|
20-05-2013, 08:10 PM | #1521 | |
Administrator
Join Date: Mar 2002
Location: melb.vic.au
Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle
Posts: 16,525
|
Quote:
The MS seats to cater to larger frames - the lower bolsters can be bent outwarns, and the shoulders aren't super-huggy.
__________________
jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--|--SLOWTEGE--|--BEETLE--|--SUBSTITUTE--|--AZ-1 |
|
20-05-2013, 08:43 PM | #1522 |
obsessed-incomplete-broke
Join Date: Oct 2008
Location: Brisbane
Car: BA Hardtop/Hatch
Posts: 5,441
|
In other words, buy these mesh seats and if you don't like them ill take them off your hands. Not in a financially wise position to buy these or I would have.
__________________
Worklog |
20-05-2013, 09:25 PM | #1523 |
Senior Member
Join Date: Jun 2008
Location: Auchenflower, Brisbane
Car: Blue SP20
Posts: 2,782
|
Dont you already have MS seats?
EDIT: Thanks guys
__________________
Last edited by Ice88; 20-05-2013 at 09:33 PM. |
21-05-2013, 02:46 AM | #1524 |
Junior Member
Join Date: May 2013
Location: Perth
Car: 1992 KH2 Laser TX3 AWD/Familia
Posts: 1
|
Hi,
Wondering if you still have the Mazdaspeed MS-01 - set of 4, in 15x6 +35 4x100. Regards Jason |
21-05-2013, 08:31 AM | #1526 |
Administrator
Join Date: Mar 2002
Location: melb.vic.au
Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle
Posts: 16,525
|
Sent you a PM
__________________
jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--|--SLOWTEGE--|--BEETLE--|--SUBSTITUTE--|--AZ-1 |
30-05-2013, 10:34 PM | #1527 |
Administrator
Join Date: Mar 2002
Location: melb.vic.au
Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle
Posts: 16,525
|
Just added: 30/5/2013
Enkei Turbo Mesh - set of 4, in 14x6.5 +10 4x114.3. Super rare, and this set is the version with black centres and machined faces. You won't see a set like this again any time soon - and no one at the next car meet will have these! A couple of marks here and there, but they're in pretty good condition considering they're probably 30 years old. $1130. Work Meister S1 2-piece - set of 4, in 16x7.5 +35 4x100. Polished lips, white faces with blue Work Wheels stickers. Excellent condition all round, apart from one small area of rash on one wheel as pictured. Lots of dish! Tyres are Falken Ziex ZE512 in 205/45R16 with decent tread. Also comes with Work anodised valves. Hard to find in this size. $SOLD. Yokohama Advan A3C - set of 4, in 14x6 +6 4x114.3. Good overall condition, with some rash that'd been cleaned up on all rims. Would come up well with a good polish! Very hard to find, especially as they're ~30 years old. Machined centres, anodised lips. $SOLD. Mazdaspeed MS-01F - pair, in 16x7 +35 5x114.3. Made by Rays Engineering, and are a forged one-piece wheel. Very strong and very light - under 6kg each. Excellent condition - the anodised lips are almost like new, and the silver faces are in good condition too. $320 Mazdaspeed centre covers for 15 inch MS-01 and MS-01R. Hard to find a full set these days. Silver, in good condition. Set of 4. $110.
