Whats the deal with my camber pins?

:Jear: · 06-07-2003, 02:59 PM

Need some help here guys: Last month I went to Bob Janes to have some new tyres fitted, while I was there I decided to get them to put some camber pins in. On the bill it says "Pedders camber pin $125" I naturally assumed that these things come in sets of 2? Hoever I was looking under the car today and from what I can tell they have only instaled 1! (on the back left wheel). Does this seem right to you guys, I should have one on each front wheel shouldn't I?

Cosmo Dude · 06-07-2003, 08:14 PM

Well if the camber was a problem on only one wheel then that should've fixed it. I'd like to (but never will) know what caused the problem.

Another half-assed job by Bob

:Jear: · 06-07-2003, 09:25 PM

Thanks, but what im asking is did I get ripped buy paying $125 for one camber pin when I should have got 2?, Iv never had a problem with BobJane (Nepean Hwy) so thats why im puzzled :?:

Toyboy · 06-07-2003, 09:34 PM

I think they ripped ya man,it should be around the $80 each pin mark :P But the rest could of been for labour(fitting of the pin),i still recon they should of installed them on each side :?

Rupewrecht · 06-07-2003, 10:51 PM

that's just stuffed! i got a set for less that that! (not installed)

06-07-2003, 02:59 PM	#1
:Jear: Junior Member Join Date: Jun 2003 Location: Melbourne Posts: 76	Whats the deal with my camber pins? Need some help here guys: Last month I went to Bob Janes to have some new tyres fitted, while I was there I decided to get them to put some camber pins in. On the bill it says "Pedders camber pin $125" I naturally assumed that these things come in sets of 2? Hoever I was looking under the car today and from what I can tell they have only instaled 1! (on the back left wheel). Does this seem right to you guys, I should have one on each front wheel shouldn't I?

06-07-2003, 08:14 PM	#2
Cosmo Dude コスモ Join Date: Dec 2002 Location: Location: Vic Car: Mazda '95 Astina I4, '86 B2K and '10 3 MZR-CD Posts: 7,888 View Photos By: Cosmo Dude	Well if the camber was a problem on only one wheel then that should've fixed it. I'd like to (but never will) know what caused the problem. Another half-assed job by Bob __________________ My 'stina Hatch

06-07-2003, 09:34 PM	#4
Toyboy Senior Member Join Date: Jul 2002 Location: nsw Car: Ba Astina Posts: 1,113	I think they ripped ya man,it should be around the $80 each pin mark :P But the rest could of been for labour(fitting of the pin),i still recon they should of installed them on each side :? __________________ "Man who drop watch in toilet have ****ty time."

06-07-2003, 10:51 PM	#5
Rupewrecht Administrator Join Date: Mar 2002 Location: melb.vic.au Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle Posts: 16,525 View Photos By: Rupewrecht	that's just stuffed! i got a set for less that that! (not installed) __________________ jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--\|--SLOWTEGE--\|--BEETLE--\|--SUBSTITUTE--\|--AZ-1

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ABOUT: Understanding your cars suspension geometry	Rupewrecht	Suspension & Wheels	5	19-02-2015 01:05 AM
HOW TO: Adjust your BJ caster and camber at the front wheels	platypus	Suspension & Wheels	96	12-10-2013 05:22 PM
FS: 2 x SPC Camber Bolts to fit 323 Astina / 626 / MX6	HI-RES	For Sale/Wanted	0	01-09-2005 04:29 PM
WHeel Alignment and Camber	mysp20	Suspension & Wheels	10	23-08-2004 12:27 PM
Standard Camber Adjustment	Toyboy	Suspension & Wheels	6	13-06-2003 08:33 PM

06-07-2003, 09:25 PM	#3
:Jear: Junior Member Join Date: Jun 2003 Location: Melbourne Posts: 76	Thanks, but what im asking is did I get ripped buy paying $125 for one camber pin when I should have got 2?, Iv never had a problem with BobJane (Nepean Hwy) so thats why im puzzled :?: