Chip on Klze 323f Ba

HaldV6 · 25-01-2012, 03:22 AM

Hey, i am new to this forum, i've bought a Mazda 323 F v6 (original kf-de) with a Straight neck KLZE engine, the ECU is the orginal kf-de and the maf too. i have read allot about it all, and i can't really find anything about chipping the kf-de ecu. the only oppertunity i have found, is too buy a megasquirt ecu and get a "dynoman" to chip it in?

Sorry for my bad english, im from denmark.

Just today i got it on dyno, and the result is 168hp and 240 NM , the newton is okay, but i know this engine have op to 210hp with the right chip/ecu so i really want to get the last hp :P.

thanks for helping

TheMAN · 01-02-2012, 04:50 AM

corksport in USA chips KL-DE ECUs with KL-ZE programming... maybe you can ask them if it is possible with your ECU? Or maybe the KL-ZE ECU is a direct fit?

_stuz_ · 01-02-2012, 05:30 AM

They should have 200bhp, after several years that figure will diminish and also it depend on the day and the dyno.

Was the reading at the wheels or flywheel ?

25-01-2012, 03:22 AM	#1
HaldV6 Junior Member Join Date: Jan 2012 Location: Denmark Car: 323F KLZE Posts: 1 View Photos By: HaldV6	Chip on Klze 323f Ba Hey, i am new to this forum, i've bought a Mazda 323 F v6 (original kf-de) with a Straight neck KLZE engine, the ECU is the orginal kf-de and the maf too. i have read allot about it all, and i can't really find anything about chipping the kf-de ecu. the only oppertunity i have found, is too buy a megasquirt ecu and get a "dynoman" to chip it in? Sorry for my bad english, im from denmark. Just today i got it on dyno, and the result is 168hp and 240 NM , the newton is okay, but i know this engine have op to 210hp with the right chip/ecu so i really want to get the last hp :P. thanks for helping

01-02-2012, 04:50 AM	#2
TheMAN Senior Member Join Date: Feb 2010 Location: USA Car: . Posts: 2,623	corksport in USA chips KL-DE ECUs with KL-ZE programming... maybe you can ask them if it is possible with your ECU? Or maybe the KL-ZE ECU is a direct fit? __________________ Protege FAQ, the best 323/Protege/Mazda3 resource enjoyed worldwide for 10 years

01-02-2012, 05:30 AM	#3
_stuz_ Junior Member Join Date: Sep 2010 Location: Scarborough U.K Car: 323F BJ 323F BA Posts: 73	They should have 200bhp, after several years that figure will diminish and also it depend on the day and the dyno. Was the reading at the wheels or flywheel ?