__________________
jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--|--SLOWTEGE--|--BEETLE--|--SUBSTITUTE--|--AZ-1 Last edited by Rupewrecht; 19-11-2013 at 10:52 PM. |
04-06-2013, 10:38 PM | #1528 |
Administrator
Join Date: Mar 2002
Location: melb.vic.au
Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle
Posts: 16,525
|
Just Added: 04/06/2013
Maxim Works titanium front strut brace for NA & NB MX-5. Crazy rare, no longer available. Rose joined end. Quite light. $229. Mazdaspeed 4-point roll bar for NA & NB MX-5. Chrome version, in excellent condition. Stiffens the car, adds safety, and mounts to factory holes. Fits under hard- and soft-top. $435. Zoom Engineering carbon gauge hood for NA MX-5. Square-cut version in good condition, but does have a couple of yellowing spots on the inside. $221 ARC Magic Super Intake for NA6 1.6 MX-5. Handmade from alloy, in good condition. Increases response and reduces heat soak. Comes with silicone joiners for plug-and-play replacement. $SOLD Carbing front strut brace for NA & NB MX-5. Comes with adjustable brake master cylinder stopper. Excellent condition, alloy version - very light and strong. $181 Zoom Engineering vented headlight cover intake for NA MX-5. Comes with a free OEM one! $132 Cusco rear subrframe brace for NA MX-5. No bends or cracks. $SOLD GR Craft carbon fibre radiator air diversion cooling panel for NA MX-5. $144 Garage Vary Nostalgic Tail Light Set for NA MX-5. Brand new from GV, with the required Mazda and Daihatsu lights to complete it. Made of FRP. Really changes the look of the back! Comes with all fitting instructions. $SOLD
__________________
jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--|--SLOWTEGE--|--BEETLE--|--SUBSTITUTE--|--AZ-1 Last edited by Rupewrecht; 18-07-2013 at 04:22 PM. |
06-06-2013, 12:09 PM | #1529 |
Junior Member
Join Date: Jun 2013
Location: Sydney
Car: Na6ce
Posts: 1
|
Carbing front strut brace for NA & NB MX-5. Comes with adjustable brake master cylind
Hi there,
Just wondering if this was still for sale? If so how much for shipping to Sydney? Thank You, Andrew. |
06-06-2013, 11:48 PM | #1530 |
Administrator
Join Date: Mar 2002
Location: melb.vic.au
Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle
Posts: 16,525
|
Still for sale, and it'd be $216 to metro Sydney
__________________
jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--|--SLOWTEGE--|--BEETLE--|--SUBSTITUTE--|--AZ-1 |
08-06-2013, 07:04 PM | #1531 |
Administrator
Join Date: Mar 2002
Location: melb.vic.au
Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle
Posts: 16,525
|
Just added: 8/6/13
Mazdaspeed leather steering wheel. 360mm, smooth finish. Made by Momo for Mazdaspeed in the '90s. The leather is in excellent general condition, and the anodised black centre is good but does have some slight pitting marks. $SOLD Mazdaspeed exterior badges. Made of plastic, and from the mid-'80s mid/late-'90s period. Red one is used, the silver is brand new. Affixes with doublesided tape. Extremely hard to find these days - especially a new one! Red $55, Silver $70 Mazdaspeed Sport seat in black. Synthetic leather outer with Mazdaspeed graduated meshed fabric in the centre. Quick tilt handles on the side, rotating handle on the side to adjust the angle, and an integral slide mechanism in the base. Excellent condition, with the only flaw being a small burn in the base as pictured. Will fit most 80s+ Mazdas with the appropriate mounts. $SOLD Mazdaspeed Time Trap lap timer. Mounts to MS, Momo and Nardi steering wheels. Clock, timer, split functions. o box, but comes with instructions. $SOLD Mazdaspeed Carbon-look Gearknob. Excellent condition. Fits most '80s+ Mazdas. $132 Mazdaspeed gauge pod with gauges for DY Demio / Mazda 2. the gauges are Volts, Oil Temp, Oil Pressure - so suitable for any car. 52mm gauges Some wiring but no senders. Mada by Defi for Mazdaspeed. $SOLD Mazdaspeed bonnet badge. Rotor shape, as used on rotary and piston engine Mazdas. Excellent condition. Metal with resin centre. $SOLD Mazdaspeed Sport seat in black. Synthetic leather outer with Mazdaspeed graduated meshed fabric in the centre. Quick tilt handles on the side, rotating handle on the side to adjust the angle, and an integral slide mechanism in the base. Excellent condition, with the only flaw being a small burn in the base as pictured. Will fit most 80s+ Mazdas with the appropriate mounts. Later-era seat without the 'MS" logo on the headrest. $SOLD
__________________
jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--|--SLOWTEGE--|--BEETLE--|--SUBSTITUTE--|--AZ-1 Last edited by Rupewrecht; 31-12-2013 at 10:08 AM. |
08-08-2013, 11:27 PM | #1532 |
Junior Member
|
|
12-08-2013, 09:39 PM | #1533 |
Administrator
Join Date: Mar 2002
Location: melb.vic.au
Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle
Posts: 16,525
|
Replied to your PM
__________________
jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--|--SLOWTEGE--|--BEETLE--|--SUBSTITUTE--|--AZ-1 |
28-09-2013, 09:27 PM | #1534 |
Junior Member
Join Date: Sep 2013
Location: Puerto Rico
Car: 2002 Protegé5 wagon (BJ)
Posts: 1
|
I am interested in buying that "Mazda Clean Box" for my BJ... I am new here...
