what are you doing today? - Page 82

Clean_Cookie · 27-03-2013, 12:45 AM

We used to make little bunnies in aluminum moulds mum had/has. I got a bit sick after eating too many and sort of got turned off home made stuff

its pretty easy to make. I caused the dude at the servo to spit out his drink and almost fall off his chair after I answered his "what have you been up to today" question. Oops.

z100 · 27-03-2013, 11:43 AM

Graduation ceremony for Uni. Going to be a long night!

bjk · 27-03-2013, 12:13 PM

Quote:

Originally Posted by z100

Graduation ceremony for Uni. Going to be a long night!

Mine started at 10.30am. But we were told to be there at 8am, haha. Didn't take as long as I had expected, but because it was an occasion there was applause after every name.

z100 · 27-03-2013, 12:51 PM

Quote:

Originally Posted by bjk

Mine started at 10.30am. But we were told to be there at 8am, haha. Didn't take as long as I had expected, but because it was an occasion there was applause after every name.

Mine starts at 6pm, but also have to be there earlier to get gown etc. Hoping it doesn't go too long!

Ben · 27-03-2013, 10:55 PM

It's been a very eventful day for me. Slept in till 9:30 :O Did some uni work, went to uni for work (I work at the uni too

) Came home, played with paper mache (no jokes) failed at that, re-worked my assessment, finished that, did 18 pages of journal work for said assessment now i've collapsed in bed, gotta get me some sleep for my lovely 10 hour uni day tomorrow

oyeloo · 27-03-2013, 11:23 PM

3 uni bitches in a row i guess ill add my uni bitch too then.

Trying to do 3d packaging so were drawing bottles in illustrator. Turns out they are either too skinny or are fat and look like boobs and the dude who sat beside me had to point out the obvious that my "bottles" are boobs.

Clean_Cookie · 27-03-2013, 11:37 PM

Suppose they're your PET hate now (alongside the jokes)???
I had a crazy day at work. Project managers' were all stressing out and resulted in me ripping stuff we did yesterday down, marking out 20+ lights on a finished ceiling, then cutting them then being told they are now moving sideways. Remark and recut. Oh wait...they've now changed the size of the fittings to smaller... So I'm keeping the plasterer in a job I guess. Tomorrow he's on holidays, we have loads to do but its just me and another mate who's also got no idea...going to be a lot of phone calls and head scratching, then end up in the pub I guess...

Noble323 · 27-03-2013, 11:58 PM

Just finished playing basketball and won !

Ben · 10-04-2013, 10:18 AM

Just had an appointment with my tutor at uni (well, hes 2 years older than me, its more like friends) to talk about my website i was building. Needed some help at Jquery. I couldnt get a infinite scroll working, he's reading all my code and just literally puts in a ; and it works. I hate coding! haha.

Good news though, he said what i did was very advanced for our class so i should be expecting a good mark with a

face

Mad Mat · 10-04-2013, 10:27 AM

Quote:

Originally Posted by Ben

Just had an appointment with my tutor at uni (well, hes 2 years older than me, its more like friends) to talk about my website i was building. Needed some help at Jquery. I couldnt get a infinite scroll working, he's reading all my code and just literally puts in a ; and it works. I hate coding! haha.

Good news though, he said what i did was very advanced for our class so i should be expecting a good mark with a

face

haha nice work ben

what ur site address???

Ben · 10-04-2013, 10:31 AM

Quote:

Originally Posted by Mad Mat

haha nice work ben

what ur site address???

It's not up yet. It's just for uni, i had to remake quicksilvers website using Jquery. It'll be put up on my uni thing, i'll link you's when it's done.

I have a website though, but i've been suspended because i forgot to pay it

oyeloo · 10-04-2013, 10:38 AM

Quote:

Originally Posted by Ben

Just had an appointment with my tutor at uni (well, hes 2 years older than me, its more like friends) to talk about my website i was building. Needed some help at Jquery. I couldnt get a infinite scroll working, he's reading all my code and just literally puts in a ; and it works. I hate coding! haha.

Good news though, he said what i did was very advanced for our class so i should be expecting a good mark with a

face

Coding can eat a dick we are starting to learn that now, i was like GTFO!!!

ghetto3 · 11-04-2013, 05:34 AM

Im recovering after helping my brother move into his new duplex. Helped a bit too much and have stirred up a nerve in my back and have lost all feeling/movement in my right leg.
loooong painful night with no sleep. Seeing nuerosurgeon on friday to discuss spinal surgery again. Very reluctant to go this route though as there are significant risks involved.
Have a number of compression fractures at l4,l5 and discs are fubared. On a lighter note the surgery if it does happen will be in auchenflower so dont be strangers you locals if/when i get the slice and dice happening!

Mad Mat · 14-04-2013, 05:19 PM

What did i do today...

