BA V6 Radiator

[Brij]

As per my intro http://http://www.astinagt.com/forums/showthread.php?t=21775 I have a little project on the go.

The radiator appears to not fit properly. It looks like all the hoses fit in the right places. The mounts, top and bottom look like they are the right type. The electric fans look right. But.....

The whole unit looks about 20mm to wide. The mounts sit right on the outer edges of their mounting holes. The lower hose is up against a bit of body. The fans pick up the top and bottom mounts but miss the mounts to the side by about 10mm each side.

The radiator is a copper core and tanked unit. I would of expected an aluminium core and plastic tanks.

Does anyone know what this might be out of?

Are the units out of 4cyls the same as the V6?

I thought it may of been a bit bigger unit out of a similar vintage 626, Telsta, but they appear to have a radiator cap on the radiator itself.

Thanks for your help.

Peter

[project.r.racing]

I4 and V6 rad are different. auto and manual rads are different.