[QUOTE=Rupewrecht;319319]Just added: 17/2/13
Mazda Clean Box for BJ 323 Astina & Protege. JDM accessories for the Familia, mounts to the centre console in passenger side footwell. Excellent condition, comes with screws and bracket. $73 |
10-11-2013, 06:57 PM | #1535 |
Administrator
Join Date: Mar 2002
Location: melb.vic.au
Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle
Posts: 16,525
|
Just Added: 10/11/13
A set of Mazdaspeed MS-01S in 16x7 +33 4x100. Made by Rays Engineering, and a forged monoblock wheel - which means very light (~5.5kg) and very strong. Good condition, the paint has a few blemishes but they're still quite presentable. Tyres are Dunlop LeMans LM702 with 4-5mm of tread. Crazy rare - i know of only one other set in Australia (i i brought those in too!) AUD$SOLD A set of Mazdaspeed MS-01R, in 15x7 +35 4x100. Pretty good condition overall - one tiny bit of rash on one lip as pictured, some crazing in the anodised finish on the silver lips (which is pretty common after 20+ years) and the faces are in great condition. Tyres are Brigestone Potenza GIII in 195/50R15 with plenty of tread. And they're complete with centre caps and covers, which is unusual after all this time. AUD$780 A set of Mazdaspeed MS-01S, sized in 15x6.5 +35 4x100. A forged monoblock wheel made by Rays Engineering - at 5.3kg ea they're just as light and strong as a TE37 or CE28N. Finished in white and in almost perfect condition, with the Rays and Mazdaspeed stickers intact, plus Rays carbon centre caps. Tyres are Yokohama DNA S-Drive in 195/50 R15 wih 5mm tread. AUD$SOLD A set of Mazdaspeed Aero Disc wheels in 14x6 +40 4x114.3. The only set of Mazdaspeed wheels to ever be released in 4x114.3! Designed to fit the GC 626/Capella and BF 323/Familia. Good condition, but would need some small bends and a repaint to be perfect. Comes with the optional centre caps. Probably the only set you'll ever see for sale - period. Want early-mid '80s period-correct? This is it. AUD$526 A set of Mazdaspeed MS-01S - perfect for FC & FD RX-7. Anodised/machined lips, with gold centres. Sizing is 17x8.5 +40 and 17x9.5 +38, in 5x114.3. Forged monoblock wheels, made by Rays Engineering - super light! Great condition, with only 2 spots of light rash on one wheel that'd be easy to clean up. Tyres are Yokohama DNA S-Drive in 235/45R17 & 255/40R17 with about 5mm of tread. (I can even make these a full set of 17x8.5 if that's what you need). AUD$SOLD A set of Mazdaspeed MS-01S, sized in 15x6.5 +35 4x100. A forged monoblock wheel made by Rays Engineering - at 5.3kg ea they're just as light and strong as a TE37 or CE28N. Finished in Bronze and in great condition apart from some minor gutter rash as pictured. Tyres are Yokohama Advan Neova AD07 in 195/50 R15 with 4-6mm tread. $SOLD A set of Mazdaspeed MS-01R wheels, in the only size they came in - 15x7 +35 4x100. Gold faces, anodised lips. In good condition, with a few small marks on the lips and faces as pictured, and some crazing in the clearcoat on the lips. OEM fitment for the NA MX-5, but will suit pretty much any 4x100 car. AUD$SOLD A set of Mazdaspeed 747 in 14x6 +45 4x100. Designed for the NA MX-5 before the MS-01R was released, and standard fitment on the Mazdaspeed Type-B BG Familia. Very rare, finished in dark gunmetal centres with polished lips. Good condition, but the lips could use a polish to be perfect. AUD$492 A set of bronze Mazdaspeed MS-01S is sized in 17x8.5 with a +40 offset and in 5x114.3 stud pattern. Perfect for FWD or 4WD. They're a one-piece forged wheel, made by Rays Engineering - the same construction and lightweight as TE37s and LM GT4s. This set has a little gutter rash but otherwise in good condition. Very hard to find as a non-staggered set - usually these are paired with 17x9.5 +38s. $SOLD