- picked up a Kris's FSZE, took it to his house and got it ready to be shipped in its engine crate.
- rebuilt/fixed Kris's FEZE intake manifold
- bought some new shelves/work bench as i have run out of room in my shed.
- packed up some pistons, rods, and FPR to be shipped to SLY323

didn't get enough time to clean said shed but there is always another day

marcs_sp20 · 14-04-2013, 05:24 PM

Jarrod not doing Kris' conversion?

Gave the leather interior a wipe over and checked all the coolant levels in the SP. Hasnt used a drop of oil since its last oil change 6000kms ago

Mad Mat · 14-04-2013, 05:54 PM

Quote:

Originally Posted by marcs_sp20

Jarrod not doing Kris' conversion?

Gave the leather interior a wipe over and checked all the coolant levels in the SP. Hasnt used a drop of oil since its last oil change 6000kms ago

Not my place to say anything marc its Between jarod and kris. I just offered my help to pick up and what not..

Ice88 · 14-04-2013, 07:20 PM

My contract doesn't look to be extended due to budget reasons meaning that my only chance of continual (uninterrupted employment) is a job that I applied for along with something like 150 (or 50) other people.

However its not very clear if the position that was opened up will be used or if ill even get the job due to said financial reasons. Sucks cause up and till bout a month ago they were clamoring to hire a bunch of people.

My laptop also broke, which means I needed a new one. I need a laptop for work and for the short course im hoping to start soon in Cocoa

These two conditions meant that the time table that I had for my engine meant another 2-5 months delay.

Just so happened that someone on the forums needed an engine

JDM323 · 14-04-2013, 07:47 PM

cleaned carby and fuel tank on ride on mower that has to date cost me $0 total, just have to sort the cutting deck now and clean the rubber off the cement from hooning on it 'skids and wheelies'

sikwitit · 14-04-2013, 08:56 PM

painted wheels

Clean_Cookie · 14-04-2013, 09:14 PM

Sucks heaps Kris. I'm out of a job in a few weeks for good. Until I can get my licenss and start as a tradie somewhere. Today I picked up a few couches for free and drove north and south 4 times. Also got to see my new room which I'm moving into in the next month or so! Super excited. Gonna have 6 cars and one garage. Looks like the project will be living outside

maybe once its painted I'll have a bargaining chip...pretty tightly packed. Less than a meter one side from the neighbors and about 100mm from the house on the other side...

27-03-2013, 12:45 AM	#1621
Clean_Cookie obsessed-incomplete-broke Join Date: Oct 2008 Location: Brisbane Car: BA Hardtop/Hatch Posts: 5,441	We used to make little bunnies in aluminum moulds mum had/has. I got a bit sick after eating too many and sort of got turned off home made stuff its pretty easy to make. I caused the dude at the servo to spit out his drink and almost fall off his chair after I answered his "what have you been up to today" question. Oops. __________________ Worklog

27-03-2013, 11:23 PM	#1626
oyeloo AstinaGT Regular Join Date: Oct 2012 Location: Springwood, Brisbane Car: 2003 Astina SP20 Posts: 414	3 uni bitches in a row i guess ill add my uni bitch too then. Trying to do 3d packaging so were drawing bottles in illustrator. Turns out they are either too skinny or are fat and look like boobs and the dude who sat beside me had to point out the obvious that my "bottles" are boobs. __________________ "BUTTERS" MOD THREAD

27-03-2013, 11:37 PM	#1627
Clean_Cookie obsessed-incomplete-broke Join Date: Oct 2008 Location: Brisbane Car: BA Hardtop/Hatch Posts: 5,441	Suppose they're your PET hate now (alongside the jokes)??? I had a crazy day at work. Project managers' were all stressing out and resulted in me ripping stuff we did yesterday down, marking out 20+ lights on a finished ceiling, then cutting them then being told they are now moving sideways. Remark and recut. Oh wait...they've now changed the size of the fittings to smaller... So I'm keeping the plasterer in a job I guess. Tomorrow he's on holidays, we have loads to do but its just me and another mate who's also got no idea...going to be a lot of phone calls and head scratching, then end up in the pub I guess... __________________ Worklog

14-04-2013, 05:19 PM	#1634
Mad Mat HONEYWELL REPRESENT Join Date: Aug 2005 Location: Salisbury - Inner City Car: 1997 BA Hardtop - Had a 2003 BJii J48 Sport20, and 2x bg SOHC astina hatches Posts: 5,011 View Photos By: Mad Mat	What did i do today... - picked up a Kris's FSZE, took it to his house and got it ready to be shipped in its engine crate. - rebuilt/fixed Kris's FEZE intake manifold - bought some new shelves/work bench as i have run out of room in my shed. - packed up some pistons, rods, and FPR to be shipped to SLY323 didn't get enough time to clean said shed but there is always another day __________________ PROJECT "Catalina" 1994 323 BG Hatch 2005-2007 Crashed into truck 1991 323 BG Hatch 2007-2008/9 SOLD 2003 BJ SP20 J48 Hatch 2008-2011 Regretfully SOLD 1997 BA I4 Sedan 2012-CURRENT 1985 BF 323 Hatch 2014-2015SOLD 1989 MX5 2015-2015

