need clutch cylinders for 91' GTX!! Are these standard Ausi 323 parts??
Hello all!!
For my first post I thought to ask ya,, I need new clutch master and slave cylinders for a 91' familia GTX.. Are these standard BG 323 parts or do I have to source something jp spec?? Thanks in advance!! Best regards, Mike. |
They will be standard parts I'm sure mate. Might have been different on the GTR, but the GTX shares most of its components with BG 323s.
|
they are slightly different from memory, but are interchangable and work the same.
|
Thanks so much for the heads up!!
I'll try em' out this kend' and post back results. Cheers! |
The clutch master cylinder for the BG 323 fits perfectly on the 91' familia GTX but the slave cylinder is a different part all together. Of course this makes perfect sense, being a turbo 4wd gearbox and all. Shall get to the bottom of that this week, maybe a TX3 part will suit?? (or maybe sprint auto gave me the wrong part.. possible)
What a massive job to get at the Clutch slave cylinder!! I had to remove the friken' front engine mount!! Good times :D |
Sounds like fun. The slave on fwd is easy as piss! The tx3 4wd box would probably be the same. Try searching Ford laser.com
|
the slave is different becasue of the difference bellhousing it bolts to.
yes a 4WD TX3 'turbo' slave will fit. hit up ford for one. |
SO!.. after checking out photos of various parts off ebay etc. It turns out Sprint Auto gave me a 99~2003 323 clutch slave cylinder and the one I pulled off the car looks exactly like the part I asked for, the 91' 323 cylinder.
Ah well. Money refunded. Lessons learned. |
All times are GMT +10. The time now is 01:01 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
2001- 2010 AstinaGT