__________________
jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--|--SLOWTEGE--|--BEETLE--|--SUBSTITUTE--|--AZ-1 Last edited by Rupewrecht; 08-04-2014 at 11:52 AM. |
10-11-2013, 07:48 PM | #1536 |
Administrator
Join Date: Mar 2002
Location: melb.vic.au
Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle
Posts: 16,525
|
Just Added: 10/11/13
A set of Work BRS Poison, made by Work Wheels. Staggered sizing of 16x7 / 16x8 with a +33 offset all round, and in 5x114.3. Silver centres and polished barrels. In pretty good condition, with just a few small marks on the lip edges. A true 3-piece wheel, with a tough '90s 5-spoke design. AUD$740 A set of Desmond Regamaster Evo in 17x8 +35 5x114.3. Excellent condition, with only a tiny bit of rash on one and a small chip on the other as pictured. Complete with centre caps. A forged monoblock wheel - light and strong. Hard to find in same-sizing, and hard to find in bronze! $SOLD A set of mint Weds Albino Racing Aero Saucers in pretty much perfect condition. Sizing is 15x7, +20, 4x114.3 No rash, no bends, lips are still highly polished, and the paint/signage on the centres is unmarked. The only flaw with these is that two of the centre caps are missing. Not even any corrosion on the back - I'd say these had tyres mounted and that's about it. Tyres are Dunlop Direzza DZ101 in 205/50R15 with about 5mm tread. An extremely rare wheel in virtually perfect condition. $SOLD A set of Enkei Big End Rodder, in 15x8 with a staggered offset of +25 and +20, and 4x100 stud pattern. Great condition, with only some light rash on the +20 pair. Very hard to find in this fitment, not helped by being discontinued by Enkei over a decade ago. Tyres are Toyo Tranpath in 175/50R15 with decent tread, and Advan A048 semis in 225/50R15 that are down to the wear markers. Lots of concave and dish with these! $SOLD A set of Enkei Super Aspire race fin wheels, in 15x6.5 +19 4x114.3. Great condition, with polished lips and white highlights on the side of the spokes. Gold bolts, and the Super Aspire caps are complete. One wheel does have a couple of minor bends in the lip (as pictured) - but these still hold air, and its easy to get rerolled. A very rare wheel! AUD$SOLD A set of mint Mugen Power CF-48, in 14x6 +38 4x100. I buy 'em cos i love 'em. This polished lip/gunmetal centre set comes with the incredibly hard-to-find aero disc covers, in a brushed aluminium finish. Two small bits of rash as pictured but otherwise unmarked, and the covers are in great shape. Tyres are 185/60R14 Yoko AVID with heaps of tread. Perfect for your oldschool Honda! $SOLD A set of WedsSport SA-70 wheels, sized in 17x8 with a +32 offset and in 5x114.3 stud pattern. Professionally sprayed satin black, and in perfect condition. Lots of brake clearance with these. A classic multispoke design from one of the lesser-known JDM wheel manufacturers. Great for FWD, RWD and AWD cars. AUD$SOLD A set of Work Meister S1 2PC, in 17x8 with a +32 offset all round, in 5x114.3 stud pattern. Polished lip, white centres and with good Bridgestones in 225/45R17. Great condition! $SOLD A set of Mugen Power CF-48, sized in 15x6 +38 4x100. Extremely rare in 15 inch, and hard to find in such good condition. Finished in gloss white which is in great condition (but not perfect), complete with