Interested :-)
ONE23Q is offline   Reply With Quote
Old 28-07-2014, 10:52 PM   #3
HAIGHIE
Senior Member
 
HAIGHIE's Avatar
 
Join Date: Jun 2010
Location: wollongong
Car: 99, BJ 323 astina hatch
Posts: 1,506
Number one there Kyle
__________________
Cars .. 1: 241kw Turbo 1999 BJ 323 Astina . 2: 1983 ke70 Corolla.
3: 2011 PK Ranger Wildtrak (tow car )

HAIGHIE is offline   Reply With Quote
Old 29-07-2014, 05:31 AM   #4
JDM323
Senior Member
 
JDM323's Avatar
 
Join Date: May 2011
Location: North Qld
Car: 2002 BJ2 protege
Posts: 1,241
Send a message via ICQ to JDM323
If it's a copy/remake why not have the center profile moved forward to correct the knocking issue that the prototype run had, this would reduce the need for shimming/spacing the bar mounts and the bj1 rear end links suit the wholesale rsb quite well also.
JDM323 is offline   Reply With Quote
Old 29-07-2014, 08:50 AM   #5
ohfosho
Junior Member
 
Join Date: Feb 2012
Location: Brisbane
Car: '02 SP20
Posts: 1
Very interested
ohfosho is offline   Reply With Quote
Old 05-08-2014, 05:55 PM   #6
Eddy
Junior Member
 
Join Date: Jul 2014
Location: Rooty Hill
Car: Protege5
Posts: 9
Quote:
Originally Posted by HAIGHIE View Post
Hello Fellow AGT friends.

As stated in title, there will be a re-make / copy of the Wholesale 20mm Rear Sway Bar (RSW) for the Mazda (BJ) series. By far the best one ever.

For all of you looking to get the most out of your cars handling this is by far the greatest mod and most cost effective out of all of them. And will give your car that go kart feeling.

Now the more Numbers we have the cheaper it will be, all RSB's will be supplied with Super Pro D-bushes as well with CUT TO LENGHT end links. Unless you already have AAC links.

I will make a HOW TO on fitting the bar so there will not be any issues with sway bar Knock. As this seemed to be a big issue previously with incorrect fitment of the RSB. With INCORRECT length END LINKS

I hope to have the bar around the $300 mark with the extras, but as I said before the more that get made the cheaper it will be, the less the more expensive it will be.

And then shipping but if there are more then one going to Say QLD I can send together and you can cut the shipping costs in haft,

The time on these RSB's are around a 4-6 week process to have them copied and sent back to me, so give a rough time frame of up to 8ish weeks from the time of order and it will be in your car.

So once we start to get a good number of interest I will get the Ball rolling

lets see some numbers.


1. ONE23Q
2. Eddy
3.
4.
5.
Add me to the list
Eddy is offline   Reply With Quote
Old 06-08-2014, 06:04 PM   #7
HAIGHIE
Senior Member
 
HAIGHIE's Avatar
 
Join Date: Jun 2010
Location: wollongong
Car: 99, BJ 323 astina hatch
Posts: 1,506
Good to see another one down if I can get 5 people as deff's I'll get the ball rolling.

Shane: I could do that but then for all the people who don't own a BJ1 ( most )
They would still have to buy a set of standard BJ1 end links, which compared to the cut to length ones the standard pins are piss weak. And I didn't have to shim the bar at all to get it to fit. As I said if you install the bar correctly with the end links at the correct length there will be "0" fouling.

I just put the AWR swaybar mounting brackets on because it looks mad and yes it puts a bigger surface mount on the rear crossmember but not actually needed
__________________
Cars .. 1: 241kw Turbo 1999 BJ 323 Astina . 2: 1983 ke70 Corolla.
3: 2011 PK Ranger Wildtrak (tow car )

HAIGHIE is offline   Reply With Quote
Old 07-08-2014, 04:40 AM   #8
JDM323
Senior Member
 
JDM323's Avatar
 
Join Date: May 2011
Location: North Qld
Car: 2002 BJ2 protege
Posts: 1,241
Send a message via ICQ to JDM323
the only reason mine has 3mm shims was to stop the lateral locks from rubbing against the crossmember, with the bj1 end links on my bj2 there is no knocking at all.
JDM323 is offline   Reply With Quote
Old 10-08-2014, 11:14 PM   #9
hart3_9
Junior Member
 
Join Date: Jan 2010
Location: Griffith NSW
Car: 03 sp20
Posts: 39
Let me know how u guys go id love to get on
hart3_9 is offline   Reply With Quote
Old 10-08-2014, 11:15 PM   #10
bennysp20
Junior Member
 
Join Date: Sep 2010
Location: Campbelltown
Car: Mazda 323 Sp20
Posts: 5
Wasn't sure if I really need express my interest but obviously I'm in hehehe
bennysp20 is offline   Reply With Quote
Old 11-08-2014, 07:22 PM   #11
HAIGHIE
Senior Member
 
HAIGHIE's Avatar
 
Join Date: Jun 2010
Location: wollongong
Car: 99, BJ 323 astina hatch
Posts: 1,506
Haha benny lol I'll put your names down
__________________
Cars .. 1: 241kw Turbo 1999 BJ 323 Astina . 2: 1983 ke70 Corolla.
3: 2011 PK Ranger Wildtrak (tow car )

HAIGHIE is offline   Reply With Quote
Old 11-08-2014, 07:43 PM   #12
Keano
Junior Member
 
Keano's Avatar
 
Join Date: Feb 2013
Location: Penrith (NSW)
Car: 2002 Mazda Sp20
Posts: 139
Ben Kean is very keen !!!
__________________
B.Kean
Keano is offline   Reply With Quote
Old 17-08-2014, 10:26 PM   #13
SLY 323
Senior Member
 
SLY 323's Avatar
 
Join Date: Jul 2010
Location: Wollongong
Car: 95' Mazda BA 323
Posts: 747
I'm In!!
__________________
Too many Mazdas. ♡
SLY 323 is offline   Reply With Quote
Old 02-09-2014, 12:12 AM   #14
TheLast323
Junior Member
 
TheLast323's Avatar
 
Join Date: Dec 2012
Location: QLD
Car: 01' SP20
Posts: 60
I'm also interested in one please
TheLast323 is offline   Reply With Quote
Old 06-07-2015, 01:40 PM   #15
1MAQL8
Junior Member
 
1MAQL8's Avatar
 
Join Date: Dec 2005
Location: Lost in Brisbane somewhere
Car: 2002 SP20
Posts: 49
Send a message via MSN to 1MAQL8
I know it's an old thread.....but I'd potentially be interested
__________________
2002 Mazda Astina SP20
Loads of work to do......with so little time and money
1MAQL8 is offline   Reply With Quote
Old 16-11-2015, 01:40 PM   #16
Rambo sp20
Junior Member
 
Join Date: Sep 2015
Location: Geelong
Car: 2001 323 SP20
Posts: 11
I'm interested
Rambo sp20 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time now is 11:39 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
2001- 2010 AstinaGT