14-04-2013, 05:24 PM	#1635
marcs_sp20 Moderator Join Date: Oct 2005 Location: Ipswich, Queensland Car: 2002 Mazda Astina SP20 2006 Mazda 6 GY Wagon Posts: 9,769 View Photos By: marcs_sp20	Jarrod not doing Kris' conversion? Gave the leather interior a wipe over and checked all the coolant levels in the SP. Hasnt used a drop of oil since its last oil change 6000kms ago __________________

27-03-2013, 11:43 AM	#1622
z100 Senior Member Join Date: Jul 2011 Location: Melbourne Vic Car: 2003 Protege Sp20 Posts: 642	Graduation ceremony for Uni. Going to be a long night!

27-03-2013, 10:55 PM	#1625
Ben Senior Member Join Date: Jun 2011 Location: Sunshine Coast Car: MPS Posts: 1,939	It's been a very eventful day for me. Slept in till 9:30 :O Did some uni work, went to uni for work (I work at the uni too ) Came home, played with paper mache (no jokes) failed at that, re-worked my assessment, finished that, did 18 pages of journal work for said assessment now i've collapsed in bed, gotta get me some sleep for my lovely 10 hour uni day tomorrow

27-03-2013, 11:58 PM	#1628
Noble323 E74A Join Date: Nov 2004 Location: Sydney Car: SP20 Posts: 1,248	Just finished playing basketball and won !

10-04-2013, 10:18 AM	#1629
Ben Senior Member Join Date: Jun 2011 Location: Sunshine Coast Car: MPS Posts: 1,939	Just had an appointment with my tutor at uni (well, hes 2 years older than me, its more like friends) to talk about my website i was building. Needed some help at Jquery. I couldnt get a infinite scroll working, he's reading all my code and just literally puts in a ; and it works. I hate coding! haha. Good news though, he said what i did was very advanced for our class so i should be expecting a good mark with a face

11-04-2013, 05:34 AM	#1633
ghetto3 Senior Member Join Date: Sep 2011 Location: north coast nsw Car: 97 ba 1.8 323 Posts: 799	Im recovering after helping my brother move into his new duplex. Helped a bit too much and have stirred up a nerve in my back and have lost all feeling/movement in my right leg. loooong painful night with no sleep. Seeing nuerosurgeon on friday to discuss spinal surgery again. Very reluctant to go this route though as there are significant risks involved. Have a number of compression fractures at l4,l5 and discs are fubared. On a lighter note the surgery if it does happen will be in auchenflower so dont be strangers you locals if/when i get the slice and dice happening!

14-04-2013, 07:20 PM	#1637
Ice88 Senior Member Join Date: Jun 2008 Location: Auchenflower, Brisbane Car: Blue SP20 Posts: 2,782	My contract doesn't look to be extended due to budget reasons meaning that my only chance of continual (uninterrupted employment) is a job that I applied for along with something like 150 (or 50) other people. However its not very clear if the position that was opened up will be used or if ill even get the job due to said financial reasons. Sucks cause up and till bout a month ago they were clamoring to hire a bunch of people. My laptop also broke, which means I needed a new one. I need a laptop for work and for the short course im hoping to start soon in Cocoa These two conditions meant that the time table that I had for my engine meant another 2-5 months delay. Just so happened that someone on the forums needed an engine __________________ Last edited by Ice88; 14-04-2013 at 07:24 PM.

14-04-2013, 07:47 PM	#1638
JDM323 Senior Member Join Date: May 2011 Location: North Qld Car: 2002 BJ2 protege Posts: 1,241	cleaned carby and fuel tank on ride on mower that has to date cost me $0 total, just have to sort the cutting deck now and clean the rubber off the cement from hooning on it 'skids and wheelies' __________________ http://www.astinagt.com/forums/showthread.php?t=18798 WORKLOG

14-04-2013, 08:56 PM	#1639
sikwitit AstinaGT Regular Join Date: Aug 2011 Location: ryde Car: ford laser sr2 Posts: 395	painted wheels

14-04-2013, 09:14 PM	#1640
Clean_Cookie obsessed-incomplete-broke Join Date: Oct 2008 Location: Brisbane Car: BA Hardtop/Hatch Posts: 5,441	Sucks heaps Kris. I'm out of a job in a few weeks for good. Until I can get my licenss and start as a tradie somewhere. Today I picked up a few couches for free and drove north and south 4 times. Also got to see my new room which I'm moving into in the next month or so! Super excited. Gonna have 6 cars and one garage. Looks like the project will be living outside maybe once its painted I'll have a bargaining chip...pretty tightly packed. Less than a meter one side from the neighbors and about 100mm from the house on the other side... __________________ Worklog