centre caps and badges. No rash, bends etc. Perfect for your oldschool Honda! $SOLD A set of WedsSport SA-90, sized in 16x7 +36 4x100. Factory pearl white finish, in good general condition, but some minor gutter rash on the lips as pictured. These are quite rare in pearl white - and the finish really pops in the sun! Tyres are Bridgestone Playz in 195/50R16 which have a little life left. Great for most FWD, great for street or track. AUD$SOLD A pair of Work Meister S1 2PC, in 17x7 with a +38 offset, in 5x114.3 stud pattern. Polished lip, silver centres, paint in good condition but one centre around the nuts has been repainted. Lips are in condition but do have some cleaned up rash in one spot. AUD$628
__________________
jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--|--SLOWTEGE--|--BEETLE--|--SUBSTITUTE--|--AZ-1 Last edited by Rupewrecht; 25-10-2014 at 10:19 PM. |
10-11-2013, 10:16 PM | #1537 |
Administrator
Join Date: Mar 2002
Location: melb.vic.au
Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle
Posts: 16,525
|
Just Added:
A set of Carving Wilcox Innovator, in 15x6.5 +32 4x100. True JDM wheels made by Enkei Wheels. White finish, in great condition but does have a couple of small scuffs as pictured. Chuck a set of spacers behind these and they'd look awesome stanced out. Very unique - you wont see another set of these! AUD$SOLD A set of Volk Racing SE37K, in 16x7 +38 4x100. One of the rarer Rays Engineering forged monoblock wheels, perfect for track or street due to light weight and high strength. Great condition, but there is some touched-up minor gutter rash on a couple of wheels as pictured. Tyres are Dunlop Direzza DZ101 in 195/45R16 with about 5mm of tread. Lighter than the equivalent TE37! AUD$SOLD A set of Volk Racing TE37, in 16x7 +33 4x100 +33. A lightweight forged monoblock wheel made by Rays Engineering, perfect for track or street. Wite finish version, with blue stickers. Good condition, but with a little light gutter rash - easy to touch up. Long discontinued by Rays, and very hard to find in +33. AUD$SOLD A set of Hayashi Racing 'Street II' wheels, in 14x6.5, +9 offset, and 4x114.3 stud pattern. Pretty good condition for something made in 1981 - just a small a mount of rash on a couple of lips that would be easy to clean up. Silver centre version, and fairly rare to find a set of classic JDM wheels like these. AUD$640 A set of Speed Star Racing 'Colin', in staggered sizing of 14x6.5 +8 / 14x7 ±0, in 4x114.3 PCD. Polished barrels, gold/machined faces. Pretty good general condition, but some minor gutter rash on all and a small bend on the edge of one wheel. The first SSR wheel to bear the name Colin - and extremely rare. Comes with a complete set of centre caps. Pretty cool for something over 40 years old! AUD$SOLD SSR Professor SP-1, set of 4. Sizing is 16x7 +32 Lo-Disc and 4x100 stud pattern. Silver faces, polished barrels, heaps of dish. Pretty good condition, with a couple of chips on the faces that have been retouched, and some gutter rash that's been tidied up (that you'd only notice if you knew it was there). Tyres are Bridgestone Playz PZ-X in 205/45R16, with good tread on one pair and down to the wear markers on the other. $SOLD A pair of SSR Professor SP-1R, in 15x8 +21 B-Face 4x100. Lots of dish. White centres, polished lips, and in good condition. No gutter rash but the lips need a polish to be perfect, and one face has been touched up - but this is common with Work paint. Tyres are Federal RS-R in 205/50ZR15 with a little bit of tread left. AUD$550 