AstinaGT Forums

AstinaGT Forums (http://www.astinagt.com/forums/index.php)
-   Rupewrecht's JDM Parts - jdmparts.rupewrecht.com (http://www.astinagt.com/forums/forumdisplay.php?f=43)
-   -   [JDM] Mazdaspeed MS-01 / MS-01R / MS-01F / MS-01C / MS-01S rims (http://www.astinagt.com/forums/showthread.php?t=8549)

Rupewrecht 14-02-2007 12:48 PM

[JDM] Mazdaspeed MS-01 / MS-01R / MS-01F / MS-01C / MS-01S rims
 
Ok, in this thread you'll find all the MS-01 rims for sale at any time on the auctions.


http://rupewrecht.com/forsale/MS-01chart.jpg

Chi'sLantis 27-04-2007 10:22 AM

too bad i really like the ones from the first pic only there in 5 stud which is a shame.

Ronin (Adam) 02-05-2007 08:17 AM

they're gorgeous wheels...

mcwilly 02-05-2007 11:47 AM

pitty the gold ones are 5 stud look sick

DavoAust 14-06-2007 06:09 PM

wow, love the first set of 4

is it possible to get 4 stud ones through mazda speed in aust? or is it just jpn?

Rupewrecht 14-06-2007 06:58 PM

Nah, Mazda Aus don't generally deal with Mazdaspeed stuff as they wont cover it with a warranty.

There's a few sets of 4 stud ones above.

Plutonus 20-06-2007 09:08 PM

I want gold ones. Pimpin.

Rupewrecht 10-07-2007 03:18 PM

New i can get these (plus fees/shipping):

MS-01 Magnesium
http://www.mazda.co.jp/accessories/m...img/whe01p.jpghttp://www.mazda.co.jp/accessories/m...mg/whe012p.jpg
in 18x8, +40, 5x114.3. 114750yen per rim

MS-01S
http://www.mazda.co.jp/accessories/m...img/whe02p.jpghttp://www.mazda.co.jp/accessories/m...mg/whe022p.jpghttp://www.mazda.co.jp/accessories/m...mg/whe023p.jpg
17x7.5, +40, 5x114.3 - 63000yen per rim.
18x8, +40, 5x114.3 - 69300yen per rim.
19x8, +40, 5x114.3 77700yen per rim.

DavoAust 04-12-2007 02:31 PM

those MS-01S are still the hottest rims around here... too bad they cost so much and are 5 stud :(

Abaddon 01-07-2008 09:18 AM

Are the Mazdaspeed Wheels always five stud?

Rupewrecht 01-07-2008 09:35 AM

Quote:

Originally Posted by Abaddon (Post 169065)
Are the Mazdaspeed Wheels always five stud?

From what i've seen:

MS-01Rs are 4 stud, but only come in 14-15 inch
MS-01Fs are 5 stud, and are 16-17 inch
MS-01Cs are 5 stud, and are 17-18 inch
MS-01Ss can be either, but the 4 stud ones are usually 15-16 inch, while the 5 stud are 16-18 inch

The MS-03s come in 4 stud as well though, and the MS-Tourings are 4 and 5 stud. MS-02s are 5 stud only.

93_Festiva 01-07-2008 07:29 PM

Has there been much come up in the 4x114.3 +40 or is it mainly 4x100 +40

Craig....

Rupewrecht 01-07-2008 07:35 PM

Quote:

Originally Posted by 93_Festiva (Post 169106)
Has there been much come up in the 4x114.3 +40 or is it mainly 4x100 +40

Craig....

Exclusively 4x100. I can't say i've ever seen a set of 4x114.3s at all.

But the 4x100 are either +35 or +38 depending on width, not +40.

mcwilly 14-07-2008 02:36 PM

any gun metal 18s with 4 stud in mint condition

Rupewrecht 14-07-2008 02:38 PM

Quote:

Originally Posted by mcwilly (Post 170045)
any gun metal 18s with 4 stud in mint condition

They don't exist.

02-KQ-LASR 21-07-2008 09:01 PM

these rims are light as right?

Rupewrecht 21-07-2008 09:10 PM

Quote:

Originally Posted by 02-KQ-LASR (Post 170551)
these rims are light as right?

Yeah, rims made by RAYS are generally pretty light for their size/construction.

mcwilly 14-08-2008 03:10 PM

with the 15x7 with 35 offset i wont have any problems with them fitting?

Rupewrecht 14-08-2008 03:26 PM

Quote:

Originally Posted by mcwilly (Post 172680)
with the 15x7 with 35 offset i wont have any problems with them fitting?

I wouldn't think so, but i'm not 100% with BG fitment.
It depends how low your car is - i'd think that the back arches would be a problem area if there is going to be an issue.

According to the tyre calc, they'd be 9 mm closer to the struts, and 29 mm closer to the guard (compared to 14x5.5 +45 stockies).

Time to get out the tape measure, but don't forget that most tyres taper at the sides as they get closer to the tread so that will give you a little more clearance.

Mc_Nuggets 09-09-2008 05:13 AM

is the any ms-01s/18inc or 17inc Gunmetal ones, and quote for QLD shipped too please. pm me


All times are GMT +10. The time now is 05:03 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
2001- 2010 AstinaGT