|
07-02-2006, 11:59 PM | #1 |
Pandaspeed Racing
|
FS : [QLD] Short Shifter, suit any front wheel drive 323
hey ya guys and gals. I have up for sale as of ... now ... no wait a minute .. wait a minute ... NOW! a cut down stock SP20 shifter. that will fit any model astina or 323 sedan (as far as i know!)
gives a nice gear stick height and the effect of a shorter throw, plus its a fraction of the price of the TWM unit without the super tight (two hands on the gearstick and it still wont move style) shift! best reasonable offer wins (TWM was $160 landed so you tell me what is fair on this), ill repaint it for you too if you smile nicely enough. you will have to have an aftermarket knob, or screw the stock nob down with the use of lots of muscles as the thread for the knob is oversized slightly, but who uses the ****ty stock knob??
__________________
Life would be straight without twisties STOCK AS A ROCKET! •motor sport is dangerous and that accidents causing harm can and do happen and may happen to me. I accept the conditions of, and acknowledge the risks arising from, attending or participating in the event and being provided with the event services by CAMS and the Associated Entities I THINK I AM N2! |
Sponsored Links |
08-02-2006, 03:33 AM | #2 |
Senior Member
Join Date: Mar 2005
Location: neither here nor there
Car: 1990 R32 GTR
Posts: 1,289
|
Ill swap you for that strut brace
and I need to get a new nob. wait for it.... wait for it.... wait for it.... and noooow you can pay that statement out |
08-02-2006, 08:53 AM | #3 |
Driving a faster car now!
Join Date: Oct 2003
Location: Work, always at bloody work...
Car: Lotus ....... .
Posts: 5,217
|
you forgot to mention it's a twiggy motorsport item
|
08-02-2006, 10:31 AM | #4 |
Senior Member
Join Date: Sep 2004
Location: Logan prefecture
Car: Touge monster
Posts: 7,585
|
Heya peeps, I run a Chicaboo motorsports enhanced shortened stock shifter myself. I really like the feel of it, the throw could be a bit shorter, but it's not a $#!T to muscle into gears like the TWM is when you have a shot box...
And for those who think they will just shorten their stocko themselves? Errr, buy Nates, you get all the benefits without using fire, ice and acid trying to remove the strongest most powerful stickiest eurethane known to man from the stock cast weight after you spend hours delicately cutting and prioring that off! And then you have to sand it and repaint it 5 times... Anyone who's seen my car lately, that's the sort of look and feel you'll get from Nates. Gav. |
08-02-2006, 10:54 AM | #5 |
Junior Member
Join Date: Sep 2005
Location: Gold Coast australia
Car: nothing atm
Posts: 130
|
if it fits my car and is not too pricey, ill grab it off ya
__________________
|
08-02-2006, 11:20 AM | #6 |
Driving a faster car now!
Join Date: Oct 2003
Location: Work, always at bloody work...
Car: Lotus ....... .
Posts: 5,217
|
and not forgetting nate's is already threaded - 12mm thread
|
08-02-2006, 01:44 PM | #7 |
Senior Member
Join Date: Sep 2004
Location: Logan prefecture
Car: Touge monster
Posts: 7,585
|
That's right, after all the time it took me to shorten mine, I just bought a knob that goes on with grub screws so I didn't ruin my Mazda3 gearknob by rethreading it for a larger thread (has a steel thread from memory).
|
08-02-2006, 05:13 PM | #8 |
Pandaspeed Racing
|
how could i forget to mention its a genuine twiggymotorsport item!! yes this is a one of a kind people!
sold to the man in the turbo BG if anyone wants to have one cut down i know tim (323mazdabator) did his own. have a chat to him and he might be nice enough to do it for you for a fee. oh timmy??? also have a stock shifter for sale $15, if anyone wants it they can have it cut down then and still be able ot drive there car around
__________________
Life would be straight without twisties STOCK AS A ROCKET! •motor sport is dangerous and that accidents causing harm can and do happen and may happen to me. I accept the conditions of, and acknowledge the risks arising from, attending or participating in the event and being provided with the event services by CAMS and the Associated Entities I THINK I AM N2! |
07-03-2006, 11:00 PM | #9 |
Junior Member
Join Date: Jan 2006
Location: -
Car: -
Posts: 124
|
hey nate, have u managed to sell off that stock shifter of yours? is it the same as a bj1 series 1.6L astinas? and if so whats the chances of getting it to canberra, cheers mate
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS: [QLD] 2000 Mazda Astina 323 | HI-RES | For Sale/Wanted | 14 | 31-10-2006 11:20 PM |
FS: [QLD] Mazda 323 Turbo BG sedan | SedanBG | For Sale/Wanted | 1 | 14-06-2006 06:34 PM |
V6 rear wheel drive | mickasp | Performance & General Maintenance | 8 | 30-04-2006 08:55 PM |
Short Shifter | Chaino | Performance & General Maintenance | 16 | 27-02-2006 08:19 PM |
FS: [QLD] 323 BJ-II front bumper | chicaboo | For Sale/Wanted | 16 | 05-03-2005 11:02 PM |