|
20-02-2008, 12:37 PM | #1 |
Senior Member
Join Date: Jan 2007
Location: Brisbane, Queensland
Car: Mazda 323 Astina BG
Posts: 658
|
Stickers on the back..
so i want to remove the 'mazda' and 'astina' stickers on the back of my bg..
i was told i could heat them up using a hairdryer and peel back with a blade but im worried that it wont heat up as much as it needs to and when i go to scrape it off with the blade, it will scratch my paint. ive seen the very hot heat guns the tint installers use to remove tint but they are so hot and for such a small sticker i dont think that it will work.. any suggestions thanks |
Sponsored Links |
20-02-2008, 12:58 PM | #2 |
The Hairy Mod
Join Date: Sep 2005
Location: southside ya'll and North Side, Brissy
Car: MINI Cooper S 2003
Posts: 8,110
|
hair dryer should do it...its just gotto melt the glue...you dont need to use a blade if your worried about your paint...just use your finger nails...turps might even get it to come off...
__________________
For All your crash repair panels & lights, clear lights contact us at
PANEL HOUSE 45 RANDALL ST SLACKS CREEK QLD 4127 PHONE : 07 3808 8737 FAX : 07 3808 8735 |
20-02-2008, 01:32 PM | #3 |
Senior Member
Join Date: Jan 2007
Location: Brisbane, Queensland
Car: Mazda 323 Astina BG
Posts: 658
|
and turps wont have any effect on the paint?
oh btw bourbs, ill prob come in tomoro to pick up the lights |
20-02-2008, 02:56 PM | #4 |
The Hairy Mod
Join Date: Sep 2005
Location: southside ya'll and North Side, Brissy
Car: MINI Cooper S 2003
Posts: 8,110
|
ive used turps on my car before to get a few things off...mine hasnt hadany side effects but my paint is alot newer so i dont no if it would effect the older paint job...
and no worries about the lights tomorrow got plenty...
__________________
For All your crash repair panels & lights, clear lights contact us at
PANEL HOUSE 45 RANDALL ST SLACKS CREEK QLD 4127 PHONE : 07 3808 8737 FAX : 07 3808 8735 |
|
|