A set of SSR Vienna Kreis, in 15x6.5 +26 AA-Face, with multi-stud 4x100 and 4x114.3. Very unusual as these actually have a fairly decent amount of dish - usually these are pretty much flat-faced in 15 inch. Good condition - the faces are in excellent condition, but the lips do have some shallow gutter rash that'd be easy to have cleaned up. Perfect for a mini-VIP look! I bought them with the intention of going gloss black centres and matte black lips, but the centres were too nice to paint. AUD$786 A set of genuine Volk Racing CE28N, sized in 16x7 +33 5x100. These are a forged monoblock wheel - super strong an super light. Made in Japan by Rays Engineering. Discontinued by Rays, and only going to get harder to find! Original white finish, in excellent condition, with two tiny areas that have been touched up - invisible except under close inspection. No bends or cracks. These are the perfect track rims - plenty of brake clearance, and perfect for Subaru, Toyota, Volkswagen and Audi! Slightly negotiable for a quick sale! AUD$1430 A set of Volk Racing TE37, in 16x7 +42 4x100 +33. A lightweight forged monoblock wheel made by Rays Engineering, perfect for track or street. Wite finish version, with blue stickers. Good condition, but with a little light gutter rash and a couple of other marks - easy to touch up. Long discontinued by Rays. $SOLD
__________________
jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--|--SLOWTEGE--|--BEETLE--|--SUBSTITUTE--|--AZ-1 Last edited by Rupewrecht; 08-04-2014 at 11:51 AM. |
19-11-2013, 04:58 PM | #1538 |
Administrator
Join Date: Mar 2002
Location: melb.vic.au
Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle
Posts: 16,525
|
SOLD:
SSR Star Formula set in 14x6 +7 / 14x6.5 +15 4x100. $1150 Yokohama Advan A3C set in 14x6 +6 4x114.3. $486 Enkei Big End Rodder pair in 15x8 +20 4x100. $525 Mazdaspeed MS-01R Set in 15x7 +35 4x100 in red. $736 Mazdaspeed MS-02 Set in 17x9 +38 5x114.3 in silver. $590 Mazdaspeed MS-01S Set in 15x6.5 +35 4x100 in bronze. $1320 Weds Albino Racing Aero Saucer set in 15x6.5 +20 4x114.3. $865 Mazdaspeed Mirror Cover. New. $144 KG Works roll bar for NA/NB in chrome. $246 Mazdaspeed MS-01S Set in 17x8.5 +40 in Bronze. $1135 Mazda Service Overalls. New. $135 Zoom Engineering 'Lotus' Eunos Badge. New. $56 Mazdaspeed Mirror Cover for NB. $144 Zoom Engineering Carbon Gauge Hood for NA. $221 Momo Leather Airbag Steering Wheel. $176 Mazdaspeed Badge - Rotor. $132 Mazdaspeed Seat Brackets for NA/NB MX-5. RHS & LHS. $130 Mazdaspeed Seat Brackets for NA/NB MX-5. $66 Mazdaspeed Seat Brackets for FD RX-7. RHS. $66 Mazdaspeed Seat Brackets for FD RX-7. RHS. $66 Mazdaspeed Seat Brackets for FC RX-7. RHS. $66 Mazdaspeed Sport Seat in black. $515 Mazdaspeed Sport Seat in black. $515 Impul Hoshino Racing set in 15x6.5 +35 4x100. $920 Volk Racing TE37C set in 16x7 +33 4x100 in White. $1400 Volk Racing SE37K set in 16x7 +38 4x100 in Bronze. $1450 Mazdaspeed MS-01F Pair in 16x8 +40 5x114.3 in gold. $285 Mazdaspeed MS-01F Pair in 16x8 +40 5x114.3 in silver. $315 Weds Sport SA-90 set in 16x7 +35 5x114.3 in Bronze. $880 Gialla Aero Grille for BJI. $141 Volk Racing TE37C set in 16x7 +42 4x100 in White. $1270 Mazdaspeed MS-01LM Set in 17x7 +30/17x8 +35 5x114.3 in Silver. $625 Mazdaspeed MS-01S Set in 17x8.5 +40/17x9.5 +38 in Polished/Gold. $1440 WedsSport SA-70 set in 17x8 +32 5x114.3. $931 Mazdaspeed MS-01S Set in 16x7 +33 4x100 in white. $1470 Mazdaspeed MS-01S Set in 15x6.5 +35 4x100 in white. $1460 Mazdaspeed MS-02 Single in 17x9 +38 5x114.3 in silver. $110 Enkei Super Aspire set in 15x6.5 +19 4x114.3. $697 1500 RS Gauge Cluster. $136 Aero Rear Wing for Hatch. $247 AutoExe Carbon Ram Air Intake. $275 Mazdaspeed MS-01R Set in 15x7 +35 4x100 in gold. $630 Mazdaspeed MS-01R Pair in 15x7 +35 4x100 in gold. $335 Mazdaspeed MS-01LM Single in 17x9 +34 5x114.3 in Gold. $180 SSR Colin set in 14x6.5 +8 / 14x7 ±0 4x114.3. $970 Weds Sport Tri-spoke pair in 14x6 +12 4x114.3. $330 PIAA Rozza Monoblock set in 15x7 +35 4x100. $630 SSR XR-4 Longchamp centre caps. $138 Mazdaspeed Aero Disc Set in 15x6.5 +40 5x114.3 in white. $450 Mazdaspeed Strut Brace. $277 Mazdaspeed Exhaust Tip. $115 MintBlue Rear Wing for Hatch. 'WRC' version. $262 Mazdaspeed Rear Wing for Hatch. $282 WedsSport TC105N in 17x8 +32 5x114.3. $1430 AutoArt RX-8 Keyring. $19 Mazdaspeed Radiator Cap. Pink. 1.3 bar. New. $89 Mazdaspeed Seat Brackets for NA/NB MX-5. $66 Mazdaspeed Seat Brackets for NA/NB MX-5. RHS & LHS. $130 Roadster Stainless Door Sills for NA. $106 Zoom Engineering 3-gauge Tombstone for NA, with gauges. $355 *NEW* KG Works Stainless Tombstone Trim for NA. $145 Mazdaspeed DW Demio Ganador mirrors. New. $198 Toda Adjustable Cam Gear for B-Series. $155 AutoExe Stainless Muffler for Hatch. $285 RS*R Ti2000 Springs. $178 Familia Folding Mirrors. $130 Hatch Foglights. Early-type. $165 Mazdaspeed A-Spec Rear Wing for Hatch. $336 TRA Kyoto Drag4 set in 14x6.5 +14 4x100. $1218 Rays Versus Dolce Wide set in 15x8 +24 4x100. $868 Mazdaspeed 1999 Parts Catalogue. 180 pages. $45 Familia S-Wagon Shop Options Brochure. $15 Familia S-Wagon Briza Flyer. $15 Familia S-Wagon Brochure. $25 Cusco front Strut Brace for NA/NB. $142 Carbing front strut brace for NA/NB with MCS. $181 Mazdaspeed 4pt roll bar for NA/NB in chrome. $435 Fujitsubo Giken Exhaust Manifold for NA6. $287 CM's Mazda 1/64 BF/BG/SA Rally Model Collection. $128 Hatch Carbonfibre Eyelids. $170 'Lantis' rear garnish stickers - $12 Tanomi Lantis Hatch soft toy. $185 Foglight Switch. $30 Sport20 Badge. $46 Mazdaspeed Carbon-look dash insert for GV Capella. $158 Roadster Stainless Door Sills for NA. $106 Roadster Stainless Speaker Covers for NA. $154 Mazdaspeed A-Spec Type-I Wing for NA. $216 Zoom Engineering Vented Intake Headlight Cover for NA. $116 Zoom Engineering Vented Intake Headlight Cover for NA. $119 Zoom Engineering Vented Intake Headlight Cover for NA. $132 *NEW* ARC Magic Super Intake Chamber for NA6. $251 ARC Magic Super Intake Chamber for NA6. $251 ARC Magic Super Induction Airbox for FD. $138 AutoExe LCA Brace for FD. $167 Weds Sport SA-90 set in 16x7 +36 4x100 in White. $970
__________________
jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--|--SLOWTEGE--|--BEETLE--|--SUBSTITUTE--|--AZ-1 Last edited by Rupewrecht; 25-10-2014 at 10:18 PM. |
30-11-2013, 02:06 PM | #1539 |
Junior Member
Join Date: Nov 2013
Location: Kuala Lumpur
Car: Mazda Lantis
Posts: 1
|
Hi, the black MS seats still available? PM ur best offer please..
|
30-11-2013, 11:52 PM | #1540 |
Administrator
Join Date: Mar 2002
Location: melb.vic.au
Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle
Posts: 16,525
|
Sport or Type-F? I have a pair of both types. PM with your address and i can quote you on shipping. Do you require BA brackets as well?
__________________
jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--|--SLOWTEGE--|--BEETLE--|--SUBSTITUTE--|--AZ-1 |
Tags |
a-spec, auto exe, autoexe, exe, lantis, mazda, mazda speed, mazdaspeed, ms touring, ms-01, ms-01s, ms-02, ms-03, ms01, ms01r, ms01s, ms02, ms03, mx-5, rx7, seat, speed, type-f |
|
|